+ Post new Ad
2004 240 Ton TOSHIBA Electric EC 240V21-8Y Injection Molding Machine # 7786220, US $9300 – Picture 0
2004 240 Ton TOSHIBA Electric EC 240V21-8Y Injection Molding Machine # 7786220, US $9300 – Picture 0

2004 240 Ton Toshiba Electric Ec 240v21-8y Injection Molding Machine # 7786220

US $9300

  • Ogden, Utah, United States
  • Nov 18th
Open on mobile:
QR code
We are pleased to offer the following for your consideration: Ref # 7786220 One (1) 2004 240 Ton TOSHIBA Electric Plastic Molding Tonnage 242 Ton Shot Size 10 oz Platen 34.2" x 32.2" Tie Bar Spacing 24" x 22" Clamp Stroke 20.5" Min / Max Mold Height 9.8" / 22.4" Max Daylight 42.9" Ejector Stroke 5.1" Dimensions 19.5' x 5.3' x 6.6' Weight 21,200 lbs Equipped with:  V21 Control  Air Blow  RI  Contact K.D. Capital Equipment at 480-922-1674 with any questions, etc. Any descriptions of the condition of the equipment are not warranties and any equipment descriptions are intended only as a guide and their accuracy is not guaranteed and must be independently verified by the buyer.  *Machine locations may vary, please contact K.D. Capital for current locations.*

Directions

Similar products from IBM Processing

113 Ton, 8.2 Oz. Toshiba Injection Molding Machine '88

113 Ton, 8.2 Oz. Toshiba Injection Molding Machine '88

  • Salt Lake City, Utah, United States
  • Nov 19th
110 Ton, 5 Oz. Toshiba Injection Molding Machine '04

110 Ton, 5 Oz. Toshiba Injection Molding Machine '04

  • Hialeah, Florida, United States
  • Nov 19th
Boy 38mm Valve 4-piece High Abrasion 2.986" OAL

Boy 38mm Valve 4-piece High Abrasion 2.986" OAL

  • Laurens, South Carolina, United States
  • Nov 19th
1990 Cincinnati 165 Ton 8,9 Oz (252 gr) injection molding machine

1990 Cincinnati 165 Ton 8,9 Oz (252 gr) injection molding machine

  • Miami, Fl, United States
  • Nov 19th
1988 ENGEL165 Ton injection machine

1988 ENGEL165 Ton injection machine

  • Miami, Fl, United States
  • Nov 19th
(1984) WIND 200 Ton 12 Oz (340 Gr) injection molding machine

(1984) WIND 200 Ton 12 Oz (340 Gr) injection molding machine

  • Miami, Fl, United States
  • Nov 19th
2008 Sumitomo 50 Ton Accumulator Toggle Injection Molding Machine

2008 Sumitomo 50 Ton Accumulator Toggle Injection Molding Machine

  • Miami, Fl, United States
  • Nov 19th
IDEECO WATER HEATER ELEMENT7131ZU215136 12000WATT 480VOLT 3PH 2 1/2 threads

IDEECO WATER HEATER ELEMENT7131ZU215136 12000WATT 480VOLT 3PH 2 1/2 threads

  • Greensburg, Pennsylvania, United States
  • Nov 19th
Injection Molding Media ? - PTFE Daikin - Polyflon

Injection Molding Media ? - PTFE Daikin - Polyflon

  • Guilford, Connecticut, United States
  • Nov 19th
2012 JSW 650 Ton 33.7 Oz (964gr) Full Electric Injection Machine

2012 JSW 650 Ton 33.7 Oz (964gr) Full Electric Injection Machine

  • Miami, Fl, United States
  • Nov 19th
BOY Plastic Injection Molding Machine, 22S - 1oz Shot

BOY Plastic Injection Molding Machine, 22S - 1oz Shot

  • Cassopolis, Michigan, United States
  • Nov 18th
1994 60 Ton Engel ES200-60 TL, Injection Molding Machine-IMM # 7786059

1994 60 Ton Engel ES200-60 TL, Injection Molding Machine-IMM # 7786059

  • Longmont, Colorado, United States
  • Nov 18th
Sodick Tuparl Injection Molding Machine

Sodick Tuparl Injection Molding Machine

  • Pasadena, California, United States
  • Nov 18th
LOT OF (8) MAC MODEL RB 350 SURGE BINS / PORTABLE RESIN BINS

LOT OF (8) MAC MODEL RB 350 SURGE BINS / PORTABLE RESIN BINS

  • Fountain Valley, California, United States
  • Nov 18th
Arburg Horizontal Injection Molding Machine

Arburg Horizontal Injection Molding Machine

  • Pasadena, California, United States
  • Nov 18th
Foremost Grinder SCG-116

Foremost Grinder SCG-116

  • Sparrows Point, Maryland, United States
  • Nov 18th
Input keypad card SN. 117.210, ARB 666, Arburg used spare parts

Input keypad card SN. 117.210, ARB 666, Arburg used spare parts

  • Pegnitz, Germany
  • Nov 17th
Input keypad SN. 123.498, ARB 667, Arburg Selogica spare parts

Input keypad SN. 123.498, ARB 667, Arburg Selogica spare parts

  • Pegnitz, Germany
  • Nov 17th
Heating control card SN. 127.247 incl. SN. 121.119, ARB 644, 6-circuits, Arburg

Heating control card SN. 127.247 incl. SN. 121.119, ARB 644, 6-circuits, Arburg

  • Pegnitz, Germany
  • Nov 17th
New Hirschmann Boy 64120 Heater Band For Injection Molding, 240 VAC, 200 Watt

New Hirschmann Boy 64120 Heater Band For Injection Molding, 240 VAC, 200 Watt

  • Osseo, Minnesota, United States
  • Nov 17th

People who viewed this item also vieved

Pololu Zumo Chassis Kit No Motors (unassembled)

Pololu Zumo Chassis Kit No Motors (unassembled)

  • Miami, Florida, United States
  • Jan 30th
RDN Puller Cutter SA-2/212-2 appears to be missing a motor

RDN Puller Cutter SA-2/212-2 appears to be missing a motor

  • Del Rio, Texas, United States
  • Jan 30th
2Pcs - High Quality - 3D Printer - GT2 Timing Belt Pulley Aluminum Free Shipping

2Pcs - High Quality - 3D Printer - GT2 Timing Belt Pulley Aluminum Free Shipping

  • Littleton, Colorado, United States
  • Jan 30th
Drawer Magnet Inlet 3" #59270

Drawer Magnet Inlet 3" #59270

  • Holly, Michigan, United States
  • Jan 30th
NEW AMI 7301-197 HEATER ELEMENT 240V-AC 1IN 200W D413644

NEW AMI 7301-197 HEATER ELEMENT 240V-AC 1IN 200W D413644

  • Delta, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies