+ Post new Ad
20mm x 20mm Aluminum Extrusion for DIY 3D Printer/CNC: 884mm Length (1 of 4), US $10.00 – Picture 0
20mm x 20mm Aluminum Extrusion for DIY 3D Printer/CNC: 884mm Length (1 of 4), US $10.00 – Picture 1
20mm x 20mm Aluminum Extrusion for DIY 3D Printer/CNC: 884mm Length (1 of 4), US $10.00 – Picture 0
20mm x 20mm Aluminum Extrusion for DIY 3D Printer/CNC: 884mm Length (1 of 4), US $10.00 – Picture 1

20mm X 20mm Aluminum Extrusion For Diy 3d Printer/cnc: 884mm Length (1 Of 4)

US $10.00

  • New York, New York, United States
  • Jan 30th
Open on mobile:
QR code
Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. 884mm with holes: 7.3mm diameter at 247.5mm, 447.5mm, 647.5mm from left side. The holes barely affect the structural strength of the extrusion. Really useful for passing wires, or even for supports for rods or for leadscrews (see my other listing for a leadscrew machined to 6mm on the end).

Directions

Similar products from Metals & Fusions

TELLURIUM COPPER PLATE 2" X 4" X 12" LONG

TELLURIUM COPPER PLATE 2" X 4" X 12" LONG

  • Hudson, New York, United States
  • Jan 30th
TELLURIUM COPPER PLATE 1/4" X 4" X 12" LONG

TELLURIUM COPPER PLATE 1/4" X 4" X 12" LONG

  • Hudson, New York, United States
  • Jan 30th
Steel Woven Mesh Sheet, Zinc Galvanized Finish, 12" Width, 24" Length.

Steel Woven Mesh Sheet, Zinc Galvanized Finish, 12" Width, 24" Length.

  • Summerville, South Carolina, United States
  • Jan 30th
ALUMINUM 6061 2.250" Dia. round bar stock end cut approx. 4.800" long- 1 pc.

ALUMINUM 6061 2.250" Dia. round bar stock end cut approx. 4.800" long- 1 pc.

  • Hawthorne, New Jersey, United States
  • Jan 30th
Aluminum Flat Diamond Plate Sheet Stock 12 in x 48 in, 1/16 thick, 12in, 12 in,

Aluminum Flat Diamond Plate Sheet Stock 12 in x 48 in, 1/16 thick, 12in, 12 in,

  • Old Fort, North Carolina, United States
  • Jan 30th
Aluminum Flat Diamond Plate Sheet Stock 6 in x 48 in, 1/16 thick, 6in, 6 in, 6”,

Aluminum Flat Diamond Plate Sheet Stock 6 in x 48 in, 1/16 thick, 6in, 6 in, 6”,

  • Old Fort, North Carolina, United States
  • Jan 30th
Aluminum Plate Alloy 6061-T651 3.50 Thick x 48.50 Wide x 117.00 Long

Aluminum Plate Alloy 6061-T651 3.50 Thick x 48.50 Wide x 117.00 Long

  • New Stanton, Pennsylvania, United States
  • Jan 30th
Aluminum Flat Diamond Plate Sheet Stock 1 in x 48 in, 1/16 thick, 1in, 1 in, 1”,

Aluminum Flat Diamond Plate Sheet Stock 1 in x 48 in, 1/16 thick, 1in, 1 in, 1”,

  • Old Fort, North Carolina, United States
  • Jan 30th
316 Stainless Steal marine grade tube shaft bar rail post 1" Diameter tube

316 Stainless Steal marine grade tube shaft bar rail post 1" Diameter tube

  • Pensacola, Florida, United States
  • Jan 30th
20mm x 20mm Aluminum Extrusion for DIY 3D Printer/CNC: 1285mm Length (4 of 4)

20mm x 20mm Aluminum Extrusion for DIY 3D Printer/CNC: 1285mm Length (4 of 4)

  • New York, New York, United States
  • Jan 30th
scrap catalytic converter #3

scrap catalytic converter #3

  • Arcade, New York, United States
  • Jan 30th
scrap catalytic converter #4

scrap catalytic converter #4

  • Arcade, New York, United States
  • Jan 30th
4140 Bar Stock Rounds Annealed Tool Steel Two Pieces 3/4 By Six Inches

4140 Bar Stock Rounds Annealed Tool Steel Two Pieces 3/4 By Six Inches

  • Cloquet, Minnesota, United States
  • Jan 30th
5/8" x 3.5" Hot Rolled Carbon Steel A36 Flat Bar 6" length -

5/8" x 3.5" Hot Rolled Carbon Steel A36 Flat Bar 6" length -

  • Newport News, Virginia, United States
  • Jan 30th
Cress Heat Treat Furnace NEW USA MADE Model # C-601

Cress Heat Treat Furnace NEW USA MADE Model # C-601

  • Columbus, Ohio, United States
  • Jan 30th
3 pieces of 48" x 120" (4" x10') Aluminum diamond plates

3 pieces of 48" x 120" (4" x10') Aluminum diamond plates

  • Ontario, California, United States
  • Jan 30th
3 Scrap Catalytic Converters For Platinum Recovery 2 NISSAN IMPORTS AND 1 GM

3 Scrap Catalytic Converters For Platinum Recovery 2 NISSAN IMPORTS AND 1 GM

  • Lakewood, New Mexico, United States
  • Jan 30th
Scrap catalytic converter recovery

Scrap catalytic converter recovery

  • Wasilla, Alaska, United States
  • Jan 30th
80-20 INSIDE CORNER GUSSETS 15S 4332

80-20 INSIDE CORNER GUSSETS 15S 4332

  • Princeton, Minnesota, United States
  • Jan 30th
FerroSulphide Ferro Sulphide alloy metal shot dust powder chip nugget

FerroSulphide Ferro Sulphide alloy metal shot dust powder chip nugget

  • West Jordan, Utah, United States
  • Jan 30th

People who viewed this item also vieved

Vertical Panel Saw: Dewalt

Vertical Panel Saw: Dewalt

  • Laramie, Wyoming, United States
  • Jun 9th
Band Saw

Band Saw

  • Daytona Beach, Florida, United States
  • Jun 9th
Cat 50 Kennametal CNC NPA 150 S3CA4 & S3CG2 nose piece collet

Cat 50 Kennametal CNC NPA 150 S3CA4 & S3CG2 nose piece collet

  • Punta Gorda, Florida, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies