2wd Or 4wd Tracked Robot Beverage Dispenser Diy Chassis Kits For Arduino

US $4900

  • Aguadilla, Puerto Rico, United States
  • Oct 24th
This kit has been tested.  The entire bot is 3D printed.    You will receive a DIY kit with the following:  I call this one SMALL-e,  and it is capable of dispensing or carrying a beverage for you.  66 track pieces assembled into 2 tracked sides Right and Left 6 printed internal wheels 3 on each side, these get attached to motors and move tracks Right and Left Internal track and wheel assembly Right and Left External Track and wheel asembly Bottom frame attachment.  This holds the Internal and External track and wheel assembly together Top frame attachment for accessories.  You can put your Arduino and motor shield here. 2 Top level tiers Screw and nuts Measurements of chassis are 10.5" Long, 7.5"Wide, 8.5" Tall 2-Small-e arms Small-e beverage dispenser tray Small-e face The Beverage tray is place facing the back of the chassis so that if you place a sensor inside the face; when it scan it would not be obstructed by beverage. This kit chassis can accomodate 2 or 4 3-6v motors.  The motors go attached to the internal wheels which are in turn held in place by the track and wheel assemblies.  Nothing poorly created here.  All well built and tested to ensure tracks move as they should.  The key is utilizing 2 9v batteries in parallel.  They will move this bot with no problems.   I have use a 10 AA battery pack and it is superb in its movement. This kit will not be assembled.  I will send instructions on how to assemble it.  Very easy to put together.  There is a total of 30+ screws needed for assembly and they come included with kit. The kit will be sent ensuring protection of items by utilizing bubble packaging material.    THE COLORS OF THE MATERIAL MAY CHANGE BUT YOU WILL GET THE SAME EXACT MODEL, This is a similar version created by timmiclark in Thingiverse, with some modifications, and a significant amount of adjustment in order for it to work correctly.  The Small-e face, arms and beverage tray were designed by me. THIS IS A VERY STURDY NO NONSENSE ROBOTICS CHASSIS. If you need more than one.  Please email me before ordering.  I can accomodate your needs.

Directions

Similar products from Robot Kits, Robot Arms & Legs & Robotics Spare Parts

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies