250 Ton Rutil Rso 1200/250 Horizontal Rubber Injection Press; Mint Condition!!

US $69,500.00

  • Casa Grande, Arizona, United States
  • Jan 30th
Record #3225 (1) Used 250 Ton Rutil RSO 1200/250 Horizontal Rubber Injection Molding Press; S/N 130/322; Mfg. 2005 Specifications: Bed Area.........................................................24" F-B x 25 1/2" T-B Ram Area........................................................22 5/8" F-B x 25 1/4" T-B Distance Between Posts..................................18" F-B x 20" T-B (nominal) Post Diameter..................................................6" Injection Unit:      Injection Capacity / Shot Size......................1,100 cc (67.126 in3)      Injection Pressure.......................................1700 kg/cm2 (24,179 psi)      Screw Diameter...........................................45 mm (1.77")      Piston Diameter...........................................80 mm (3.15")      Injection Stroke...........................................220 mm (8.66")      Hydraulic Motor..........................................450 cc (27.46 in3)      Max. Working Pressure..............................160 kg/cm2 (2,275 psi) Clamping Unit:      Heating Platens...........................................610 x 640 mm (24" x 25.2")      Clamping Force...........................................250 tons (226.8 metric tons)      Mold Regulation..........................................195 mm (7.68")      Maximum Mold...........................................465 mm (18.3")      Minimum Mold............................................270 mm (10.63")      Movable Platen Stroke................................750 mm (29.5")      Clamping Cylinder Hydraulic Pressure........260 kg/cm2 (3,698 psi) Power:      Electric Motor.............................................22 kW (29.5 HP)      Platens Heating..........................................16 kW      Thermoregulator Units...............................21 kW Hydraulic Tank Capacity...................................200 L (52.8 gal.) Electrical Characteristics.................................480 VAC / 60 Cycle Environmental Conditions:      Functioning Temperature............................18 °C - 45 °C (64.4 °F - 113 °F)      Storage Temperature..................................5 °C - 55 °C (41 °F - 131 °F)      Humidity.....................................................30% - 90%      Altitude.......................................................Up to 1,000 m (3,280 ft.) Equipped With:      Automatic Brushing (2) Station      Injection unit      Operator interface      Hydraulic unit      Control Hardware      (2) Tanks      Manuals Dimensions......................................................196.06" L x 102.36" W x 141.73" H (4.98m L x 2.6m W x 3.6m H) Weight..............................................................29,763 lbs. (13,500 kg) F.O.B................................................................Casa Grande, AZ ***Please contact us about shipping rates before you request a rate quote though this website - Thank you*** For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax   804 West Gila Bend Hwy. Casa Grande, AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock, we have the largest inventory in Arizona and New Mexico. This includes presses (OBI, hydraulic, mechanical, platen, straight-side, straightening & extrusion), press brakes, apron/finger/box & pan brakes, blast cleaners, air compressors, boring mills (both horizontal & vertical), chip conveyors, coil equipment (consisting of reels, straighteners, feeders, cradles & levelers), CMM's, parts washers, radial arm drills, drill presses, dust collectors, generators, transformers, grinders (tool & cutter, universal, surface, drill), lathes (vertical, horizontal, wheel), ovens, furnaces, process equipment, hydraulic pumps, turret punches, ironworkers, plate rolls, power hack saws, bandsaws, shapers, planers, shears, threaders, vibratory finishers, welders, welding prepositioners, as well as forklifts, cranes, and material handling equipment. We also specialize in all types of saws – extended height vertical band/plate saws, horizontal band type, power hack, and many types of custom table/feed sawing systems. Centrally located in Casa Grande, AZ, we can demonstrate many machines under power at our 100,000 sq/ft warehouses. Most machines have been reconditioned and are ready for shipment, installation, and production.   Copyright 2007 Peterson Machinery Sales - Division of Chicago Casket Company, an Illinois Corporation     TERMS & CONDITIONS OF SALE   (1)     PAYMENT TERMS: Payment due prior to delivery unless otherwise stated on the front of the invoice.  A service charge of 1 1/2 % per month will be assessed on all accounts over 30 days past due.   (2)     TAXES:  All sales are subject to applicable federal, state, and local use, sales and excise taxes which the buyer agrees to pay and which may be billed as part of the selling price, or separately, if the seller is required by any taxing authority to collect and pay such tax.  Arizona resident businesses or individuals must complete and submit with Purchase Order, Transaction Privilege Tax Exemption Form ADOR 5000.   (3)     30 DAY RETURN PRIVILEGE: Unless otherwise stated, every machine offered from our stock is guaranteed to be mechanically satisfactory to the purchaser or returnable in the same condition as shipped, freight prepaid, within 30 days for a complete refund.   (4)     WARRANTY DISCLAIMER: The goods described herein are pre-owned used goods and are offered “as is.”  Seller makes no warranties of any kind whatsoever, expressed or implied, and ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED and excluded from this agreement.  All specifications and descriptions of said goods are approximate only.  Seller makes no representation warranty that said goods conform to any specification, description of condition.  It is the Buyer’s responsibility to inspect the goods and to ascertain if the specifications, descriptions and condition of goods conform to the Buyer’s requirements.  Any warranty concerning said goods made by the third party is enforceable only against the third party and not the Seller.   (5)     CLAIMS: Any and all claims for errors in merchandise must be made in writing immediately upon receipt of goods;  no credit will be allowed on returned goods without our permission.  It is expressly agreed that Buyer’s sole and exclusive remedy for any claims arising under this agreement against the Seller shall be limited to return of the goods and repayment of the purchase price, or to repair or replacement of the goods at the Seller’s option.  In no event shall the Seller be responsible for special or consequential damages.   (6)     QUOTATIONS AND ACCEPTANCES: Terms of the proposal shall be accepted by the Buyer upon the issuance of a purchase order.  By the issuance of a purchase order, the Buyer assents completely and exclusively to the terms and conditions herein.  All proposals and acceptances orders are made with the mutual understanding that orders are not subject to cancellation.  The shipping date is approximate only and may be subject to delays.  This agreement shall be an Arizona contract and shall be interpreted and administered for all purposes under the laws of the state of ARIZONA..   (7)     MACHINE USE AND SAFETY: Buyer acknowledges that the good(s) described herein are pre-owned (used) goods which were neither designed nor manufactured by the Seller, nor does the Seller have any knowledge or control over the prior use, or misuse of the goods or the future application of these goods by the Buyer.  It is the Buyer’s (user) responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation, or set and to adequately safeguard the machine(s) to conform to all federal, state, local government safety stands, and all industry safety standards.   (8)     INSPECTION:  Purchaser shall have the right to inspect the merchandise at the place of shipment prior to time of shipment.   (9)     TITLE:  Title shall not pass to purchaser with delivery of the above personal property, but shall remain vested in Seller until the entire purchase price is paid.   (10)  WAIVER-INDEMNIFICATION: Buyer hereby (1) Waives, releases and discharges any and all claims (with the exception of claims for breach of this agreement, of any and every kind (including but not limited to injury or death or any person or damage to property), which it may have at any time against Seller, its agents or employees, by reason of or arising out of any condition or defect of the goods said hereunder, including by limited to any claimed improper design, specifications or manufacturing defect of goods sold hereunder, or devices; and (2) covenants to indemnify and hold harmless Seller, its agents and employees or, from and against any and all loss, damage, expense, claims, suits, cost of defense, including attorney’s fees or liability which seller or any of its employees may sustain or incur at any time for or by reason of any injury to or death of any person or persons or damage to any property, arising out of any condition or defect of the goods sold hereunder or any claimed inadequate or insufficient safeguards or safety devices, or warnings. (11) ENTIRE AGREEMENT: These terms and conditions together with the provisions contained in the accompanying documents hereof are intended by the Seller and Buyer to be a complete and exclusive statement of the terms of the agreement, and such agreement may not be modified, amended or waived, except by a writing executed after the date hereof by an authorized officer or seller. All prior conversations and representations with reference to this subject matter are superseded by this agreement. Seller shall not be bound by any terms of Buyers purchase order forms or other documents which attempt to impose conditions at variance with Seller’s terms and conditions of sale set forth herein unless the same shall be specifically agreed to in writing by a duly authorized officer of the Seller. Seller objects to provisions contained in buyer’s forms which are different or are in addition to the terms herein. Buyer’s purchase order is accepted expressly conditional on Buyer’s assent to the terms and conditions herein, as the complete and exclusive statement of the terms of this agreement, which asset shall be manifested by Buyer accepting or retaining possession of the goods described herein.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Rutil
Country/Region of Manufacture Italy
Model RSO-1200/250
Serial Number 130/322

Directions

Similar products from IBM Processing

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies