+ Post new Ad
2 Machinist V Blocks (No Clamps), US $330 – Picture 0
2 Machinist V Blocks (No Clamps), US $330 – Picture 1
2 Machinist V Blocks (No Clamps), US $330 – Picture 2
2 Machinist V Blocks (No Clamps), US $330 – Picture 3
2 Machinist V Blocks (No Clamps), US $330 – Picture 0
2 Machinist V Blocks (No Clamps), US $330 – Picture 1
2 Machinist V Blocks (No Clamps), US $330 – Picture 2
2 Machinist V Blocks (No Clamps), US $330 – Picture 3

2 Machinist V Blocks (no Clamps)

US $330

  • Wheatland, Pennsylvania, United States
  • Feb 15th
Open on mobile:
QR code
 You are bidding on 2 Machinist V- bocks. They match all over with the exception of the V size which the previous owner machined the V in the right picture larger. The size of the top of the V in the right picture is 1 11/16" across the top with the left one 1 9/16" across the top. Block size's are 2 9/16" long, 2 3/4" wide and 2" high. They are in good condition, only need cleaned up. Thanks for looking, I have other tools  in which I can ship more than one at a cheaper rate, so watch for my other tools. Email me if you have questions.

Directions

Similar products from Supporting Blocks & Sets

Four inch V block

Four inch V block

  • Holly, Michigan, United States
  • Feb 15th
Starrett V Vee Block No. 568 w/ Clamp

Starrett V Vee Block No. 568 w/ Clamp

  • Charlestown, Indiana, United States
  • Feb 15th
Magnetic Transfer Blocks for Surface Grinder

Magnetic Transfer Blocks for Surface Grinder

  • Lititz, Pennsylvania, United States
  • Feb 15th
NEW PAIR V BLOCKS / CLAMPS STARRETT 278 machinist tool tools grinding milling

NEW PAIR V BLOCKS / CLAMPS STARRETT 278 machinist tool tools grinding milling

  • British Columbia, Canada
  • Feb 15th
MACHINE SHOP MADE V BLOCK & CLAMP SET PRECISION

MACHINE SHOP MADE V BLOCK & CLAMP SET PRECISION

  • Macomb, Michigan, United States
  • Feb 15th
Fisher Machine Magnetic Chuck Parallels - One Pair Integrally Cast

Fisher Machine Magnetic Chuck Parallels - One Pair Integrally Cast

  • Charlestown, Indiana, United States
  • Feb 15th
2-1/2" V Bubble Level for Machining Work. Free USA Shipping!

2-1/2" V Bubble Level for Machining Work. Free USA Shipping!

  • Darien Center, New York, United States
  • Feb 15th
Machinist 1-2-3 Blocks And Parallels (One Set Of Each Matching Size's)

Machinist 1-2-3 Blocks And Parallels (One Set Of Each Matching Size's)

  • Wheatland, Pennsylvania, United States
  • Feb 15th
Lot of Enco Triangular Machinists Blocks 3568-41

Lot of Enco Triangular Machinists Blocks 3568-41

  • Hillsdale, New Jersey, United States
  • Feb 15th
Estate Vintage Machinist Vintage Brown & Sharpe No. 749 V Block and Clamp

Estate Vintage Machinist Vintage Brown & Sharpe No. 749 V Block and Clamp

  • Woonsocket, Rhode Island, United States
  • Feb 15th
SET OF 6" PRECISION PARALLELS 5/8"- 1-5/8" X 1/8" W/ CASE

SET OF 6" PRECISION PARALLELS 5/8"- 1-5/8" X 1/8" W/ CASE

  • Ellington, New York, United States
  • Feb 15th
NICE PAIR! TIN COATED 1 2 3 BLOCKS 123 TAPPED HOLES

NICE PAIR! TIN COATED 1 2 3 BLOCKS 123 TAPPED HOLES

  • Ellington, New York, United States
  • Feb 15th
Matched Pair of Small Commercially Made in U.S.A. "V" Blocks with Clamps

Matched Pair of Small Commercially Made in U.S.A. "V" Blocks with Clamps

  • Cape Coral, Florida, United States
  • Feb 14th
Small V Block

Small V Block

  • Bronson, Florida, United States
  • Feb 14th
VFF PRECISION BLOCK AND CLAMP SET / 2 1/2" X 2 1/2" X 2"

VFF PRECISION BLOCK AND CLAMP SET / 2 1/2" X 2 1/2" X 2"

  • Anaheim, California, United States
  • Feb 14th
V-Block Set (2) plus Angle Plate and Pipe Reamer Lot

V-Block Set (2) plus Angle Plate and Pipe Reamer Lot

  • La Habra, California, United States
  • Feb 14th
Precision Parallel Set 637-7030 1/8" x 1/2" - 1-5/8" x 6" Matched Pair Import

Precision Parallel Set 637-7030 1/8" x 1/2" - 1-5/8" x 6" Matched Pair Import

  • Houston, Texas, United States
  • Feb 14th
General V Blocks With Clamps

General V Blocks With Clamps

  • United States
  • Feb 14th
MACHINIST LATHE MILL Machinist Lot of Chuck Center Cutters Parts Etc

MACHINIST LATHE MILL Machinist Lot of Chuck Center Cutters Parts Etc

  • Morris Plains, New Jersey, United States
  • Feb 14th
Pair of Brown & and Sharpe 750B No 51 Machinist V Blocks

Pair of Brown & and Sharpe 750B No 51 Machinist V Blocks

  • Punta Gorda, Florida, United States
  • Feb 14th

People who viewed this item also vieved

JACOBS RUBBER FLEX LATHE COLLET SET 1/16-5/8

JACOBS RUBBER FLEX LATHE COLLET SET 1/16-5/8

  • United States
  • Mar 25th
SANDVIK TAP DRIVER COLLET 36207-17.78.700

SANDVIK TAP DRIVER COLLET 36207-17.78.700

  • Wadley, Alabama, United States
  • Mar 25th
LOT OF 12 ACURA FLEX COLLETS 3/4" TO 1"

LOT OF 12 ACURA FLEX COLLETS 3/4" TO 1"

  • Ellington, New York, United States
  • Mar 25th
Kreg 30" Aluminum Workshop Jig and Miter Fixture Mounting Bar - Part # KMS7303

Kreg 30" Aluminum Workshop Jig and Miter Fixture Mounting Bar - Part # KMS7303

  • Summerville, South Carolina, United States
  • May 7th
SWIVEL MACHINE VISE BASE FOR MILL OR VMC 6-3/8" CENTER TO CENTER

SWIVEL MACHINE VISE BASE FOR MILL OR VMC 6-3/8" CENTER TO CENTER

  • Covina, California, United States
  • May 8th
Hardinge C26 7

Hardinge C26 7" T-slot Face Plate with Taper mount- show original title

  • Rochester, New York, United States
  • May 9th
Samsons Grip 408 Machinist "C" Clamps Pair of 8" Opening Forged Steel USA!

Samsons Grip 408 Machinist "C" Clamps Pair of 8" Opening Forged Steel USA!

  • Jamestown, New York, United States
  • May 14th
TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.78 LBS.

TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.78 LBS.

  • Portland, Oregon, United States
  • May 15th
TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.52 LBS.

TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.52 LBS.

  • Portland, Oregon, United States
  • May 15th
Kitagawa B208 8" CNC Lathe Chuck

Kitagawa B208 8" CNC Lathe Chuck

  • Chatsworth, California, United States
  • May 27th
GOOD USED 1/4" SQ ENGINE LATHE CHUCK KEY 6" T Handle ATLAS BUCK CRAFTSMAN UNION

GOOD USED 1/4" SQ ENGINE LATHE CHUCK KEY 6" T Handle ATLAS BUCK CRAFTSMAN UNION

  • Rushville, Indiana, United States
  • May 27th
Jacobs Spindle Nose Lathe Chuck D1-4 Mount (Inv.33322)

Jacobs Spindle Nose Lathe Chuck D1-4 Mount (Inv.33322)

  • Portland, Connecticut, United States
  • May 28th
Bridgeport Milling Vise With Jaws (Inv.33314)

Bridgeport Milling Vise With Jaws (Inv.33314)

  • Portland, Connecticut, United States
  • May 28th
WILTON MACHINIST BULLET VISE WITH SWIVEL BASE

WILTON MACHINIST BULLET VISE WITH SWIVEL BASE

  • United States
  • May 29th
ALUM VISE JAWS (6” KURT VISE) 6x3/4x1 3/4 (1 SET)

ALUM VISE JAWS (6” KURT VISE) 6x3/4x1 3/4 (1 SET)

  • Gilbertsville, Pennsylvania, United States
  • May 29th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

  • Duncan, South Carolina, United States
  • May 24th
SKODA Precision Heavy Duty Live Center - TAPER: 1 MT

SKODA Precision Heavy Duty Live Center - TAPER: 1 MT

  • Duncan, South Carolina, United States
  • May 24th
Tail Stock Tool & Cutter Cylindrical Grinder Table Center Adjustable Holder

Tail Stock Tool & Cutter Cylindrical Grinder Table Center Adjustable Holder

  • Waldo, Wisconsin, United States
  • May 31st
Kitagawa F1236HN28F Hydraulic Actuator Cylinder-REBUILT-with exchange-Miyano-CNC

Kitagawa F1236HN28F Hydraulic Actuator Cylinder-REBUILT-with exchange-Miyano-CNC

  • Lagrange, Ohio, United States
  • May 31st
10 Wedgelock Clecos Cylindrical Cleco Fastener with 0-1/2" Grip, CBX-BF-5/32

10 Wedgelock Clecos Cylindrical Cleco Fastener with 0-1/2" Grip, CBX-BF-5/32

  • Weatherford, Texas, United States
  • May 31st
4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

  • Diamond Bar, California, United States
  • Jun 4th
Peiseler PT 160 Indexing Table w/ Tailstock, 4 x 90 degree, Mfg'd 1996, Used

Peiseler PT 160 Indexing Table w/ Tailstock, 4 x 90 degree, Mfg'd 1996, Used

  • Grand Rapids, Michigan, United States
  • Jun 4th
Index Indexer For Rotary Machining

Index Indexer For Rotary Machining

  • Archbold, Ohio, United States
  • Jun 4th
ATS 3J Chuck

ATS 3J Chuck

  • Hendersonville, Tennessee, United States
  • Jun 9th
Techniks Cat/ER Collet Chuck, Model #SYIC-22255 N, Cat 40 x ER32-4", New!

Techniks Cat/ER Collet Chuck, Model #SYIC-22255 N, Cat 40 x ER32-4", New!

  • Osawatomie, Kansas, United States
  • Jun 9th
ISO30 ER16 M12 G2.5 30,000rpm precision balance collet chuck holder ISO30 New

ISO30 ER16 M12 G2.5 30,000rpm precision balance collet chuck holder ISO30 New

  • shenzhen, China
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies