2sf29els 2.85gpm 1500psi 1725rpm 5/8" Shaft Electric Flange

US $470

  • Lake Havasu City, Arizona, United States
  • Jun 17th
  Photo Of Cat Pumps may not be exact photo of model, Please pay attention to model number of pump you need!!! PUMP FEATURES: UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities. Ultimate portability, less than 11 pounds, less than 10" long. Regulating unloader is standard on each pump to assure system pressure control and pump protection Technical Notes SPECIFICATIONS: Plunger Pump Direct Drive Maximum Volume: 2.85 GPM Maximum Discharge Pressure: 1500 PSI Maximum Inlet Pressure: 75 PSI Maximum Pump Speed: 1725 RPM Minimum Horsepower Requirements: 3.0 bhp Bore: .708" (18mm) Stroke: .177" (4.5mm) Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil Maximum Fluid Temperature: 160 Degrees F. Inlet Port: 3/8" FPT Discharge Ports: Dual 3/8" FPT By-pass Port: 1/4" FPT Dimensions: 9.13" x 6.65" x 6.50" Weight: 11.83 lbs Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.   WARRANTY This product is warranted by the manufacturer to be free from defects in workmanship and meterail for five years. This warranty DOES NOT APPLY to defects caused by the FAULT or NEGLIGENCE of the buyer or third party, to the improper use of the product as a component part, to defects reported to the manufacturer AFTER the WARRANTY PERIOD has EXPIRED or to the NORMAL WEAR of the component pasrts of the product such as seals, cups, o-rings, valves, etc. This express warranty is in substitution for and in lieu of all other warranties, whether expressed or implied, including, without limitation, any warranties or merchantability or fitness for a particular purpose and all such warranties are hereby disclaimed and excluded by the manufacturer. THIS WARRANTY IS SUBJECTED TO THE FOLLOWING CONDITIONS: SPECIFICATIONS: Pump operation must be within RPM, DISCHARGE PRESSURE and INLET PRESSURE specifications. A pressure relief valve must be correctly installed. PUMPED FLUIDS: The warranty is VOID id pump operations commences without sufficient fluid to the pump. DO NOT RUN DRY. DO NOT PUMP ACIDS or ABRASIVE FLUIDS without manufacturer's written consent. Contact manufacturer for additional information on questionable fluids and alternative constructions. LUBRICATION: The warranty is VOID is pump operation commences WITHOUT OIL IN THE CRANKCASE. Fill crankcase per pump specifications with special CAT pump oil. Fill gearboxes with required lubricant before operation. Check specifications for gearlube or oil TEMPERATURE: Protect pump from freezing. Do not store in area with freezinf conditions. Drain completely of pumpsed fluid. Flush with antifreeze. Do not operate pump which contains frozen fluid. Do not store or operate in excessively high temperature areas without proper ventilation. USE OF OTHER THAN CAT PUMPS PARTS OR THEIR EQUIVALENT VOIDS THIS WARRANTY The buyer agrees that the sole and exclusive remedy in law or in equity for breach of any and all warranties and the sole and exclusive remedy for the manufacturer's liability of any kind (including, without limitation, liability for negligence) with respect to the product and all other performance by the manufacturer will be limited to the REPAIR OF, OR AT MANUFACTURER'S OPTION, THE REPLACEMENT OF THE PRODUCT. Buyer further agrees that manufacturer will, in no event, have any responsibility or bear any liability for (a) the cost of labor for the removal of any defective product or the installation of any replacement porduct, or (b) the cost of transportation to the manufacturer of the defective products returned for evaluation. Finally, buyer agrees that the manufacturer shall not be liable for any other loss, damage, or expense, including any special, incidental, or consequential loss or damage (including without limitation lost profits), even if the manufacturer has been advised of the possibility of such potential loss or damage.   ABC Motorsports is dedicated to provide fast service at a great price!! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. This may not be the exact picture of the pump, please pay attention to the part number and specifications. Thank you.

Directions

Similar products from Power Washer Accessories

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies