+ Post new Ad
3/16" Acetal Delrin Natural Co-Polymer Plastic Sheet Acetyl .187" x 12" x 48", US $230 – Picture 0
3/16" Acetal Delrin Natural Co-Polymer Plastic Sheet Acetyl .187" x 12" x 48", US $230 – Picture 0

3/16" Acetal Delrin Natural Co-polymer Plastic Sheet Acetyl .187" X 12" X 48"

US $230

  • Wichita, Kansas, United States
  • May 26th
Open on mobile:
QR code
Acetal (Delrin) Plastic Sheet Saw Kerf & Tolerance: +/- .0125" Acetal is a high strength, low friction engineering plastic that has excellent wear properties in both wet and dry environments. Good dimensional stability and ease of machining make acetal an outstanding choice for applications requiring complex machining to tight tolerances. Homopolymer acetal (Delrin®) has superior room temperature strength, stiffness, and toughness. Copolymer acetal has superior performance in continuous high heat and hot water environments. Copolymer acetal also tends to have less porosity than homopolymer acetal Key Characteristics: • Strong and stiff • Excellent machinability • Good dimensional stability • Low moisture absorption • Excellent wear properties in both wet and dry environments • Low friction • Good chemical resistance • Homopolymer and copolymer grades available • FDA compliant grades available • Enhanced bearing and wear grades available • Glass-filled grades available • Natural (white), black, and colors available Applications: • Bearings and bushings • Pump and valve parts • Manifolds • Gears • Wear pads • Jigs and fixtures • Packaging machinery parts • Food processing machinery parts • Electrical components Free Cut Program: If you need this piece cut down, we offer FREE CUTTING of anything you buy. LIMIT OF 5 cuts per piece. Square or Rectangle pieces only. Please provide a note after payment has been processed. Shipping and handling: We will ship this product within 2 business days after your payment is cleared. The tracking number will be sent to your paypal registered Email box within 48 hours through PayPal. If you do not receive the email notice please contact us. U.S. 48 Contiguous States Addresses: The order will be shipped via UPS ground service. P.O.Box address is not acceptable please provide physical address and contact phone no. in case of undelivered by shipping carrier. Express shipment service is available, please email or call us.

Directions

Similar products from Acetyl & Delrin Materials

1" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.00" x 12" x 48"

1" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.00" x 12" x 48"

  • Oklahoma City, Oklahoma, United States
  • May 27th
5/8" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl .625" x 12" x 12"

5/8" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl .625" x 12" x 12"

  • Springfield, Missouri, United States
  • May 27th
1-1/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.25" x 12" x 12"

1-1/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.25" x 12" x 12"

  • Oklahoma City, Oklahoma, United States
  • May 27th
1-1/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.25" x 12" x 24"

1-1/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.25" x 12" x 24"

  • Oklahoma City, Oklahoma, United States
  • May 27th
3/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl .750" x 24" x 24"

3/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl .750" x 24" x 24"

  • Springfield, Missouri, United States
  • May 27th
1" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.00" x 12" x 24"

1" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.00" x 12" x 24"

  • Oklahoma City, Oklahoma, United States
  • May 27th
3/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl .750" x 24" x 48"

3/4" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl .750" x 24" x 48"

  • Springfield, Missouri, United States
  • May 27th
1" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.00" x 24" x 24"

1" Acetal Delrin Black Co-Polymer Plastic Sheet Acetyl 1.00" x 24" x 24"

  • Oklahoma City, Oklahoma, United States
  • May 27th
BLACK ACETAL DELRIN SOLID RODS 3/8 INCH O.D. - SIX PIECES 12 INCHES LONG

BLACK ACETAL DELRIN SOLID RODS 3/8 INCH O.D. - SIX PIECES 12 INCHES LONG

  • Edmonds, Washington, United States
  • May 27th
5/8" Acetal Delrin Natural Co-Polymer Plastic Sheet Acetyl .625" x 12" x 24"

5/8" Acetal Delrin Natural Co-Polymer Plastic Sheet Acetyl .625" x 12" x 24"

  • Springfield, Missouri, United States
  • May 26th
DELRIN RODS 3/8 INCH O.D. - TWO PIECES 12 INCHES LONG - ACETAL BLACK

DELRIN RODS 3/8 INCH O.D. - TWO PIECES 12 INCHES LONG - ACETAL BLACK

  • Edmonds, Washington, United States
  • May 26th
DELRIN NEW 2 PIECES 3 INCH OD X 6 INCH LONG GREY VERY NICE MATERIAL TO WORK WITH

DELRIN NEW 2 PIECES 3 INCH OD X 6 INCH LONG GREY VERY NICE MATERIAL TO WORK WITH

  • Fayetteville, Georgia, United States
  • May 26th
DELRIN ACYTEL 3 INCH OD X 11 5/8 INCH LONG NEW GREY 2 PIECES NICE MATERIAL

DELRIN ACYTEL 3 INCH OD X 11 5/8 INCH LONG NEW GREY 2 PIECES NICE MATERIAL

  • Fayetteville, Georgia, United States
  • May 26th
Acetron GP POM acetal rod stock ( 3/4 in ), .750" x 12", 1 pc

Acetron GP POM acetal rod stock ( 3/4 in ), .750" x 12", 1 pc

  • Melbourne, Florida, United States
  • May 26th
Black Delrin (Acetal) block

Black Delrin (Acetal) block

  • Fayetteville, Pennsylvania, United States
  • May 26th
DELRIN SOLID RODS 3/8 INCH O.D. - 4 PIECES 12 INCHES LONG - ACETAL BLACK

DELRIN SOLID RODS 3/8 INCH O.D. - 4 PIECES 12 INCHES LONG - ACETAL BLACK

  • Edmonds, Washington, United States
  • May 26th
NATURAL Acetal Copolymer Rod Bar 3" (DELRIN) x 3 FT 36" US Seller FREE ship!

NATURAL Acetal Copolymer Rod Bar 3" (DELRIN) x 3 FT 36" US Seller FREE ship!

  • Libertyville, Illinois, United States
  • May 26th
Acetal - Delrin White 1 1/2" x 5 3/8" x 8 3/8"

Acetal - Delrin White 1 1/2" x 5 3/8" x 8 3/8"

  • Kinston, North Carolina, United States
  • May 26th
1.25"x6"x12" delrin/acetal white cnc millstock plastic

1.25"x6"x12" delrin/acetal white cnc millstock plastic

  • Memphis Tn, United States
  • May 26th
Nylon 6/6 Rectangular Bar, Opaque Off-White, Standard Tolerance, ASTM D5989,

Nylon 6/6 Rectangular Bar, Opaque Off-White, Standard Tolerance, ASTM D5989,

  • USA, United States
  • May 26th

People who viewed this item also vieved

2pcs Clear Acrylic Plexiglass sheet sized at 5,1/8" x 5,1/8" x 1/4"

2pcs Clear Acrylic Plexiglass sheet sized at 5,1/8" x 5,1/8" x 1/4"

  • Wilmette, Illinois, United States
  • Mar 25th
clear acrylic rod 2"dia. x 12"

clear acrylic rod 2"dia. x 12"

  • Harrisburg, Pennsylvania, United States
  • Mar 25th
Clear Polycarbonate Lexan

Clear Polycarbonate Lexan

  • Cleveland, Ohio, United States
  • Mar 25th
BLACK ACRYLIC PLEXIGLASS PLASTIC SHEET 1/8" X 12 x 24

BLACK ACRYLIC PLEXIGLASS PLASTIC SHEET 1/8" X 12 x 24

  • Ocala, Florida, United States
  • Mar 25th
SILICONE RUBBER SHEET 1/8 THK X 36"WIDE x36" LONG

SILICONE RUBBER SHEET 1/8 THK X 36"WIDE x36" LONG

  • Dallas, Texas, United States
  • Mar 25th
SILICONE RUBBER SHEET 0.022" 56mm Thick clear carrier layer 12" X 8" HIGH TEMP

SILICONE RUBBER SHEET 0.022" 56mm Thick clear carrier layer 12" X 8" HIGH TEMP

  • Minneapolis, Minnesota, United States
  • Mar 25th
3 PCS Orange Rubber Sheet Laser Engraver Engraving Sealer Stamp A4 2.3mm Unused

3 PCS Orange Rubber Sheet Laser Engraver Engraving Sealer Stamp A4 2.3mm Unused

  • CN, China
  • Mar 25th
1pcs ACETAL POM Plastic Polyoxymethylene Plate Sheet 6mmx100mmx100mm Black #B51

1pcs ACETAL POM Plastic Polyoxymethylene Plate Sheet 6mmx100mmx100mm Black #B51

  • ???, ???, China
  • Mar 25th
FORTUNA BANDKNIFE SPLITTER MODEL: NAF 470-R RUBBER SPLITTING MACHINE OR LEATHER

FORTUNA BANDKNIFE SPLITTER MODEL: NAF 470-R RUBBER SPLITTING MACHINE OR LEATHER

  • Texas City, Texas, United States
  • Mar 25th
Natural Nylon Sheet 1" x 11.5" x 11.5"

Natural Nylon Sheet 1" x 11.5" x 11.5"

  • Harrisburg, Pennsylvania, United States
  • Mar 26th
Ultem 2300

Ultem 2300

  • Marlborough, Massachusetts, United States
  • Mar 26th
20Pcs Stainless Steel Round Shaft Rod Axles 150mmx2mm for RC Toy Car

20Pcs Stainless Steel Round Shaft Rod Axles 150mmx2mm for RC Toy Car

  • United States
  • Mar 26th
McElroy No 14 Pit Bull Pipe Fusion Fusing Machine HDPE Poly Welder

McElroy No 14 Pit Bull Pipe Fusion Fusing Machine HDPE Poly Welder

  • United States
  • Jun 3rd
McElroy 2LC Pipe Fusion Fusing Machine HDPE Poly Welder

McElroy 2LC Pipe Fusion Fusing Machine HDPE Poly Welder

  • United States
  • Jun 3rd
HDPE marine grade sheet black 12" x 12" x 3.5"

HDPE marine grade sheet black 12" x 12" x 3.5"

  • Vienna, Virginia, United States
  • Jun 3rd
Polyethylene White Plastic Discs 2-1/2" Dia.x 1/8" Thick

Polyethylene White Plastic Discs 2-1/2" Dia.x 1/8" Thick

  • San Leandro, California, United States
  • Jun 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies