+ Post new Ad
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 0
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 1
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 2
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 3
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 4
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 0
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 1
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 2
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 3
2001 Hardinge 1000 II CNC Turning Center, US $22,000.00 – Picture 4

2001 Hardinge 1000 Ii Cnc Turning Center

US $22,000.00

  • Chicago, Illinois, United States
  • Mar 9th
Open on mobile:
QR code
Specifications Travels X-Axis Longitudinal 40.16? Y-Axis Cross 20.08? Z-Axis Vertical 20.08? Spindle Nose to Table Surface 6.1? to 26.1? Table Front Edge to Door 7.23? Spindle Center to Column 23? Table Length 44? Width 20? Weight on Table (Max) 1,540 lbs. T-Slot Size (Width X No. X Pitch) .708? X 3 X 6.3? Floor to Table Surface Distance 33.46? Spindle Spindle Taper Size BT 40 Spindle Motor Rating (Max) 17.3 HP/13-KW Standard Spindle Speed (MAX) – 8,000 RPM Standard Spindle Torque (MAX @ 2000 RPM)68.1 FT-LB Transmission Direct Belt Drive Taper Cleaning Air Blast Spindle Orientation Non Contact Magnetic Encoder Draw Bar Actuation Pneumatic Tool Holder Clamping Method Disc Springs Tool Clampin Force 1,760 lbs. Slides Way Construction (Each Axis) Linear Guides Way Size (Each Axis) #30 Number of Slides X & Y Axis 3 Z Axis 2 Ball Screws Diameter (Each Axis) 1.26? Pitch (Each Axis) .394? Feed Rates Rapid Rates (Each Axis) 1181 IPM Cutting Feed Rate (Max) 472 IPM Jog Feed Rate 1181 IPM Automatic Tool Changer Tool Capacity Standard 20 ATC Type Carousel Selection Method Bidirectional & Shortest Path Shank Type BT-40 Tool Diameter Max 3.5? With Adjacent Pots Empty 6? Tool Length (Max) 9.84? Tool Weight (Max) 13.2 lbs. Tool to Tool Time (Average) 3 seconds Coolant Tank Capacity 39.8 gal Flow Rate 13.1 GPM Chip Flush Flow Rate 30 GPM

Directions

Similar products from Tools for Milling Machines

atlas milling machine table block atlas shaper 7b

atlas milling machine table block atlas shaper 7b

  • Royal Oak, Michigan, United States
  • Mar 9th
LOT HEAVY DUTY HSS MILLING CUTTERS w/ 1/2" ARBOR HOLES

LOT HEAVY DUTY HSS MILLING CUTTERS w/ 1/2" ARBOR HOLES

  • Norwalk, California, United States
  • Mar 9th
Lot of HSS Milling Saw Cutter

Lot of HSS Milling Saw Cutter

  • Covina, California, United States
  • Mar 9th
Deckel fp1/fp2/fp3 40 Taper MT1 Adapter

Deckel fp1/fp2/fp3 40 Taper MT1 Adapter

  • Salinas, California, United States
  • Mar 9th
Four Deckel 6V Lightbulbs for Heidenhain Optics, Circular Table

Four Deckel 6V Lightbulbs for Heidenhain Optics, Circular Table

  • Salinas, California, United States
  • Mar 9th
2 bits upcut spiral and Compression. 1/2" shank( good conditions)

2 bits upcut spiral and Compression. 1/2" shank( good conditions)

  • Bethlehem, Pennsylvania, United States
  • Mar 9th
Milling Machine Accessory - Air Power Drawbar A&T ANT-300 (R8, NT30,40).

Milling Machine Accessory - Air Power Drawbar A&T ANT-300 (R8, NT30,40).

  • Mira Loma, California, United States
  • Mar 9th
3-CHAMFER TOOL K-TOOL A-1383

3-CHAMFER TOOL K-TOOL A-1383

  • Union, New Jersey, United States
  • Mar 9th
Shell Indexable Insert Mill - Radius .75" Dia Round Insert

Shell Indexable Insert Mill - Radius .75" Dia Round Insert

  • Lindenhurst, New York, United States
  • Mar 9th
*Used machine pallet Mazak H400 horizontal machining center hmc 400mm x 40mmm*

*Used machine pallet Mazak H400 horizontal machining center hmc 400mm x 40mmm*

  • Rogers, Minnesota, United States
  • Mar 9th
Milling machine tooling - fly cutters, arbor, high speed tools

Milling machine tooling - fly cutters, arbor, high speed tools

  • Bangor, Maine, United States
  • Mar 9th
Haas TM-2 CNC Vertical Toolroom Mill with Automatic Tool Changer

Haas TM-2 CNC Vertical Toolroom Mill with Automatic Tool Changer

  • Minneapolis, Minnesota, United States
  • Mar 9th
Motor Mounts for fractional HP Motor, Fit Deckel G1L

Motor Mounts for fractional HP Motor, Fit Deckel G1L

  • Salinas, California, United States
  • Mar 8th
Bridgeport Mill Power Feed

Bridgeport Mill Power Feed

  • Romeo, Michigan, United States
  • Mar 8th
Seco Indexable High-Feed Face Mill 4" Cutting Diameter NEW R220.21-4.00-R160.7A

Seco Indexable High-Feed Face Mill 4" Cutting Diameter NEW R220.21-4.00-R160.7A

  • Eastlake, Ohio, United States
  • Mar 8th
Bridgeport series 1, 2J head casting

Bridgeport series 1, 2J head casting

  • Phoenix, Arizona, United States
  • Mar 8th
# 40 TAPER 1" MILLING MACHINE ARBOR

# 40 TAPER 1" MILLING MACHINE ARBOR

  • Tallmadge, Ohio, United States
  • Mar 8th
Cncfusion Mini Mill x2 Cnc conversion set

Cncfusion Mini Mill x2 Cnc conversion set

  • karsiyaka, izmir, Turkey
  • Mar 8th
Sumitomo WFM 405R 5" Mill mounted on Kennemetal CV40SM150241 Cat 40 Holder

Sumitomo WFM 405R 5" Mill mounted on Kennemetal CV40SM150241 Cat 40 Holder

  • Portage, Michigan, United States
  • Mar 8th
TOOLING SYSTEMS IS040 EM3/16X2.312E TOOL HOLDER END MILL STEEL 3/16 IN B228424

TOOLING SYSTEMS IS040 EM3/16X2.312E TOOL HOLDER END MILL STEEL 3/16 IN B228424

  • Buffalo, New York, United States
  • Mar 8th

People who viewed this item also vieved

BROWN & SHARPE 1-1/8" #22C SERRATED ROUND COLLET. 12291423

BROWN & SHARPE 1-1/8" #22C SERRATED ROUND COLLET. 12291423

  • Fox Lake, Illinois, United States
  • Jan 30th
HARDINGE 7/8" #22C SQUARE COLLET. 12291422

HARDINGE 7/8" #22C SQUARE COLLET. 12291422

  • Fox Lake, Illinois, United States
  • Jan 30th
HARDINGE 1-1/8" #22C HEX COLLET. 12291421

HARDINGE 1-1/8" #22C HEX COLLET. 12291421

  • Fox Lake, Illinois, United States
  • Jan 30th
HeliCoil M6x1 Prewinder #7751-6 - Threaded Insert Installation Tool

HeliCoil M6x1 Prewinder #7751-6 - Threaded Insert Installation Tool

  • Avon, Indiana, United States
  • Jan 30th
NEW E-Z LOK 329-4 1/4-20X7/16/14 THREAD INSERT D432211

NEW E-Z LOK 329-4 1/4-20X7/16/14 THREAD INSERT D432211

  • Delta, Ohio, United States
  • Jan 30th
6-32 X .138" Long Stainless Threaded Insert, 3585-06CNW138

6-32 X .138" Long Stainless Threaded Insert, 3585-06CNW138

  • Abingdon, Maryland, United States
  • Jan 30th
System 3R Service Rebuild Mini Kits #SS-P085 (3kits)

System 3R Service Rebuild Mini Kits #SS-P085 (3kits)

  • Brookfield, Wisconsin, United States
  • Jan 30th
Nice EDM Electrode holder for small graphite Electrodes

Nice EDM Electrode holder for small graphite Electrodes

  • Check, Virginia, United States
  • Jan 30th
Charmilles EDM Holders-Square Block- Indicator holder spinner-Electrode mount

Charmilles EDM Holders-Square Block- Indicator holder spinner-Electrode mount

  • Cedar Grove, Wisconsin, United States
  • Jan 30th
Blue Point Metal Cutting Shears (2) Straight & Right Cuts

Blue Point Metal Cutting Shears (2) Straight & Right Cuts

  • Newnan, Georgia, United States
  • Jan 30th
Milwaukee Catalog No. 49-57-0030 Steel Hawg Arbor Assembly and 1-7/8" Bit

Milwaukee Catalog No. 49-57-0030 Steel Hawg Arbor Assembly and 1-7/8" Bit

  • New Lebanon, Ohio, United States
  • Jan 30th
L.S.Starrett Co. --Decimal Equivalent Chart--Vintage Original

L.S.Starrett Co. --Decimal Equivalent Chart--Vintage Original

  • Garfield, New Jersey, United States
  • Jan 30th
NORTON 5" X 15" CYLINDRICAL GRINDER W/SWINGALING TAPER CONTROLLER (OC312)

NORTON 5" X 15" CYLINDRICAL GRINDER W/SWINGALING TAPER CONTROLLER (OC312)

  • Huntington Beach, California, United States
  • Jan 30th
USED MAGERLE 12" X 48' AUTOMATIC SURFACE GRINDER SWISS MADE (OC309)

USED MAGERLE 12" X 48' AUTOMATIC SURFACE GRINDER SWISS MADE (OC309)

  • Huntington Beach, California, United States
  • Jan 30th
Sunnen - K5-A79 Stone - 15 Stones in Box - New Old Stock - K5-A 79

Sunnen - K5-A79 Stone - 15 Stones in Box - New Old Stock - K5-A 79

  • Lockport, Illinois, United States
  • Jan 30th
Contact Wheel & Flat Platen “D-D Work Rest” for KMG and G2 Knife Belt Grinder

Contact Wheel & Flat Platen “D-D Work Rest” for KMG and G2 Knife Belt Grinder

  • North Bend, Washington, United States
  • Jan 30th
Contact Wheel and Flat Platen “D-D Work Rest” for JL Knife Maker Belt Grinders

Contact Wheel and Flat Platen “D-D Work Rest” for JL Knife Maker Belt Grinders

  • North Bend, Washington, United States
  • Jan 30th
Small Wheel “D-D Work Rest” for KMG Knife Maker Belt Grinder Small Wheel Holder

Small Wheel “D-D Work Rest” for KMG Knife Maker Belt Grinder Small Wheel Holder

  • North Bend, Washington, United States
  • Jan 30th
Jacobs drill chuck 1/8 - 3/4 super ball bearing # 4 morse taper

Jacobs drill chuck 1/8 - 3/4 super ball bearing # 4 morse taper

  • Seattle, Washington, United States
  • Jan 30th
PRECISION HARDINGE CATARACT TYPE HEADSTOCK OFFSET CHUCK MANUAL INDEXING WATCH

PRECISION HARDINGE CATARACT TYPE HEADSTOCK OFFSET CHUCK MANUAL INDEXING WATCH

  • Coloma, Wisconsin, United States
  • Jan 30th
NEW ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE CHUCK KEY 1/4 SQUARE END NEW

NEW ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE CHUCK KEY 1/4 SQUARE END NEW

  • Niles, Michigan, United States
  • Jan 30th
Malco Replacement Cutting Wheel for Malco TC127 - RW127

Malco Replacement Cutting Wheel for Malco TC127 - RW127

  • San Diego, California, United States
  • Jan 30th
PALMGREN - Cast iron tool stand - Model # 70101

PALMGREN - Cast iron tool stand - Model # 70101

  • Flushing, New York, United States
  • Jan 30th
JET SS-12T SLITTER SHEAR WITH HANDLE

JET SS-12T SLITTER SHEAR WITH HANDLE

  • Santa Paula, California, United States
  • Jan 30th
Hyd-Mech S-20 Horizontal Bandsaw Swivel Head Exc Shape

Hyd-Mech S-20 Horizontal Bandsaw Swivel Head Exc Shape

  • Matawan, New Jersey, United States
  • Jan 30th
Ramco Metal Horizonal Band Saw Metal Working Jet Dake Vertical Usa

Ramco Metal Horizonal Band Saw Metal Working Jet Dake Vertical Usa

  • Jackson, Michigan, United States
  • Jan 30th
RIDGID VERTICAL 14" WOOD BAND SAW - New 18TPI Blade

RIDGID VERTICAL 14" WOOD BAND SAW - New 18TPI Blade

  • Dunedin, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies