+ Post new Ad
2 New Diamond Saw Works Super Sterling Power HackSaw Metal Cutting Saw Blade USA, US $9.99 – Picture 0
2 New Diamond Saw Works Super Sterling Power HackSaw Metal Cutting Saw Blade USA, US $9.99 – Picture 0

2 New Diamond Saw Works Super Sterling Power Hacksaw Metal Cutting Saw Blade Usa

US $9.99

  • Sardinia, New York, United States
  • Feb 15th
Open on mobile:
QR code
We have 2 NOS Diamond Saw Works Sterling Power Hacksaw Metal Cutting Blade. New, never used. Made by the Diamond Saw Works Co located in Chaffee NY. The Blade is 18 5/8" long. 1 1/2" wide. Center of one hole to Center of opposite hole is 17 1/2". Number M-1804-7. More available, we can combine shipping. *****...If you cannot contact us by email for whatever reason call us at 716-496-8241 The high bidder will pay for all shipping costs usually via Priority Mail. We do combine shipping when it is possible. PLEASE REQUEST INSURANCE BEFORE PAYING INVOICE IF YOUR AUCTION DOES NOT STATE SHIPPING INCLUDES INSURANCE. Please note : We only issue refunds if we mistakenly misrepresent the item, then a refund will be issued. We try very hard to satisfy our Buyers. We DO NOT issue a refund for shipping costs!! Unless we send the wrong item to you or in some other way the problem is our fault. We try to respond to all emails with 24 to 48 hours after the auction ends.  Thank you for your patience.   All electronics products are sold " As Is". The description will say if the item is working or not. Electronics can and do become inoperable during shipping. Insurance may or may not cover for this type of damage! Paypal is the preferred method of payment . We will ship your item/items the same or the next day that payment is received in MOST cases! Please provide a valid email address to EBAY. If your email address is not a valid one then EBAY or us cannot provide you with shipping costs. ALL auctions after 10 days of no contact will be issued a Negative feedback. Also check to see that your email address does not block our emails. We cannot send you shipping costs if you are filtering out our emails.If you cannot contact us by email our phone number is 716-496-8241.!!!!!!!! Please check out our other auctions for more great deals like this one ! New York State Residents....We MUST charge 8.75% Sales Tax on all items sold in NYS. Please provide a VALID Tax Exempt number.     Auctions by n2lbv Check out our other eBay auctions Auction Wizard 2000 - The Complete Auction Management Software Solution

Directions

Similar products from Saws & Sawblades

Nicholson Hardback Band Saw Coil 1/2" x .025 12 Raker 66482

Nicholson Hardback Band Saw Coil 1/2" x .025 12 Raker 66482

  • Sears, Michigan, United States
  • Feb 15th
Nicholson Hardback Band Saw Coil 3/8" x .025 24 Raker 66342

Nicholson Hardback Band Saw Coil 3/8" x .025 24 Raker 66342

  • Sears, Michigan, United States
  • Feb 15th
NOS Milford High Speed Steel Hole Saw 7/8" 22mm No 44784

NOS Milford High Speed Steel Hole Saw 7/8" 22mm No 44784

  • Belfast, Maine, United States
  • Feb 15th
OSHLUN SBW-100040 10" X 40 TEETH WOOD CUTTING SAW BLADE W/ ARBOR 5/8"

OSHLUN SBW-100040 10" X 40 TEETH WOOD CUTTING SAW BLADE W/ ARBOR 5/8"

  • Rifle, Colorado, United States
  • Feb 15th
BAND SAW HEAD CUTTER, CIRCULAR, PNEUMATIC SPINDLE, JONES EMPEROR SUPERIOR MDL. 5

BAND SAW HEAD CUTTER, CIRCULAR, PNEUMATIC SPINDLE, JONES EMPEROR SUPERIOR MDL. 5

  • Plano, Texas, United States
  • Feb 15th
Kennametal - 1247785 - Indexable Slotting Cutter - 6.22mm (.25in.) Cut Width

Kennametal - 1247785 - Indexable Slotting Cutter - 6.22mm (.25in.) Cut Width

  • Petal, Mississippi, United States
  • Feb 15th
Lenox bandsaw blades

Lenox bandsaw blades

  • Horn Lake, Mississippi, United States
  • Feb 15th
KENNAMETAL KS46BLNE124S NARROW SLOT CUTTER (.375 inch Width Cut)

KENNAMETAL KS46BLNE124S NARROW SLOT CUTTER (.375 inch Width Cut)

  • Petal, Mississippi, United States
  • Feb 15th
GB mini cut power tip 16" chain saw blade

GB mini cut power tip 16" chain saw blade

  • Oxford, Connecticut, United States
  • Feb 15th
Capewell Technite Hacksaw Blade N.O.S.

Capewell Technite Hacksaw Blade N.O.S.

  • Vineland, New Jersey, United States
  • Feb 15th
Lenox 1L 1779774 Hole Saw Arbor Mandrel Fits 9/16" - 1-3/16" 1/2" Hex Shank

Lenox 1L 1779774 Hole Saw Arbor Mandrel Fits 9/16" - 1-3/16" 1/2" Hex Shank

  • Meriden, Kansas, United States
  • Feb 15th
Dixie Diamond Mfg. TP4 Turbo Dry/Wet 4" Cutting Blade, Premium 4" X .080" X 7/8"

Dixie Diamond Mfg. TP4 Turbo Dry/Wet 4" Cutting Blade, Premium 4" X .080" X 7/8"

  • Denver, Colorado, United States
  • Feb 15th
NEW CRYOTOOL CRYOFLEX CT TUNGSTEN CARBIDE 80 TOOTH 14" CHOP SAW BLADE 803-7-1480

NEW CRYOTOOL CRYOFLEX CT TUNGSTEN CARBIDE 80 TOOTH 14" CHOP SAW BLADE 803-7-1480

  • Watertown, New York, United States
  • Feb 15th
APT Air Panel Saw Pneumatic Boeing Aircraft Tool 1000D1 Circular

APT Air Panel Saw Pneumatic Boeing Aircraft Tool 1000D1 Circular

  • Friendsville, Tennessee, United States
  • Feb 15th
Nicholson Hardback Band Saw Coil 3/8" x .025 10 Raker 66302

Nicholson Hardback Band Saw Coil 3/8" x .025 10 Raker 66302

  • Sears, Michigan, United States
  • Feb 14th
18" COLD CUT SAW BLADE

18" COLD CUT SAW BLADE

  • Franklin Park, Illinois, United States
  • Feb 14th
Olson Welded Band Saw Blade (141") 11' 9" x 1" x .028 4 TPI 48-5042

Olson Welded Band Saw Blade (141") 11' 9" x 1" x .028 4 TPI 48-5042

  • Sears, Michigan, United States
  • Feb 14th
Olson Welded Band Saw Blade (141") 11' 9" x 1/2" x .028 5 TPI

Olson Welded Band Saw Blade (141") 11' 9" x 1/2" x .028 5 TPI

  • Sears, Michigan, United States
  • Feb 14th
HYD-Mech P250 Metal Cutting Cold Saw with Stand Manual Pivot Arm 230V 3 Phase

HYD-Mech P250 Metal Cutting Cold Saw with Stand Manual Pivot Arm 230V 3 Phase

  • Frederick, Maryland, United States
  • Feb 14th
NICE LOT 11 HSS SLITTING & SLOTTING BLADES 2-3/4" TO 3" WITH 1" BORE & ARBOR

NICE LOT 11 HSS SLITTING & SLOTTING BLADES 2-3/4" TO 3" WITH 1" BORE & ARBOR

  • Ellington, New York, United States
  • Feb 14th

People who viewed this item also vieved

KENNAMETAL CARBIDE INSERTS , CNMG 432FF, KT315 , 6 INSERTS

KENNAMETAL CARBIDE INSERTS , CNMG 432FF, KT315 , 6 INSERTS

  • Berlin, Connecticut, United States
  • Jan 30th
ISCAR 6003640 TAG L2C-6D IC808 CUTOFF INSERT

ISCAR 6003640 TAG L2C-6D IC808 CUTOFF INSERT

  • New Port Richey, Florida, United States
  • Jan 30th
Garr 1/2 in carbide endmill

Garr 1/2 in carbide endmill

  • Eau Claire, Wisconsin, United States
  • Jan 30th
NIAGARA END MILLS ~ 1/2 HSS 20162 ~ LOT OF 5

NIAGARA END MILLS ~ 1/2 HSS 20162 ~ LOT OF 5

  • San Dimas, California, United States
  • Jan 30th
(5) ACCUPRO, Solid Carbide Groove Tools, 0.0385" W, 5/16" shank - USED!!!

(5) ACCUPRO, Solid Carbide Groove Tools, 0.0385" W, 5/16" shank - USED!!!

  • Sarasota, Florida, United States
  • Jan 30th
(5) ACCUPRO, Solid Carbide Groove Tools, 0.0335" W, 5/16" shank - USED!!!

(5) ACCUPRO, Solid Carbide Groove Tools, 0.0335" W, 5/16" shank - USED!!!

  • Sarasota, Florida, United States
  • Jan 30th
Vtg Lot Machinists Center Pin Punches Hammer Level Files Tuck Stanley Starrett

Vtg Lot Machinists Center Pin Punches Hammer Level Files Tuck Stanley Starrett

  • Mansfield Center, Connecticut, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Danly Danley Era Die Press Punch Press j

MACHINIST TOOLS LATHE MILL Danly Danley Era Die Press Punch Press j

  • Morris Plains, New Jersey, United States
  • Jan 30th
KEYSTONE ADJUSTABLE REAMER 1-11/32"- 1-17/32" USED

KEYSTONE ADJUSTABLE REAMER 1-11/32"- 1-17/32" USED

  • Ely, Minnesota, United States
  • Jan 30th
Critchley Adjustable Reamer Size P - 3 11/32” - 4” Angle Blade 6 Flute

Critchley Adjustable Reamer Size P - 3 11/32” - 4” Angle Blade 6 Flute

  • Milton Freewater, Oregon, United States
  • Jan 30th
VALENITE CERAMIC INSERT RNG 45 Q32 QTY 10 (LOC1301A)

VALENITE CERAMIC INSERT RNG 45 Q32 QTY 10 (LOC1301A)

  • Laingsburg, Michigan, United States
  • Feb 14th
VALENITE CERAMIC INSERT DNGA 432T 00820A Q35 QTY 7 (LOC1301A)

VALENITE CERAMIC INSERT DNGA 432T 00820A Q35 QTY 7 (LOC1301A)

  • Laingsburg, Michigan, United States
  • Feb 14th
1/4 X 1/4 X 6" HSS - 5% Cobalt Lathe Tooling

1/4 X 1/4 X 6" HSS - 5% Cobalt Lathe Tooling

  • Bardstown, Kentucky, United States
  • Feb 26th
65 lathe bits

65 lathe bits

  • Upper Darby, Pennsylvania, United States
  • Feb 26th
THE DUMONT CO. NUMBER 10 STANDARD BROACH SET 1104 STD

THE DUMONT CO. NUMBER 10 STANDARD BROACH SET 1104 STD

  • Coffeyville, Kansas, United States
  • Mar 28th
NEW HOUGEN 12232 12 000 SERIES 1 IN X 2 IN ROTABROACH CUTTER TOOL B493636

NEW HOUGEN 12232 12 000 SERIES 1 IN X 2 IN ROTABROACH CUTTER TOOL B493636

  • Buffalo, New York, United States
  • Mar 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies