+ Post new Ad
2 - Ends High Speed Center Drill Bits (Set of 16), US $38.00 – Picture 0
2 - Ends High Speed Center Drill Bits (Set of 16), US $38.00 – Picture 1
2 - Ends High Speed Center Drill Bits (Set of 16), US $38.00 – Picture 2
2 - Ends High Speed Center Drill Bits (Set of 16), US $38.00 – Picture 0
2 - Ends High Speed Center Drill Bits (Set of 16), US $38.00 – Picture 1
2 - Ends High Speed Center Drill Bits (Set of 16), US $38.00 – Picture 2

2 - Ends High Speed Center Drill Bits (set Of 16)

US $38.00

  • San Diego, California, United States
  • Mar 2nd
Open on mobile:
QR code
•Two bits with Diameter 5/8" and 3 " Length •One bit with Diameter 1/2" and 3" Length •Three bits with Diameter 7/16" and Lengths ranging from 4"-2 1/2" •Five bits with Diameter 5/16" and Lengths ranging from 6"-2 1/2" •Two bits with Diameter 1/4" and Lengths ranging from 5"-2" •Four bits with Diameter 3/16" and Lengths ranging from 3"-2"
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Very good condition”

Directions

Similar products from Solid Carbide Drill Bits

Toshiba Tungaloy TSD TSD175 17.5mm Coolant Through Carbide Tipped Drillbit

Toshiba Tungaloy TSD TSD175 17.5mm Coolant Through Carbide Tipped Drillbit

  • Atlanta, Illinois, United States
  • Mar 2nd
Toshiba Tungaloy TSD TSDU054 35/64" Coolant Through Carbide Tipped Drillbit

Toshiba Tungaloy TSD TSDU054 35/64" Coolant Through Carbide Tipped Drillbit

  • Atlanta, Illinois, United States
  • Mar 2nd
Toshiba Tungaloy TSD TSD125 12.5mm Coolant Through Carbide Tipped Drillbit

Toshiba Tungaloy TSD TSD125 12.5mm Coolant Through Carbide Tipped Drillbit

  • Atlanta, Illinois, United States
  • Mar 2nd
Set of 68 Solid Carbide Drill Bits

Set of 68 Solid Carbide Drill Bits

  • San Diego, California, United States
  • Mar 2nd
Set of 40 Solid Carbide Drill Bits

Set of 40 Solid Carbide Drill Bits

  • San Diego, California, United States
  • Mar 2nd
Set of 33 Solid Carbide Drill Bits

Set of 33 Solid Carbide Drill Bits

  • San Diego, California, United States
  • Mar 2nd
Set of 47 Solid Carbide Drill Bits

Set of 47 Solid Carbide Drill Bits

  • San Diego, California, United States
  • Mar 2nd
Hanita new Varimill Carbide long type END MILLS 1/4 -4 Flute

Hanita new Varimill Carbide long type END MILLS 1/4 -4 Flute

  • United States
  • Mar 2nd
2 - Ends Solid Carbide Center Drill Bits (Set of 34)

2 - Ends Solid Carbide Center Drill Bits (Set of 34)

  • San Diego, California, United States
  • Mar 2nd
2 - Ends Solid Carbide Center Drill Bits (Set of 70)

2 - Ends Solid Carbide Center Drill Bits (Set of 70)

  • San Diego, California, United States
  • Mar 2nd
50 Micro Carbide Drills /Watchmakers, machinists/Gunsmiths #57 to #1

50 Micro Carbide Drills /Watchmakers, machinists/Gunsmiths #57 to #1

  • Miami, Florida, United States
  • Mar 2nd
NEW Solid Carbide 3/4" HERTEL 3/4"x3/4"x1-1/2"x4"TiN 4 Flute

NEW Solid Carbide 3/4" HERTEL 3/4"x3/4"x1-1/2"x4"TiN 4 Flute

  • United States
  • Mar 2nd
Snap On VWB800d Carbide Burr Set

Snap On VWB800d Carbide Burr Set

  • Oklahoma City, Oklahoma, United States
  • Mar 2nd
7/32 High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc

7/32 High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc

  • Hastings, Michigan, United States
  • Feb 28th
17/64 High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc

17/64 High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc

  • Hastings, Michigan, United States
  • Feb 28th
13/32 3xD High Performance Carbide Drill TiALN Coated NEW Widia VariDrill™ 1pc

13/32 3xD High Performance Carbide Drill TiALN Coated NEW Widia VariDrill™ 1pc

  • Hastings, Michigan, United States
  • Feb 28th
7.4mm High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc

7.4mm High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc

  • Hastings, Michigan, United States
  • Feb 28th
23/64 High Performance Carbide Drill TiALN Coated 140° DP NEW Sumitomo 1pc

23/64 High Performance Carbide Drill TiALN Coated 140° DP NEW Sumitomo 1pc

  • Hastings, Michigan, United States
  • Feb 28th
solid carbide blanks

solid carbide blanks

  • Thomaston, Connecticut, United States
  • Feb 28th
SCRAP AND RE-USEABLE CARBIDE 20LBS

SCRAP AND RE-USEABLE CARBIDE 20LBS

  • Corona, California, United States
  • Feb 28th

People who viewed this item also vieved

Champion Carbide tipped hole cutter

Champion Carbide tipped hole cutter

  • Channelview, Texas, United States
  • Jan 30th
Lot New 1 pcs Straight Shank HSS Rolled Twist Drill Bits Dia 12.5 mm(.4921")

Lot New 1 pcs Straight Shank HSS Rolled Twist Drill Bits Dia 12.5 mm(.4921")

  • CN, China
  • Jan 30th
NEW DRIVE MASTER DRILL BIT Titanium Coated 7/64 No.9803 Lot of 5

NEW DRIVE MASTER DRILL BIT Titanium Coated 7/64 No.9803 Lot of 5

  • New Bedford, Massachusetts, United States
  • Jan 30th
New # 5 (.2055) cobalt taper drill tialn coated-Hertel

New # 5 (.2055) cobalt taper drill tialn coated-Hertel

  • United States
  • Feb 13th
Michigan Drill HSS 118 degree 12" Extra Long 1/2" Reduced shank Drill 21/32

Michigan Drill HSS 118 degree 12" Extra Long 1/2" Reduced shank Drill 21/32

  • McMinnville, Tennessee, United States
  • Feb 13th
1-1/4X9-1/2X15 COBALT DRILL (LW1862-1)

1-1/4X9-1/2X15 COBALT DRILL (LW1862-1)

  • Miami, Florida, United States
  • Feb 13th
LOT OF 3 HSS 4MT HEAVY DUTY MORSE TWIST DRILLS 1-27/64" TO 1-31/64"

LOT OF 3 HSS 4MT HEAVY DUTY MORSE TWIST DRILLS 1-27/64" TO 1-31/64"

  • Ellington, New York, United States
  • Feb 14th
LOT OF 3 HSS 4MT HEAVY DUTY TWIST DRILLS 1-15/64" TO 1-25/64" MORSE USA

LOT OF 3 HSS 4MT HEAVY DUTY TWIST DRILLS 1-15/64" TO 1-25/64" MORSE USA

  • Ellington, New York, United States
  • Feb 14th
LOT OF 3 HSS 4MT HEAVY DUTY TWIST DRILLS 1-9/32" TO 1-1/4" MORSE CHICAGO USA

LOT OF 3 HSS 4MT HEAVY DUTY TWIST DRILLS 1-9/32" TO 1-1/4" MORSE CHICAGO USA

  • Ellington, New York, United States
  • Feb 14th
2 3/8" DIA SPADE DRILL WITH #5 MORSE TAPER SHANK METALWORKING CUTTING TOOLS

2 3/8" DIA SPADE DRILL WITH #5 MORSE TAPER SHANK METALWORKING CUTTING TOOLS

  • Xenia, Ohio, United States
  • Feb 16th
SPADE DRILL WITH 2 3/8" DIA INSERT ABOUT 2" DIA WITHOUT INSERT METALWORKING TOOL

SPADE DRILL WITH 2 3/8" DIA INSERT ABOUT 2" DIA WITHOUT INSERT METALWORKING TOOL

  • Xenia, Ohio, United States
  • Feb 16th
Komet 1.25" Insert Drill ABS 50

Komet 1.25" Insert Drill ABS 50

  • Johnson City, New York, United States
  • Feb 16th
CHICAGO-LATROBE 49382 Screw Mach Drill, Heavy Dty, Blk Oxide, #12

CHICAGO-LATROBE 49382 Screw Mach Drill, Heavy Dty, Blk Oxide, #12

  • United States
  • Feb 21st
CLE-LINE C23473 Screw Mach Drill,HSS,Blk Oxide,17/64 In

CLE-LINE C23473 Screw Mach Drill,HSS,Blk Oxide,17/64 In

  • United States
  • Feb 21st
GUHRING 9005520038600 Screw Mach Drill,Parabolic,HSS,3.86mm

GUHRING 9005520038600 Screw Mach Drill,Parabolic,HSS,3.86mm

  • United States
  • Feb 21st
Qualtech DWDN18 HSS Black Oxide Jobber Length Drill Bit - #18 , (36pcs)

Qualtech DWDN18 HSS Black Oxide Jobber Length Drill Bit - #18 , (36pcs)

  • Los Angeles, California, United States
  • Feb 27th
Cleveland Twist 3/4" 2 Flute Ball End Mill (L697/C42550) Qty:4

Cleveland Twist 3/4" 2 Flute Ball End Mill (L697/C42550) Qty:4

  • Clearwater, Florida, United States
  • Feb 27th
Cleveland Twist 5/8" 2 Flute Ball End Mill (L697/C42660) Qty:3

Cleveland Twist 5/8" 2 Flute Ball End Mill (L697/C42660) Qty:3

  • Clearwater, Florida, United States
  • Feb 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies