2pcs 445nm 1.8w Blue Laser Diode (a Type)+1 Safety Goggles For 405nm,445nm,532nm

US $1700

  • ISTANBUL, Turkey
  • Oct 23rd
2pcs 445nm laser diodes (5.6mm TO-18 ) are extracted from a brand new laser-based DLP projector .  it can output up to 1.8-2 Watts with proper heat sinking/cooling. But, I recommend 1.6W or less for the longest life (Typical current is 1.44A or less) The constant current driver is highly recommended. Each diode is tested prior to shipment, and is packed in a sealed antistatic bag. Please be sure to observe proper ESD safety practices when handling them. And please be sure opertor has enough DIY and electronics experience I recommend  :   - Never solder to the bare diode.  Always first install the diode in a heatsink .    - Use a small ESD-safe soldering iron   - max 5 seconds soldering time for per pin. Caution:The laser safety goggles must be worn when operating this diode     And Blue, Green,Violet Laser Protection Goggles, Safety Glasses   (for 405nm, 445nm, 532nm - New but no box)    OD : 2-2.1 at 405nm and 532nm    OD : 2.3 at 445nm ( OD of 2.3 allows  ~1/200 of the laser light energy to be transmitted.)   Do not hold laser beam directly to the eye, even although the goggles. esref hukum, esref engin hukum

Directions

Similar products from Laser Modules

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies