+ Post new Ad
2006 Cumberland 3030TF Granulator, Plastics # 7785520, US $9800 – Picture 0
2006 Cumberland 3030TF Granulator, Plastics # 7785520, US $9800 – Picture 0

2006 Cumberland 3030tf Granulator, Plastics # 7785520

US $9800

  • Elk Grove Village, Illinois, United States
  • Nov 1st
Open on mobile:
QR code
         7918  E McClain Drive Suite 101 Scottsdale AZ 85260   Tel: 480-922-1674 Fax: 480-922-1675 We are pleased to offer the following for your consideration: Ref # 7785520 (1) One 2006 Cumberland 3030TF GRANULATOR, PLASTICS Control: Open Rotor Granulator Package General Specs: Feed Throat 30" x 30" Rotor Blade Configuration 5 Blade Open Rotor Bed Knives 2 Horsepower 75 Tangential Feed Cutting Chamber  Dual Fly Wheels  Screen Size 3/8" Insulated Body Panels & Conveyor In-Feed Hopper  8.0" Right / Left Airveyor - Set up right hand  Hydraulic Assisted Drop Down Screen Cradle  Forklift Rail Base   Electrical requirements 230/460v Includes:  Sterling Blower Model 8010FV 8.0" OD inlet / outlet  Aluminum Impeller  #10 Discharge Cyclone W/Caster  8.0" OD Carbon Steel Connecting Pipe   21' Long x 26" Wide In-feed Conveyor W/ 4.0" tall Cleats (powered by 2.0 hp motor thru gearbox)  Across The line Starter / Controls for granulator   RAN PE FLOWER POTS  DOES NOT INCLUDE A FILTER HEAD We can provide shipping quotes upon your request.  Contact K.D. Capital Equipment at 480-922-1674 with any questions, etc. Any descriptions of the condition of the equipment are not warranties and any equipment descriptions are intended only as a guide and their accuracy is not guaranteed and must be independently verified by the buyer.  *Machine locations may vary, please contact K.D. Capital for current locations.*

Directions

Similar products from IBM Processing

8mmx200mm AC 110V 500W Single Ended Heating Element Cartridge Heater LW

8mmx200mm AC 110V 500W Single Ended Heating Element Cartridge Heater LW

  • Hong Kong, Hong Kong
  • Nov 3rd
2Pcs 220V 150W Heating Element Band Heater for Plastic Injection Machine 35x45mm

2Pcs 220V 150W Heating Element Band Heater for Plastic Injection Machine 35x45mm

  • HK, Hong Kong
  • Nov 3rd
2003 Conair Sepro Robot All-Servo Robot, Model PIP3041

2003 Conair Sepro Robot All-Servo Robot, Model PIP3041

  • MI, United States
  • Nov 3rd
Toshiba ISE 120 Ton Injection Molding Machine

Toshiba ISE 120 Ton Injection Molding Machine

  • Scottsburg, Indiana, United States
  • Nov 3rd
Two (2) 1996 165 Ton Cincinnati VT165 Injection Molding Machine-IMM # 7786116

Two (2) 1996 165 Ton Cincinnati VT165 Injection Molding Machine-IMM # 7786116

  • Grand Haven, Michigan, United States
  • Nov 3rd
DME EJECTOR PINS # EX6-N0-SHL-M6 --LOT OF 8 -- 5/64" DIAMETER X 6" LONG

DME EJECTOR PINS # EX6-N0-SHL-M6 --LOT OF 8 -- 5/64" DIAMETER X 6" LONG

  • Anderson, South Carolina, United States
  • Nov 3rd
Toshiba ISE 120 Ton Injection Molding Machine

Toshiba ISE 120 Ton Injection Molding Machine

  • Scottsburg, Indiana, United States
  • Nov 3rd
DME EJECTOR PIN-- 5/64" DIAMETER -- 6" LONG --HEAD DIAMETER 0.247"

DME EJECTOR PIN-- 5/64" DIAMETER -- 6" LONG --HEAD DIAMETER 0.247"

  • Anderson, South Carolina, United States
  • Nov 3rd
DME EJECTOR PIN -- 5/64" DIAMETER -- 6" LONG -- SMALLER 0.150 HEAD

DME EJECTOR PIN -- 5/64" DIAMETER -- 6" LONG -- SMALLER 0.150 HEAD

  • Anderson, South Carolina, United States
  • Nov 3rd
DME EJECTOR PIN # CT7-M6 -- LOT OF 19 --CLOSE TOLERANCE 3/32" DIA X 6" LONG

DME EJECTOR PIN # CT7-M6 -- LOT OF 19 --CLOSE TOLERANCE 3/32" DIA X 6" LONG

  • Anderson, South Carolina, United States
  • Nov 1st
DME EJECTOR PIN # EX-3-M6 --- LOT OF 20 ---- 3/64" DIAMETER X 6" LONG

DME EJECTOR PIN # EX-3-M6 --- LOT OF 20 ---- 3/64" DIAMETER X 6" LONG

  • Anderson, South Carolina, United States
  • Nov 1st
DME LATCH BAR # LL-103 -- LOT OF 2 -- 10" LONG

DME LATCH BAR # LL-103 -- LOT OF 2 -- 10" LONG

  • Anderson, South Carolina, United States
  • Nov 1st
Sumitomo 30 Ton Injection Molding Machine All Electric

Sumitomo 30 Ton Injection Molding Machine All Electric

  • Telford, Pennsylvania, United States
  • Nov 1st
1998 300 Ton Cincinnati VT300-21 Injection Molding Machine

1998 300 Ton Cincinnati VT300-21 Injection Molding Machine

  • Miami, Florida, United States
  • Nov 1st
TWO (2) 2005 Fanuc Roboshot - S-2000i 150A Injection Molding Machine

TWO (2) 2005 Fanuc Roboshot - S-2000i 150A Injection Molding Machine

  • Miami, Florida, United States
  • Nov 1st
Nissei ASB Injection Stretch Blowmolding Machines

Nissei ASB Injection Stretch Blowmolding Machines

  • Hialeah, Florida, United States
  • Nov 1st
DME EJECTOR PINS # EX-11-M6 --- LOT OF 18 -- 5/32" DIAMETER X 6" LONG

DME EJECTOR PINS # EX-11-M6 --- LOT OF 18 -- 5/32" DIAMETER X 6" LONG

  • Anderson, South Carolina, United States
  • Nov 1st
CINCINNATI MILACRON 375-32 E/P PLASTIC INJECTION MOLDING MACHINE. 375 TON.

CINCINNATI MILACRON 375-32 E/P PLASTIC INJECTION MOLDING MACHINE. 375 TON.

  • Chardon, Ohio, United States
  • Nov 1st
BENDIX Titanium Metal King Disc Brake Pads

BENDIX Titanium Metal King Disc Brake Pads

  • Hamtramck, Michigan, United States
  • Oct 31st
Bottle Machine, Blow Molding Machine, Blow Molder , PET Bottle Machine

Bottle Machine, Blow Molding Machine, Blow Molder , PET Bottle Machine

  • Miami, Florida, United States
  • Oct 31st

People who viewed this item also vieved

CHROMALOX CIR3058 HEATER CARTRIDGE ELEMENT 120V-AC 5-3/4 IN 700W B415958

CHROMALOX CIR3058 HEATER CARTRIDGE ELEMENT 120V-AC 5-3/4 IN 700W B415958

  • Buffalo, New York, United States
  • Jan 30th
WATLOW J47J26 HEATER CARTRIDGE ELEMENT 24V-DC 13-1/2 IN 400W B415947

WATLOW J47J26 HEATER CARTRIDGE ELEMENT 24V-DC 13-1/2 IN 400W B415947

  • Buffalo, New York, United States
  • Jan 30th
1.75 mm Filament 4 3D Printer. PLA BLACK & RED 4 Repraper, Reprap, MakerBot

1.75 mm Filament 4 3D Printer. PLA BLACK & RED 4 Repraper, Reprap, MakerBot

  • North Palm Beach, Florida, United States
  • Jan 30th
NEW TEMPCO HDC05624 HEATER CARTRIDGE 120V-AC 9-1/2X1/2 IN 400W D368055

NEW TEMPCO HDC05624 HEATER CARTRIDGE 120V-AC 9-1/2X1/2 IN 400W D368055

  • Delta, Ohio, United States
  • Jan 30th
1.75 mm Filament 4 3D Printer. PLA ORANGE & GREEN 4 Repraper, Reprap, MakerBot

1.75 mm Filament 4 3D Printer. PLA ORANGE & GREEN 4 Repraper, Reprap, MakerBot

  • North Palm Beach, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies