+ Post new Ad
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 0
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 1
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 2
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 3
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 0
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 1
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 2
2 HEAVY DUTY CLAMPS - WILTON # 3 + AMERICAN MADE - PRICED 2 SELL, US $32 – Picture 3

2 Heavy Duty Clamps - Wilton # 3 + American Made - Priced 2 Sell

US $32

  • Coupeville, Washington, United States
  • Jan 30th
Open on mobile:
QR code
 I found these at an estate sale and figured someone out there in Ebayland could use a great deal. Both heavy duty clamps are used but still a lot of life left in them. The green colored one is a Wilton # 3 and the red one is ?. I have a hard time reading the print but it does say U.S.A. made. Both have 3" openings and are ready to be put to good use. Priced to sell and thanks for viewing.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Wilton

Directions

Similar products from Clips & Jaws

MACHINIST VINTAGE SLIDE PARRALELL CLAMPS

MACHINIST VINTAGE SLIDE PARRALELL CLAMPS

  • San Diego, California, United States
  • Feb 13th
J.H. William's & Co. Vulcan #6 Clamp Heavy Service Drop - Forged in USA

J.H. William's & Co. Vulcan #6 Clamp Heavy Service Drop - Forged in USA

  • Airway Heights, Washington, United States
  • Feb 13th
J.H. William's & Co. Vulcan #4 Clamp Heavy Service Drop - Forged in USA

J.H. William's & Co. Vulcan #4 Clamp Heavy Service Drop - Forged in USA

  • Airway Heights, Washington, United States
  • Feb 13th
J.H. William's & Co. #CC - 404 Deep Throat Clamp Drop Forged In USA

J.H. William's & Co. #CC - 404 Deep Throat Clamp Drop Forged In USA

  • Airway Heights, Washington, United States
  • Feb 13th
PROTO #3HD Clamp Drop Forged Steel Made In USA

PROTO #3HD Clamp Drop Forged Steel Made In USA

  • Airway Heights, Washington, United States
  • Feb 13th
PROTO #406 Clamp Drop Forged Steel Made In USA

PROTO #406 Clamp Drop Forged Steel Made In USA

  • Airway Heights, Washington, United States
  • Feb 13th
Billings AZ-113 Trade #2 Clamp Heavy Service Made In USA

Billings AZ-113 Trade #2 Clamp Heavy Service Made In USA

  • Airway Heights, Washington, United States
  • Feb 13th
DESTACO TOGGLE SQUEEZE CLAMPS MODEL 484 4 CLAMPS 1200 POUNDS CLAMPING FORCE

DESTACO TOGGLE SQUEEZE CLAMPS MODEL 484 4 CLAMPS 1200 POUNDS CLAMPING FORCE

  • Poway, California, United States
  • Feb 13th
PAIR OF CRAFTSMAN 66675 MALLEABLE C CLAMP 5" CAPACITY 2-1/2" THROAT

PAIR OF CRAFTSMAN 66675 MALLEABLE C CLAMP 5" CAPACITY 2-1/2" THROAT

  • La Puente, California, United States
  • Feb 13th
Starrett 161AA Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

Starrett 161AA Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

  • Wethersfield, Connecticut, United States
  • Jan 30th
ARMSTRONG No. 713 MACHINIST HOLD DOWN CLAMP

ARMSTRONG No. 713 MACHINIST HOLD DOWN CLAMP

  • Ceres, California, United States
  • Jan 30th
35 ATE Tools 6" Spring Loaded Metal Clamps Hobby Craft PVC Tip Lot Bulk Hand

35 ATE Tools 6" Spring Loaded Metal Clamps Hobby Craft PVC Tip Lot Bulk Hand

  • Weiner, Arkansas, United States
  • Jan 30th
*DE-STA-CO HOLDING CAPACITY PLIER CLAMP, MODEL 465B

*DE-STA-CO HOLDING CAPACITY PLIER CLAMP, MODEL 465B

  • Schwenksville, Pennsylvania, United States
  • Jan 30th
L S Starrett Toolmaker Machinist Parallel Clamp No. 161-AA USA

L S Starrett Toolmaker Machinist Parallel Clamp No. 161-AA USA

  • Phoenix, Oregon, United States
  • Jan 30th
Williams No. 104, 0-4 in. heavy duty, fine thread, C-clamp

Williams No. 104, 0-4 in. heavy duty, fine thread, C-clamp

  • Cocoa, Florida, United States
  • Jan 30th
13mm Plunger Stroke 50Kg 110 Lbs Push Pull Toggle Clamp

13mm Plunger Stroke 50Kg 110 Lbs Push Pull Toggle Clamp

  • Hong Kong, Hong Kong
  • Jan 30th
Starrett Parallel Clamps 161-B, Machinist

Starrett Parallel Clamps 161-B, Machinist

  • Athol, Massachusetts, United States
  • Jan 30th
Starrett Parallel Clamps 161A, Machinist

Starrett Parallel Clamps 161A, Machinist

  • Athol, Massachusetts, United States
  • Jan 30th
C CLAMPS WILTON ARMSTRONG LOT OF 8 CHEAP!!!TAKE A LOOK!!!!!!!!!!!!!!!!!!!!!!!!!!

C CLAMPS WILTON ARMSTRONG LOT OF 8 CHEAP!!!TAKE A LOOK!!!!!!!!!!!!!!!!!!!!!!!!!!

  • Shoreham, New York, United States
  • Jan 30th
PAIR OF SMALL MACHINIST CLAMPS, NO MANUFACTURES NAME SHOWN, 4" LONG

PAIR OF SMALL MACHINIST CLAMPS, NO MANUFACTURES NAME SHOWN, 4" LONG

  • Spokane, Washington, United States
  • Jan 30th

People who viewed this item also vieved

9 UNIVERSAL ENGINEERING ACURA FLEX COLLETS 3/4" SERIES USED ON KWIK SWITCH 200

9 UNIVERSAL ENGINEERING ACURA FLEX COLLETS 3/4" SERIES USED ON KWIK SWITCH 200

  • Dayton, Ohio, United States
  • Feb 22nd
HORIZANTAL VERTICAL 5C COLLET CHUCK CLOSER VISE FIXTURE

HORIZANTAL VERTICAL 5C COLLET CHUCK CLOSER VISE FIXTURE

  • North Hollywood, California, United States
  • Feb 22nd
5 UNIVERSAL ENGINEERING ACURA FLEX COLLETS 3/4" SERIES USED ON KWIK SWITCH 200

5 UNIVERSAL ENGINEERING ACURA FLEX COLLETS 3/4" SERIES USED ON KWIK SWITCH 200

  • Dayton, Ohio, United States
  • Feb 22nd
5" SINE PLATE , 3" x 6 1/2" , WITH SIDE RAILS.

5" SINE PLATE , 3" x 6 1/2" , WITH SIDE RAILS.

  • Berlin, Connecticut, United States
  • Feb 23rd
5 Inch Drive Plate D13 Mount

5 Inch Drive Plate D13 Mount

  • Sonora, California, United States
  • Feb 23rd
10 inch Shop Built Sine Plate

10 inch Shop Built Sine Plate

  • Santa Fe Springs, California, United States
  • Feb 23rd
CHAIN VISE / PIPE VISE, VULCAN NO. 2 . J.H.WILLIAMS & CO./PIPE BENDER BASE PLATE

CHAIN VISE / PIPE VISE, VULCAN NO. 2 . J.H.WILLIAMS & CO./PIPE BENDER BASE PLATE

  • Stuart, Virginia, United States
  • Feb 28th
Bench Vise 4" Swivel Pipe Holder Anvil Japan BF No. 5177, 16 Lbs Opens 4"

Bench Vise 4" Swivel Pipe Holder Anvil Japan BF No. 5177, 16 Lbs Opens 4"

  • San Diego, California, United States
  • Feb 28th
kurt vise handles

kurt vise handles

  • Alexandria, Minnesota, United States
  • Feb 28th
USED RITEN 12103 Dead Center Shank Tyoe

USED RITEN 12103 Dead Center Shank Tyoe

  • Bristol, Connecticut, United States
  • Mar 1st
8" 6-JAW SELF-CENTERING LATHE CHUCK w.solid jaws--0.003" TIR #K13-200---new

8" 6-JAW SELF-CENTERING LATHE CHUCK w.solid jaws--0.003" TIR #K13-200---new

  • Madison Heights, Michigan, United States
  • Mar 1st
Standard Tool No. 535 Size 2 60 Degree Dead Center 7443-120

Standard Tool No. 535 Size 2 60 Degree Dead Center 7443-120

  • Hillsdale, New Jersey, United States
  • Mar 2nd
Bruckner Precision Live Center Type R MT3 Made in Germany

Bruckner Precision Live Center Type R MT3 Made in Germany

  • Chillicothe, Ohio, United States
  • Mar 2nd
6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

  • Bloomington, California, United States
  • Mar 2nd
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck

  • Houston, Texas, United States
  • Mar 2nd
Tag ST375350, Metal tag band Joint or set up of 2 tags.

Tag ST375350, Metal tag band Joint or set up of 2 tags.

  • Prospect Heights, Illinois, United States
  • May 14th
MACHINIST LATHE MILL Setup / Holding Blocks Parallels Lot Nice Condition

MACHINIST LATHE MILL Setup / Holding Blocks Parallels Lot Nice Condition

  • San Pedro, California, United States
  • May 15th
C Clamp J. H. WILLIAMS Co. AGRIPPA 8" No 108 Heavy Duty Drop Forged C Clamp, USA

C Clamp J. H. WILLIAMS Co. AGRIPPA 8" No 108 Heavy Duty Drop Forged C Clamp, USA

  • Saunderstown, Rhode Island, United States
  • May 16th
Precision V-Blocks with Clamps - NOS in Box R.C. Hunter Co. Detroit

Precision V-Blocks with Clamps - NOS in Box R.C. Hunter Co. Detroit

  • Sterling Heights, Michigan, United States
  • May 26th
Custom Workholding Fixtures for Dial Indicators Precision Measurement

Custom Workholding Fixtures for Dial Indicators Precision Measurement

  • Story City, Iowa, United States
  • May 26th
Precision V Block 6"x6"x4" 90 Degree Angle Heavy Duty

Precision V Block 6"x6"x4" 90 Degree Angle Heavy Duty

  • Story City, Iowa, United States
  • May 26th
Jacobs Spindle Nose Lathe Chuck L00 mount

Jacobs Spindle Nose Lathe Chuck L00 mount

  • Bangor, Maine, United States
  • May 27th
NEW Sherline 8700 Rotary Table CNC Stepper Motor Controller Indexer

NEW Sherline 8700 Rotary Table CNC Stepper Motor Controller Indexer

  • Edmonds, Washington, United States
  • May 27th
2 INDEXER 5C COLLET CLOSER HANDLES

2 INDEXER 5C COLLET CLOSER HANDLES

  • Chino, California, United States
  • May 27th
Kennametal SS050ER11700 Straight Shank Series ER11 Collet Chuck

Kennametal SS050ER11700 Straight Shank Series ER11 Collet Chuck

  • Spencer, Indiana, United States
  • May 30th
KENNAMETAL SINGLE ANGLE COLLET CHUCK SS175TG100819 TG100 COLLET SERIES 1.75SHANK

KENNAMETAL SINGLE ANGLE COLLET CHUCK SS175TG100819 TG100 COLLET SERIES 1.75SHANK

  • Spencer, Indiana, United States
  • May 30th
ITW FLANGE BODY FOR TORK LOK COLLET CHUCK ARBOR AC-2910 NEW

ITW FLANGE BODY FOR TORK LOK COLLET CHUCK ARBOR AC-2910 NEW

  • Spencer, Indiana, United States
  • May 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies