2015 Handle Portable 6 Parameter Patient Monitor Nibp Spo2 Ecg Temp Resp Pr

US $406

  • BEIJING,beijing, China
  • Jan 30th
portable 6-Parameter Patient Monitor NIBP SPO2 ECG TEMP RESP PR Optional printer  ICU CCU 6-Parameter Patient Monitor NIBP SPO2 ECG TEMP RESP PR TOUCH SCREEN Model: RPM-8000B  Statement: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.   All of our products are CE approved. Please kindly check the copy of the certificate in the listing below. CE Certification: 1. General Specifications: Size: 209mmx104mmx47.5mm Net Weight: 655g   Measurement Display: color TFT- LCD/touch screen Power Supply Indicator: Dual-color LED (red/green) Charging indicator: A green LED Prior: Storage and review data up to 9999 user ID and 3888groups via Trend Graph and Trend List. USB and Bluetooth data upload; Horizontal and vertical display selectable; Big font screen interface is easy to observe; Back light can be adjusted; Free advanced software Optional Bluetooth printer to print the waveform and data out.   Introduction for Palm Patient Monitor RPM-8000B Palm multi-parameter patient monitor has super high quality and very competitive price.  All-in-one designed module with 5 standard parameters: ECG, NIBP, SPO2, Pulse Rate and Temperature.   Free matched two sets advanced software is for data downloading and tele-monitoring, and has convenient & rapid Bluetooth printer can print datas and ECG waveform.  This machine can meet all requirements, and meet requirements of hospital & other departments in emergency treatment, first-aid, rescue,etc.      Function for Palm Patient Monitor Touch screen,5.0 inch color TFT LCD, simple for operating, quickly&accurately measure the data; Build-in rechargeable Li-battery, up to 15hours running time, support AC and DC power; Adjustable audible and visual alarms, and sensor off alarm; Long time monitoring and sleeping monitoring; Easy to carry, suitable for ambulance center, has the stand for fixing; Specifications Following is the specifications, which has complete configuration of ECG,TEMP, NIBP and SpO2. 1. General Specifications: Size: 209mmx104mmx47.5mm Net Weight: 655g Display Specification Measurement Display: color TFT- LCD/touch screen Power Supply Indicator: Dual-color LED (red/green) Charging indicator: A green LED  2. Power Supply AC Power Adaptor Input: 100~240VAC, 50/60Hz, 0.7A Output: DC 5V, 1.5A Battery Li-ion rechargeable battery, 3.7V,/7200mAH Operating Time: 15 hours with full battery capacity. (Condition: 25°C, NIBP working period is 15 minutes) Recharge Time: 10 hours. 3. Environment Temperature Working:0°C~45°C Transport and Storage: -25°C~85°C Humidity Working:30% ~85 % Transport and Storage: 30% ~95 % (no condensation) 4. Monitoring Parameter ECG Input:3- lead ECG cable, standard AAMI cable connector Lead Selection:I,II,III Gain Selection:x1,x2,x4,x8 Sweep Speed: 12.5, 25, and 50 mm/s Frequency Response: None filter: 0.05~100Hz (-3dB), filter: 0.5~40Hz (-3dB) Calibration Signal: 1mV square wave  Protection: Against electrosurgical interference and defibrillation Heart Rate Measuring Range: 20 bpm~300 bpm Renew Time: 1 time per beat Accuracy: ±1 bpm Alarm Mode: Audible and visual alarm SpO2  SpO2% Measuring Range:0%~100% Resolution:1 % Accuracy:±2 %(90%~99%), ±3 %(70%~89%),unspecified (0%~69%) Pulse Rate  Measuring and Alarm Range:20~300bpm Resolution: 1bpm Accuracy: ±1bpm NIBP  Method: Oscillometric Mode: Manual, Auto, STAT Measuring Interval in AUTO Mode: 1, 2, 3, 5, 10, 15, 20, 30, 45, 60 (min) Measuring Period in STAT Mode: 5 min Cuff Pressure Range:0 mmHg~300mmHg Pulse Rate Range:30 bpm~250bpm Measurement Rage: Adult 30 mmHg~255mmHg, Pediatric 30 mmHg~160mmHg Over-pressure Protection: Adult 300mmHg, Pediatric 220mmHg Pressure Resolution : 1mmHg The SYSTOLIC and DIASTOLIC values measured using this device shall be equal to those measured by trained medical personnel using cuff and stethoscope. The MEAN value measured using this device is equal to that measured using blood pressure measurement device.  Temperature Input: Body surface thermal-sensitive resistor temperature sensor Measuring Range: 0°C~50°C Accuracy: ±0.1°C 5. Storage and Review  Maximum Data Quantity: 3888 groups Maximum Trend Time: Continuous 129.6 hours Packing list  - Color palm patient monitor main unit 1 pc - 3-lead ECG cable ( include surface TEMP probe) 1pc - Adult finger SpO2 sensor 1 pc - Adult NIBP cuff 1 pc - NIBP extension tube 1 pc - PC software CD 1 pc - BlueTooth Radio 1pc - USB cable 1 pc - AC power adaptor 1 pc - The operator’s manual 1 pc Selectable Accessory - Pediatric finger Spo2 sensor  - Neonatal wrap SpO2 sensor  - Bluetooth printer (optional) Printer If you need it, you can contact me freely to make the offer. Type: Thermal micro-printer Printer Paper: 58 mm thermal paper,Paper roll diameter
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
5 standard parameters: ECG, NIBP, SPO2, Pulse Rate and Temperature
screen TFT LCD touch screen
General Specifications: Size: 209mmx104mmx47.5mm
warranty 18 months
Net Weight: 655g
feature touch screen ,optional Bluetooth printer ,

Directions

Similar products from Health Condition Monitors

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies