+ Post new Ad
25 pounds scrap - 2 inch Diameter Cu Copper Round Rod Bars (solid lathe stock), US $838 – Picture 0
25 pounds scrap - 2 inch Diameter Cu Copper Round Rod Bars (solid lathe stock), US $838 – Picture 0

25 Pounds Scrap - 2 Inch Diameter Cu Copper Round Rod Bars (solid Lathe Stock)

US $838

  • Corpus Christi, Texas, United States
  • Jun 25th
Open on mobile:
QR code
Two buss bars, weight is 12.5 pounds each, diameter at the thick part in the middle is 2" plus or minus .125" The two inch diameter portions are about 9.5 inches long and the bars are about 17.25 inches overall There is one small hole in each bar about 1/8 inch diameter about 1/4 inch deep for a locking pin that is no longer there The black parts are where rubber insulators were that have been removed These are solid copper and very pure, they make great dumbbells, rolling pins, fishing weights, or just plain paperweights  

Directions

Similar products from Metals & Fusions

3/16" thick 4' by 10' stainless Steel sheet. polished 316L

3/16" thick 4' by 10' stainless Steel sheet. polished 316L

  • Orangevale, California, United States
  • Oct 19th
6.4 DPF Diesel particulate filter Exhaust System OEM Used 6.4l

6.4 DPF Diesel particulate filter Exhaust System OEM Used 6.4l

  • Signal Mountain, Tennessee, United States
  • Oct 19th
indium alloy assayed 98.8 % pure

indium alloy assayed 98.8 % pure

  • Hopatcong, New Jersey, United States
  • Oct 19th
Scrap Catalytic Converter for Platinum, Palladium and Rhodium Recovery Only

Scrap Catalytic Converter for Platinum, Palladium and Rhodium Recovery Only

  • Tioga, Pennsylvania, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 12" Long T6511 New Solid Bar Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 12" Long T6511 New Solid Bar Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
2-1/2'' SQUARE 6061 ALUMINUM 16'' LONG

2-1/2'' SQUARE 6061 ALUMINUM 16'' LONG

  • Alexandria, Minnesota, United States
  • Jun 25th
A Lot Of Four Aluminum Corner Brackets

A Lot Of Four Aluminum Corner Brackets

  • Edwards, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 11" Long T6511 New Solid Bar Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 11" Long T6511 New Solid Bar Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 13" Long T6511 New Solid Bar Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 13" Long T6511 New Solid Bar Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
A Lot Of four 3 X 6 X 0.25" Aluminum Joining Plates

A Lot Of four 3 X 6 X 0.25" Aluminum Joining Plates

  • Edwards, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 14" Long T6511 New Solid Bar Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 14" Long T6511 New Solid Bar Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 15" Long T6511 New Solid Bar 1.0 Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 15" Long T6511 New Solid Bar 1.0 Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 16" Long T6511 New Solid Bar 1.0 Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 16" Long T6511 New Solid Bar 1.0 Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 17" Long T6511 New Solid Bar 1.0 Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 17" Long T6511 New Solid Bar 1.0 Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 18" Long T6511 New Solid Bar 1.0 Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 18" Long T6511 New Solid Bar 1.0 Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 19" Long T6511 New Solid Bar 1.0 Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 19" Long T6511 New Solid Bar 1.0 Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 20" Long T6511 New Solid Bar 1.0 Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 20" Long T6511 New Solid Bar 1.0 Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1" X 9" 6061 ALUMINUM FLAT BAR 21" Long T6511 New Solid Bar 1.0 Mill Stock Plate

1" X 9" 6061 ALUMINUM FLAT BAR 21" Long T6511 New Solid Bar 1.0 Mill Stock Plate

  • Colorado Springs, Colorado, United States
  • Jun 25th
1/8" OD x 100' Length x .020" Wall 304/304L Stainless Steel Tubing Coil

1/8" OD x 100' Length x .020" Wall 304/304L Stainless Steel Tubing Coil

  • Port Matilda, Pennsylvania, United States
  • Jun 25th
Aluminium Scrap

Aluminium Scrap

  • Tacoma, Washington, United States
  • Jun 25th

People who viewed this item also vieved

New Walter Valenite ESU16901 Indexable Tool Holder Insert Cartridge

New Walter Valenite ESU16901 Indexable Tool Holder Insert Cartridge

  • Leopolis, Wisconsin, United States
  • Jan 30th
New Enduro 32209 Bearing

New Enduro 32209 Bearing

  • Leopolis, Wisconsin, United States
  • Jan 30th
New Valenite ESU16897 H-144799 Indexable Tool Holder Insert Cartridge

New Valenite ESU16897 H-144799 Indexable Tool Holder Insert Cartridge

  • Leopolis, Wisconsin, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies