220 V Welding Inverter Dnepr-m With Igbt Technology, Mini ММА 260 , 260 A

US $7900

Ternopil, default, Ukraine
May 25th

Open on mobile:
QR code

Welding inverter Dnepr-M mini MMA 260 3359 uah Welding inverter "Dnepr-M" mini MMA 260 - an ideal tool for a variety of welding applications including cutting and welding metal in the domestic environment. Through innovative IGBT technology, could significantly reduce the overall dimensions and significantly simplify the inverter to operate. Advantages of the welding inverter "Dnepr-M" mini MMA 260: • Extremely light weight only 2.95 kg and small overall dimensions of 255 x 110 x 160 mm, it allows you to make even high-altitude work, and greatly simplify its transportation, because it can be put even in a normal bag • Easy to use and easy adjustment of the welding current, the inverter will allow to use even for beginners and amateurs • The range of the adjustable welding current is 20 to 260 A, which will allow you to work with an electrode diameter of 5 mm • The inverter has a capacity of 8.8 kW, and is powered by mains electricity supply to 220 V without causing overload it, which prevents any interference in the domestic appliances and removes this effect as a "flickering" light bulbs • Carries out even under low voltage network (160 V), due to a power strip increased capacity 1880-2350 uF capacitors 4 Welding inverter "Dnepr-M" mini MMA 260 has a number of distinguishing features, in particular has the function "Hotstart" which facilitates the ignition of the electric arc, and allows you to immediately start welding work even after a long break. Also installed on the inverter function "Anti stick", which prevents sticking electrodes. Increased device reliability provide innovative IGBT inverter power transistors, which have a 30% higher capacity. Other features of the "Dnepr-M" mini MMA 260: • The high level of efficiency (efficiency 85%) • Stable welding current and stable welding arc device and a rectifier 8 keys (4 on each shoulder) allow for continuous operation at maximum current without the threat of overheating and failure Type Welding machines type, electric Voltage 220 V Welding current 260 A The diameter of the welding electrode is 1.6 - 5.0 mm Overheating protection Yes additional characteristics Power consumption 8.8 kW Range welding current: 20-260 A Duty cycle: 60% IGBT technology Equipment Welding inverter electrode holders face shield A hammer Brush for removing slag Dimensions 255 x 110 x 160 mm Weight 2.95 kg Warranty 24 months