220v 3kw Variable Frequency Inverter Vector Control 1 Phase To 3 Phase Frequency

C $225.59

Guangzhou, China, China
Jul 21st

Open on mobile:
QR code

220V 3KW Variable Frequency Inverter Vector Control 1 Phase to 3 Phase Frequency Specifications: Name:Variable Frequency Inverter Model:A59993 Color:black Input:1PH AC 200-240V±10% 50-60Hz Output:3PH 0-500Hz Power:3KW Current:13A Control Method:voltage vector Braking Resistor:100 Features: -Built-in PID control function, can easily constitute a simple automated control system. -Frequency setting mode: digital setting, analog setting, serial communication setting, PID setting and so on. -Other functions: deceleration stop or freewheel stop, DC brake, automatic reset restart, PLC program control and so on. -Provide a variety of fault protection: over-current, overvoltage, undervoltage, over temperature, phase loss, overload and other protection. Safety Precaution: - Do not arbitrarily reform the inverter. - Do not do the voltage withstand test on the inverter. - Do not connect the contactor with the output circuit. - When power is on, do not change the wiring and terminal. - Do not connect the power to the U, V, W output terminals. - Before wring, please make sure that the input power is off. - The grounding terminals must be connected with the ground. - Please connect the brake resistor according to the wiring diagram. - The wring work should be operated by the professional electrical engineer. - Cut off the main circuit power before doing some check and maintain work. - Having paused circuit wiring emergently, please make sure that the check is effective. - Do not touch the terminals of inverter, which are very dangerous because there is high voltage on them. - Confirm that the operation signal is cut off. Before reset the alarm device,or the inverter may start suddenly. - Please check whether the voltage of the AC main circuit power is consistent with the rated voltage of the inverter. - Mare sure to install a protection cover before power-on. When removing the cover, be sure to make the power off. - Do not connect the output wire of the inverter with the shell, and pay attention that the output wire should not be short-circuited. - If you want to reset the inverter with the retry function, do not get close to the mechanical equipment, because the inverter will restart suddenly when the alarm stops. Package Included: 1 x Variable Frequency Inverter 1 x Manual

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Undisclosed
MPN	Does not apply