+ Post new Ad
(2) BOYAR SCHULTZ AND B&S ADJUSTABLE TOOL HOLDERS W/ 1" SHANKS, US $49.99 – Picture 0
(2) BOYAR SCHULTZ AND B&S ADJUSTABLE TOOL HOLDERS W/ 1" SHANKS, US $49.99 – Picture 0

(2) Boyar Schultz And B&s Adjustable Tool Holders W/ 1" Shanks

US $49.99

  • Chino, California, United States
  • Jan 30th
Open on mobile:
QR code
We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! NL Condition: Good Specifications: Capacity: 1"  Shank: 1"   Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted.  Shipping on Multiple Items: We charge the first item’s shipping in full, every item’s shipping cost after that will receive a 30% discount per item. This Only Applies To Tooling Items with a Total Gross Weight of Under 100 Lbs. Machines are Not Included in this Offer. This Will be Final on All Transactions Unless Prior Arrangements are Agreed Upon Before The End Of The Auction. Notice!! After purchasing and collecting your item, we would appreciate your feedback. If you could please leave a 5 star rating in all four of the applicable categories, it would be greatly appreciated. If you have any problems or issues, please contact us prior to leaving any feedback. We strive to provide the best service we can, and understand that mistakes are made in some cases. In the case of these mistakes, we will do whatever is necessary to rectify the situation. Furthermore, because of issues with past customers, we mark all our items to prevent any dishonest eBayer from trying to exchange our item with their old/non-working item. This type of behavior is unacceptable, and action will be taken against these buyers through eBay's policies by reporting them to eBay immediately. Here at MachineStation, we realize most people are honest, and do not practice techniques mentioned above. By the same token we are committed to provide superior customer service to all. Click Here. Double your traffic. Get Vendio Gallery - Now FREE!
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “7/10 GOOD!”

Directions

Similar products from Other Tool Retention Items

Magic Style Taper Shank Quick Release Chuck + Bendix Holder 3-AA-4

Magic Style Taper Shank Quick Release Chuck + Bendix Holder 3-AA-4

  • Leander, Texas, United States
  • Jan 30th
Modern Tool Works # 3 Tool Magic Chuck + Taper Shank

Modern Tool Works # 3 Tool Magic Chuck + Taper Shank

  • Leander, Texas, United States
  • Jan 30th
10-28 X 1" HIGH SPEED STEEL ROUND ADJUSTABLE DIE

10-28 X 1" HIGH SPEED STEEL ROUND ADJUSTABLE DIE

  • Petaluma, California, United States
  • Jan 30th
R8 SHANK END MILL HOLDER - 3/4" CAPACITY

R8 SHANK END MILL HOLDER - 3/4" CAPACITY

  • Chino, California, United States
  • Jan 30th
SYIC-84127, Type SSC1-1/4", 1" Straight Shank Collet for MLD Milling Chuck

SYIC-84127, Type SSC1-1/4", 1" Straight Shank Collet for MLD Milling Chuck

  • Chillicothe, Missouri, United States
  • Jan 30th
(2) BOYAR SCHULTZ ROLLER SUPPORT BOX TOOL HOLDERS W/ 3/4" SHANKS

(2) BOYAR SCHULTZ ROLLER SUPPORT BOX TOOL HOLDERS W/ 3/4" SHANKS

  • Chino, California, United States
  • Jan 30th
(2) BOYAR SCHULTZ ORT ROLLER SUPPORT BOX TOOL HOLDERS W/ 3/4" SHANKS

(2) BOYAR SCHULTZ ORT ROLLER SUPPORT BOX TOOL HOLDERS W/ 3/4" SHANKS

  • Chino, California, United States
  • Jan 30th
(2) BOYAR SCHULTZ 0RT & 2RT ROLLER SUPPORT BOX TOOL HOLDERS

(2) BOYAR SCHULTZ 0RT & 2RT ROLLER SUPPORT BOX TOOL HOLDERS

  • Chino, California, United States
  • Jan 30th
Kennametal DDJNR-164-D Tool Holder

Kennametal DDJNR-164-D Tool Holder

  • Galax, Virginia, United States
  • Jan 30th
(2) ROLLER SUPPORT BOX TOOL HOLDERS W/ 3/4" SHANKS

(2) ROLLER SUPPORT BOX TOOL HOLDERS W/ 3/4" SHANKS

  • Chino, California, United States
  • Jan 30th
VERY NICE ARMSTRONG STRAIGHT CUTTING TOOL BIT HOLDER 6" 618 ATLAS LATHE 1010-S

VERY NICE ARMSTRONG STRAIGHT CUTTING TOOL BIT HOLDER 6" 618 ATLAS LATHE 1010-S

  • United States
  • Jan 30th
SANDVIK COROMANT PCLNL 3225P 16 Carbide Inserts Lathe Tool Holder New

SANDVIK COROMANT PCLNL 3225P 16 Carbide Inserts Lathe Tool Holder New

  • Alvin, Texas, United States
  • Jan 30th
10" HEX DIE HOLDER HANDLE WRENCH

10" HEX DIE HOLDER HANDLE WRENCH

  • Lebanon, Tennessee, United States
  • Jan 30th
Cnmg turning tool holder with inserts

Cnmg turning tool holder with inserts

  • Alvin, Texas, United States
  • Jan 30th
Trw turning tool holder MDJNR-16-5 with inserts

Trw turning tool holder MDJNR-16-5 with inserts

  • Alvin, Texas, United States
  • Jan 30th
TORMACH SGTHR 19 - 4-X Lathe Tool Holder Carbide Inserts 3/4 SHAFT

TORMACH SGTHR 19 - 4-X Lathe Tool Holder Carbide Inserts 3/4 SHAFT

  • Athens, West Virginia, United States
  • Jan 30th
Drill Mill Chuck Tool Setting Clamp ATC (MDX-540/650)

Drill Mill Chuck Tool Setting Clamp ATC (MDX-540/650)

  • Long Beach, California, United States
  • Jan 30th
WF006L: Power Feed Contact Upper/Lower FANUC A290-8110-X750-L

WF006L: Power Feed Contact Upper/Lower FANUC A290-8110-X750-L

  • Irvine, California, United States
  • Jan 30th
LATHE TOOL HOLDER 2-R

LATHE TOOL HOLDER 2-R

  • Wadley, Alabama, United States
  • Jan 30th
Colbert Die Cast Co. (PanaVise) 310, Cast Iron Surface Plate

Colbert Die Cast Co. (PanaVise) 310, Cast Iron Surface Plate

  • Morrison, Colorado, United States
  • Jan 30th

People who viewed this item also vieved

PARLEC (?) CAT40 1/2" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C12388

PARLEC (?) CAT40 1/2" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C12388

  • Dayton, Ohio, United States
  • May 16th
SYIC Techniks 1" CAT40 Tool Holder

SYIC Techniks 1" CAT40 Tool Holder

  • Kenwood, California, United States
  • May 17th
KENNAMETAL STEEL BORING HEAD FOR CARBIDE BARS #12-CSKNR-4

KENNAMETAL STEEL BORING HEAD FOR CARBIDE BARS #12-CSKNR-4

  • Cadiz, Kentucky, United States
  • Jun 13th
Everede Tool Company SF6100 boring bar

Everede Tool Company SF6100 boring bar

  • New Britain, Connecticut, United States
  • Jun 14th
Valenite TPEW-322-PDJR inserts,30 pcs.

Valenite TPEW-322-PDJR inserts,30 pcs.

  • Phoenix, Arizona, United States
  • Jun 23rd
USED Kennametal Indexable drill DFT0750R2SSF100 (.75" Offset Up To .85")

USED Kennametal Indexable drill DFT0750R2SSF100 (.75" Offset Up To .85")

  • La Verne, California, United States
  • Jun 23rd
Jacobs Straight Shank Arbor A4003

Jacobs Straight Shank Arbor A4003

  • Chalfont, Pennsylvania, United States
  • May 25th
Jacobs Drill Chuck Arbor 3/4" #7365N 42 Morse X33JT

Jacobs Drill Chuck Arbor 3/4" #7365N 42 Morse X33JT

  • Salt Lake City, Utah, United States
  • May 25th
BROWNING SPLIT TAPER BUSHING Q1 1-5/8" BORE

BROWNING SPLIT TAPER BUSHING Q1 1-5/8" BORE

  • North Olmsted, Ohio, United States
  • May 26th
SKF SINGLE ROW RADIAL BEARING 16009

SKF SINGLE ROW RADIAL BEARING 16009

  • North Olmsted, Ohio, United States
  • May 26th
Lot of Four NIkken BT40 Tool Holders Lyndex, Others 1/2 Inch (Inv.35587)

Lot of Four NIkken BT40 Tool Holders Lyndex, Others 1/2 Inch (Inv.35587)

  • Portland, Connecticut, United States
  • May 28th
Lot of Four NIkken BT40 Tool Holders BT40-WE1/2-65 (Inv.35586)

Lot of Four NIkken BT40 Tool Holders BT40-WE1/2-65 (Inv.35586)

  • Portland, Connecticut, United States
  • May 28th
Sandvik RA215-A076C6-25M Capto C6 Plunge Milling Cutter Barely Used

Sandvik RA215-A076C6-25M Capto C6 Plunge Milling Cutter Barely Used

  • Calgary, Alberta, Canada
  • Jun 9th
MADISON DOUBLE DEEP RECESSER 7046-114-00000 MT #4 SHANK LOC2165

MADISON DOUBLE DEEP RECESSER 7046-114-00000 MT #4 SHANK LOC2165

  • Sidney, Ohio, United States
  • Jun 9th
Drill chuck-Black & Decker

Drill chuck-Black & Decker

  • Manchester Township, New Jersey, United States
  • Jun 9th
jacobs chuck ,,,,no. 32 gap 0-3/8

jacobs chuck ,,,,no. 32 gap 0-3/8

  • Victor, New York, United States
  • Jun 9th
Sunnen Complete Mandrel AK20-806 : S806 Sleeve, AK20-A Adapter, UB-B Shoe, Stone

Sunnen Complete Mandrel AK20-806 : S806 Sleeve, AK20-A Adapter, UB-B Shoe, Stone

  • Scottsdale, Arizona, United States
  • Jun 13th
Sunnen Complete Mandrel AK20-838 : S838 Sleeve, AK20-A Adapter, UB-B Shoe, Stone

Sunnen Complete Mandrel AK20-838 : S838 Sleeve, AK20-A Adapter, UB-B Shoe, Stone

  • Scottsdale, Arizona, United States
  • Jun 13th
Nema 34 2phase 8.5N.m 1204ozf.in stepperMotor 86mm frame 12.7mm 86J18118-842

Nema 34 2phase 8.5N.m 1204ozf.in stepperMotor 86mm frame 12.7mm 86J18118-842

  • DongGuan, China
  • Oct 27th
Nema 34 2phase 6.0N.m 850ozf.in stepperMotor 86mm frame12.7mm shaft 86J18101-450

Nema 34 2phase 6.0N.m 850ozf.in stepperMotor 86mm frame12.7mm shaft 86J18101-450

  • DongGuan, China
  • Oct 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies