+ Post new Ad
2 -- SGS - 30307 - 1/16 Solid Carbide Square End Mill, US $10.70 – Picture 0
2 -- SGS - 30307 - 1/16 Solid Carbide Square End Mill, US $10.70 – Picture 1
2 -- SGS - 30307 - 1/16 Solid Carbide Square End Mill, US $10.70 – Picture 0
2 -- SGS - 30307 - 1/16 Solid Carbide Square End Mill, US $10.70 – Picture 1

2 -- Sgs - 30307 - 1/16 Solid Carbide Square End Mill

US $10.70

  • Colorado Springs, Colorado, United States
  • Jan 30th
Open on mobile:
QR code
 2 - Square End Mills; Mill Diameter (mm): 1.59; Mill Diameter (Inch): 1/16; Mill Diameter (Decimal Inch): 0.0625; Number of Flutes: 2; Material: Solid Carbide; Length of Cut (mm): 4.76 Mill Diameter (mm) 1.59 Mill Diameter (Inch) 1/16 Mill Diameter (Decimal Inch) 0.0625 Number of Flutes 2 Material Solid Carbide Length of Cut (mm) 4.76 Length of Cut (Inch) 3/16 Length of Cut (Decimal Inch) 0.1875 Finish/Coating Uncoated Overall Length (Inch) 1-1/2 Overall Length (Decimal Inch) 1.5000 Single or Double End Single Shank Diameter (mm) 3.18 Shank Diameter (Inch) 1/8 Shank Diameter (Decimal Inch) 0.1250 Flute Type Spiral Helix Angle ( ) 30.00 Flute Direction Right Hand Centercutting (Yes/No) Yes Cutting Direction Right Hand
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material Carbide
Flutes 2-Flute
Coating None
Helix Angle 30° Helix
End Type Single End
Cutting Diameter 1/16in.
Brand SGS
Shank Diameter 1/8in.
Model 30307
Quantity 2

Directions

Similar products from End Mills Router & Drill Bits

TORMACH - MCLNR 12-4C CLAMP STYLE TURNING HOLDER 3/4" SHANK

TORMACH - MCLNR 12-4C CLAMP STYLE TURNING HOLDER 3/4" SHANK

  • Athens, West Virginia, United States
  • Jan 30th
7/16" 3 Flute 1"LOC Benchmark HP ZRN Carbide End Mill F/Aluminum #350-43716-C5

7/16" 3 Flute 1"LOC Benchmark HP ZRN Carbide End Mill F/Aluminum #350-43716-C5

  • Seminole, Florida, United States
  • Jan 30th
NICE ASSORTED LOT OF 4 PRECISION MICROMETER HEADS .001 AND .0001 L.S.STARRETT

NICE ASSORTED LOT OF 4 PRECISION MICROMETER HEADS .001 AND .0001 L.S.STARRETT

  • Ellington, New York, United States
  • Jan 30th
NICE LOT OF 3 HSS HEAVY DUTY DOVETAIL MILLING CUTTERS 60 DEGREE WELDON

NICE LOT OF 3 HSS HEAVY DUTY DOVETAIL MILLING CUTTERS 60 DEGREE WELDON

  • Ellington, New York, United States
  • Jan 30th
NICE LOT OF 5 HSS STAGGERED TOOTH KEYSEAT CUTTERS 1" TO 1-1/2" WELDON

NICE LOT OF 5 HSS STAGGERED TOOTH KEYSEAT CUTTERS 1" TO 1-1/2" WELDON

  • Ellington, New York, United States
  • Jan 30th
4 5/8 LONG RED CUT COBALT HIGH SPEED STEEL BIT NEW

4 5/8 LONG RED CUT COBALT HIGH SPEED STEEL BIT NEW

  • Roscoe, Illinois, United States
  • Jan 30th
OSG 18MM END MILL SC 2 FLUTE SE CC 402- 7087 13114

OSG 18MM END MILL SC 2 FLUTE SE CC 402- 7087 13114

  • Austin, Indiana, United States
  • Jan 30th
OSG 20MM END MILL SC 2 FLUTE SE CC 402- 7874 18314

OSG 20MM END MILL SC 2 FLUTE SE CC 402- 7874 18314

  • Austin, Indiana, United States
  • Jan 30th
Cobalt end mill "new"

Cobalt end mill "new"

  • Ontario, California, United States
  • Jan 30th
"new" 7/8 M42 Cobalt end mill "new"

"new" 7/8 M42 Cobalt end mill "new"

  • Ontario, California, United States
  • Jan 30th
LOT OF 12 SINGLE AND DOUBLE ENDED END MILLS 5/8" TO 1-1/4" WELDON

LOT OF 12 SINGLE AND DOUBLE ENDED END MILLS 5/8" TO 1-1/4" WELDON

  • Ellington, New York, United States
  • Jan 30th
Nachi 7/8 x 7/8 x 5 1/2 oal two flute double end end mill "BRAND NEW"

Nachi 7/8 x 7/8 x 5 1/2 oal two flute double end end mill "BRAND NEW"

  • Alvin, Texas, United States
  • Jan 30th
Nachi 1" two flute double end end mill "BRAND NEW"

Nachi 1" two flute double end end mill "BRAND NEW"

  • Alvin, Texas, United States
  • Jan 30th
1MM X 50MM, 2-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x

1MM X 50MM, 2-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x

  • --, Hong Kong
  • Jan 30th
Putnam end mills 3/4 x 4" length of cut 6 1/4 oal two flute end mill

Putnam end mills 3/4 x 4" length of cut 6 1/4 oal two flute end mill

  • Alvin, Texas, United States
  • Jan 30th
Hanita 6 flute 1 1/4 x 1 1/4 x 2" x 4 1/2 6 flute end mill "BRAND NEW"

Hanita 6 flute 1 1/4 x 1 1/4 x 2" x 4 1/2 6 flute end mill "BRAND NEW"

  • Alvin, Texas, United States
  • Jan 30th
Cleveland Twist Drill Endmill Assortment

Cleveland Twist Drill Endmill Assortment

  • Bay Village, Ohio, United States
  • Jan 30th
3/16 1/8 AND 3/8 COLBALT T-CENTER AND DOUBLE END MILL 4 FLUTE MADE IN THE USA

3/16 1/8 AND 3/8 COLBALT T-CENTER AND DOUBLE END MILL 4 FLUTE MADE IN THE USA

  • Bethlehem, Pennsylvania, United States
  • Jan 30th
LOT OF 14 FRESHLY SHARPENED DOUBLE END END MILLS 5/32" TO 5/16" WITH 3/8" SHANK

LOT OF 14 FRESHLY SHARPENED DOUBLE END END MILLS 5/32" TO 5/16" WITH 3/8" SHANK

  • Ellington, New York, United States
  • Jan 30th
3/4 finisher 4FL ball nose

3/4 finisher 4FL ball nose

  • Lenexa, Kansas, United States
  • Jan 30th

People who viewed this item also vieved

10 NEW SUMITOMO SEKN 43MT CERMET INSERTS. GRADE: T250A (F513)

10 NEW SUMITOMO SEKN 43MT CERMET INSERTS. GRADE: T250A (F513)

  • Mentor, Ohio, United States
  • Feb 13th
4 NEW SUMITOMO SPMT 09 T308 CARBIDE INSERTS. GRADE: ACZ310 (F521)

4 NEW SUMITOMO SPMT 09 T308 CARBIDE INSERTS. GRADE: ACZ310 (F521)

  • Mentor, Ohio, United States
  • Feb 13th
1/2-13 Vermont American Threadit 1 inch external threading dies new round 6 pcs

1/2-13 Vermont American Threadit 1 inch external threading dies new round 6 pcs

  • North Brunswick, New Jersey, United States
  • Feb 13th
6-32 Vermont American1 inch external threading die new round 3pcs

6-32 Vermont American1 inch external threading die new round 3pcs

  • North Brunswick, New Jersey, United States
  • Feb 13th
Dihart Cylindrical Shank Rapid Set Arbor - Reamer

Dihart Cylindrical Shank Rapid Set Arbor - Reamer

  • Otsego, Michigan, United States
  • Feb 26th
API Reamer 0.7677 v 9 1/2" CNC LATHE MILL NEW

API Reamer 0.7677 v 9 1/2" CNC LATHE MILL NEW

  • Dover, Florida, United States
  • Feb 26th
Landis Head Tangential Dies - 4' x 1" - 7 tpi - Throat Long - SKU1333

Landis Head Tangential Dies - 4' x 1" - 7 tpi - Throat Long - SKU1333

  • Port Sydney, ON, Canada
  • Mar 5th
3 Mate Punch Die Sets Square .850 .875 .782

3 Mate Punch Die Sets Square .850 .875 .782

  • Henderson, Nevada, United States
  • Mar 5th
MILWAUKEE 48-00-5713 9"10TPI 5 SAW BLADES (AA2091-2)

MILWAUKEE 48-00-5713 9"10TPI 5 SAW BLADES (AA2091-2)

  • Corona, California, United States
  • Mar 29th
25 (Twenty Five) 10" x 60 Tooth Carbide Tipped Chop Saw Blades... Pro Grade ....

25 (Twenty Five) 10" x 60 Tooth Carbide Tipped Chop Saw Blades... Pro Grade ....

  • Hixson, Tennessee, United States
  • Mar 29th
Kyocera TNGG 321-LC TC30 Ceramic Inserts **10 Inserts**

Kyocera TNGG 321-LC TC30 Ceramic Inserts **10 Inserts**

  • Houston, Texas, United States
  • Jun 29th
7 new KENNAMETAL CNGA 643T 0820 K090 Ceramic Inserts CNGA190612T02020 KY1615

7 new KENNAMETAL CNGA 643T 0820 K090 Ceramic Inserts CNGA190612T02020 KY1615

  • Champlain, New York, United States
  • Jun 29th
Keyway Broach Bushing 1-5/16" Dia. 3/8" slot .559 Deep 2" OAL

Keyway Broach Bushing 1-5/16" Dia. 3/8" slot .559 Deep 2" OAL

  • Milton Freewater, Oregon, United States
  • May 28th
Keyway Broach Bushing 1-1/2" Dia. 3/8" slot .555 Deep 2-1/2" OAL

Keyway Broach Bushing 1-1/2" Dia. 3/8" slot .555 Deep 2-1/2" OAL

  • Milton Freewater, Oregon, United States
  • May 28th
MOS SMO Router CNC Engraving V Groove Sharpen Bit 6mmx22mm(JZD622)

MOS SMO Router CNC Engraving V Groove Sharpen Bit 6mmx22mm(JZD622)

  • USA, United States
  • May 29th
Kodiak Cutting Tools 4N-2G46-3C1B USA Made Carbide Bur Set on 1/4" Shanks, 1/2"

Kodiak Cutting Tools 4N-2G46-3C1B USA Made Carbide Bur Set on 1/4" Shanks, 1/2"

  • USA, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies