+ Post new Ad
2 HOLD DOWN ROLLER ASSEMBLIES FOR LEISTER VARIMAT V2 /BAK RION - FREE SHIP, US $95.00 – Picture 0
2 HOLD DOWN ROLLER ASSEMBLIES FOR LEISTER VARIMAT V2 /BAK RION - FREE SHIP, US $95.00 – Picture 0

2 Hold Down Roller Assemblies For Leister Varimat V2 /bak Rion - Free Ship

US $95.00

  • Lakewood, Ohio, United States
  • Aug 10th
Open on mobile:
QR code
YOU WILL RECEIVE A COMPLETE SET (2 ASSEMBLIES AS PICTURED). HOLD DOWN ROLLER ASSEMBLIES  FOR LEISTER VARIMAT, VARIMAT V, VARIMAT V2, & BAK LARON FAST AND EASY INSTALLATION! 1. REMOVE THE C-CLIP AT THE TOP OF SHAFT AND SLIDE ASSEMBLY OUT. 2. SLIDE NEW ASSEMBLY IN. 3. INSTALL NEW C-CLIP. EASY AS 1,2,3! FULLY ASSEMBLED  INCLUDES: IHS 104.262 STAINLESS STEEL C-CLIP  IHS 104.225 STAINLESS STEEL SPRING STAINLESS STEEL YOKE  IHS 107.077 BRASS ROLLER BRASS ROLLER STAINLESS STEEL BOLT STAINLESS STEEL COMPONENTS ENSURE LONGEST LIFE AND RUST FREE PROTECTION --------------- THESE ASSEMBLIES ARE BETTER THAN OEM!   WHY ARE THEY BETTER? 1. WE USE A ONE PIECE STAINLESS STEEL YOKE INSTEAD OF A 2 PIECE YOKE, THEREFORE THERE IS NO SCREW TO COME LOOSE RESULTING IN THE SHAFT SEPERATING FROM THE OEM U-SHAPED BRASS WHEEL HOLDER. IF THE OEM ASSEMBLY IS LOOSE OR DAMAGED, WRINKLING OF THE MEMBRAME AND IRREGULAR WELDS WILL RESULT.  2. OEM U-SHAPED BRASS WHEEL HOLDER IS MADE OF ALUMINUM WHICH OXIDIZES AND IS EASILY DAMAGED WHEN  REMOVING THE ROLL PIN TO REPLACE THE BRASS WHEEL. 3. WE USE A STAINLESS STEEL SHOLDER BOLT TO INSTALL AND REMOVE THE BRASS WHEEL INSTEAD OF A ROLL PIN THAT NEEDS TO BE DRIVEN OUT. WITH OURS, YOU SIMPLY REMOVE THE BOLT AND REPLACE THE BRASS ROLLER. 4. PRICE OF AN OEM COMPLETE SET OF PARTS FOR THIS ASSEMBLY IS NEARLY DOUBLE. 5. YOU RECEIVE ALL THE COMPONENTS INCLUDING  THE SPRINGS. SPRING REPLACEMENT IS MOST CRITICAL AS THEY PROVIDE THE TENSION AND SUPPORT FOR THE AIR DAM BELT (GREEN BELT).    PROUDLY MADE IN THE UNITED STATES  FREE SHIPPING WITHIN AND ONLY TO THE CONTINENTAL UNITED STATES. CHECK OUT OUR OTHER LISTINGS FOR OTHER HIGH QUALITY PARTS AND ACCESSORIES AT LOW PRICES!    
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model FOR VARIMAT & BAK
MPN IHS-100.000
Country/Region of Manufacture United States
Brand IHS
UPC Does not apply

Directions

Similar products from Heat Guns

MASTER APPLIANCE AH-302 Heat Blowers,300F,47.0 cfm

MASTER APPLIANCE AH-302 Heat Blowers,300F,47.0 cfm

  • Minooka, Illinois, United States
  • Aug 12th
MASTER APPLIANCE 51211 Cord

MASTER APPLIANCE 51211 Cord

  • Minooka, Illinois, United States
  • Aug 12th
Steinel HL1502S Double Insulated Multi Speed Corded Hot Air Gun 120/800/1000

Steinel HL1502S Double Insulated Multi Speed Corded Hot Air Gun 120/800/1000

  • Canaan, Indiana, United States
  • Aug 11th
6mm Brass Penny Roller with Ball Bearing Plastic Hot Air Plastic Welder Tool

6mm Brass Penny Roller with Ball Bearing Plastic Hot Air Plastic Welder Tool

  • Shen Zhen, China
  • Aug 11th
Ideal Heat Elite Plus Heat Gun LCD Kit model 46-204

Ideal Heat Elite Plus Heat Gun LCD Kit model 46-204

  • Arlington, Texas, United States
  • Aug 11th
2 LOCK PINS, TRIGGER PINS, LEISTER VARIMAT, VARIMAT V, V2 NEW - FREE SHIP!

2 LOCK PINS, TRIGGER PINS, LEISTER VARIMAT, VARIMAT V, V2 NEW - FREE SHIP!

  • Lakewood, Ohio, United States
  • Aug 11th
Maketa Thermocouple Heat Gun model HG1100

Maketa Thermocouple Heat Gun model HG1100

  • Danville, Indiana, United States
  • Aug 11th
Leister Triac ST - Hot Air Blower Heat Gun Roofing Tool V-Nice used once

Leister Triac ST - Hot Air Blower Heat Gun Roofing Tool V-Nice used once

  • Payson, Arizona, United States
  • Aug 11th
Leister Varimat V2 Hot Air Roofing Welder "Great Shape"

Leister Varimat V2 Hot Air Roofing Welder "Great Shape"

  • Groveport, Ohio, United States
  • Aug 10th
GEO2 Wedge WELDY Mini Welder WELDING MACHINE for Welding Geomemberance 230V

GEO2 Wedge WELDY Mini Welder WELDING MACHINE for Welding Geomemberance 230V

  • Beijing, China
  • Aug 10th
Milwaukee MHT Products Model 750 Heat Gun Tool 50/60Hz 120 VAC 14 Amp. TESTED

Milwaukee MHT Products Model 750 Heat Gun Tool 50/60Hz 120 VAC 14 Amp. TESTED

  • Suffolk, Virginia, United States
  • Aug 10th
Vintage 1980 Master Appliance HG-501 Heavy Duty Heat Gun Plus Docs & Box MINT

Vintage 1980 Master Appliance HG-501 Heavy Duty Heat Gun Plus Docs & Box MINT

  • Utica, Michigan, United States
  • Aug 10th
Professional Hot Air Torch Gun Plastic Welding Gun PVC Europlug Easy Grip

Professional Hot Air Torch Gun Plastic Welding Gun PVC Europlug Easy Grip

  • Shenzhen, China
  • Aug 9th
Professional Hot Air Torch Gun Plastic Welding Gun Europlug 220V 1600W

Professional Hot Air Torch Gun Plastic Welding Gun Europlug 220V 1600W

  • Shenzhen, China
  • Aug 9th
Milwaukee MHT Products Model 750 Heat Gun Tool 50/60Hz 120 VAC 14 Amp. TESTED

Milwaukee MHT Products Model 750 Heat Gun Tool 50/60Hz 120 VAC 14 Amp. TESTED

  • Westminster, Maryland, United States
  • Aug 9th
NEW VINTAGE RED DAYTON 14 AMP 750 DEGREE HEAT GUN

NEW VINTAGE RED DAYTON 14 AMP 750 DEGREE HEAT GUN

  • San Jose, California, United States
  • Aug 9th
GENUINE Master Appliance Heat Gun model HG-301A 12 Amps / Temp 300/500FH Vintage

GENUINE Master Appliance Heat Gun model HG-301A 12 Amps / Temp 300/500FH Vintage

  • Phoenix, Arizona, United States
  • Aug 7th
Milwaukee Dual Heat Gun 1220

Milwaukee Dual Heat Gun 1220

  • Costa Mesa, California, United States
  • Aug 7th
VINTAGE UNGAR 6966 INDUSTRIAL GRADE CORDED HEAT GUN BLOWER, USED - VG

VINTAGE UNGAR 6966 INDUSTRIAL GRADE CORDED HEAT GUN BLOWER, USED - VG

  • Brighton, Colorado, United States
  • Aug 7th
MASTER APPLIANCE PH-1400K Heat Gun Kits,130 to 1000F,4-16 cfm

MASTER APPLIANCE PH-1400K Heat Gun Kits,130 to 1000F,4-16 cfm

  • Minooka, Illinois, United States
  • Aug 7th

People who viewed this item also vieved

GAST 4HCC-66-M400EX Oil-Less Piston Air Compressor 120/230 volt 1/2 hp 100 psig

GAST 4HCC-66-M400EX Oil-Less Piston Air Compressor 120/230 volt 1/2 hp 100 psig

  • Lititz, Pennsylvania, United States
  • Jan 30th
Milwaukee #5343 Rotary Hammer Drill NO RESERVE!!!!!!!!

Milwaukee #5343 Rotary Hammer Drill NO RESERVE!!!!!!!!

  • San Francisco, California, United States
  • Jan 30th
RAMMAX P33 walk behind Compactor

RAMMAX P33 walk behind Compactor

  • Toledo, Ohio, United States
  • Jan 30th
Sycamore Leaf Decorative Concrete Border Accent Art Stamp Tool Mat 9LV08

Sycamore Leaf Decorative Concrete Border Accent Art Stamp Tool Mat 9LV08

  • Laguna Hills, California, United States
  • Jan 30th
Falcon Power Industrial 8500 ES Diesel Welder & Generator

Falcon Power Industrial 8500 ES Diesel Welder & Generator

  • Jenks, Oklahoma, United States
  • Jan 30th
Yanmar L40 L48 L60 L70 L75 L90 L100 1-Pole Oil Pressure Sensor 183250-39450

Yanmar L40 L48 L60 L70 L75 L90 L100 1-Pole Oil Pressure Sensor 183250-39450

  • Farmington, Missouri, United States
  • Jan 30th
Vintage 10"Cincinnati-Hisey Bench Grinder Wheel-Set Shaft Nuts,Washers,7/8,8 tpi

Vintage 10"Cincinnati-Hisey Bench Grinder Wheel-Set Shaft Nuts,Washers,7/8,8 tpi

  • Saint Louisville, Ohio, United States
  • Jan 30th
5 Ton Harrington Electric Chain Hoist & motorized trolley NERM050LD-SD

5 Ton Harrington Electric Chain Hoist & motorized trolley NERM050LD-SD

  • Morristown, Indiana, United States
  • Jan 31st
VINTAGE PAIR USED 2 TIER COMMERCIAL PAINT CONCRETE STUCCO PLASTER MIXERS 24" LNG

VINTAGE PAIR USED 2 TIER COMMERCIAL PAINT CONCRETE STUCCO PLASTER MIXERS 24" LNG

  • Vandalia, Ohio, United States
  • Jan 31st
GREENLEE 1-3209 3" RIGID STEEL SHOE 777 880 885 HYDRAULIC CONDUIT PIPE BENDER

GREENLEE 1-3209 3" RIGID STEEL SHOE 777 880 885 HYDRAULIC CONDUIT PIPE BENDER

  • Walworth, Wisconsin, United States
  • Jan 31st
OMARK POWER LOADS 1000 ROUNDS .25 CALIBER POWDER ACTUATED TOOLS S1 & S3 & S4

OMARK POWER LOADS 1000 ROUNDS .25 CALIBER POWDER ACTUATED TOOLS S1 & S3 & S4

  • Eagle Creek, Oregon, United States
  • Jan 31st
Bennu hydraulic masonary scaffolding

Bennu hydraulic masonary scaffolding

  • Roseburg, Oregon, United States
  • Jan 31st
2 Hilti 14.4 Volt Lith-ion Battery's Used Hold Long Charge

2 Hilti 14.4 Volt Lith-ion Battery's Used Hold Long Charge

  • Exton, Pennsylvania, United States
  • Jan 31st
DeWalt Heavy-Duty 18V 6-Tool Cordless Combo Kit with Nano Technology XRP

DeWalt Heavy-Duty 18V 6-Tool Cordless Combo Kit with Nano Technology XRP

  • Slinger, Wisconsin, United States
  • Jan 31st
master series snap on tool box-black/green

master series snap on tool box-black/green

  • Portage, Indiana, United States
  • Jan 31st
Kohler Automatic Transfer & Isolation Bypass Switch

Kohler Automatic Transfer & Isolation Bypass Switch

  • Conroe, Texas, United States
  • Jan 31st
Original and Brand new Epson Stylus Pro 4910 Chip Resetter for Epson 4910/4900

Original and Brand new Epson Stylus Pro 4910 Chip Resetter for Epson 4910/4900

  • ??, ??, China
  • Jan 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies