3/16 Inch Radius Decorative Edge Diamond Profiler/router Bit, Granite, Stone +

US $3400

El Cajon, California, United States
Jun 15th

Open on mobile:
QR code

~ This Listing Provides A: 3/16 radius diamond profile wheel. 3/16 inch radius shaping and polishing profile tool used to produce a 3/16 inch radius decorative edge on tile, granite and concrete counter tops and other natural stone and hard surfaces. 1, B5 (5mm / 3/16" Radius / Demi / Half Bullnose Diamond Brazed Router Bit/Profile) 5/8"-11 Thread arbor. Grinder/polisher Speed - 3500-4500 RPM. Water feed hole, can be wet use. FOR A SHORT TIME - "JUST DISCOUNTED TO $39.90" - FROM $54.90 This SECCO 3/16" Profile Granite Counters Wet Polisher, Grinder, Wet Marble Polisher Polishing Kit w/Diamond Pads - Usually Sales For $189.90 To $332.00 +, If You Purchase It Through A Retailer Store Outlet. Description a 3/16 inch radius vacuum brazed diamond profile wheel. This vacuum brazed profile wheel is designed to produce a rounded-over 3/16 inch look on natural or engineered stone and concrete. Very simple to use, the profile wheel screws directly onto the spindle of your polisher. A guide on the top of the bit rides on the surface of the stone and a lower bearing controls the depth of cut for consistent shaping. The profile wheel is only capable of removing material in the controlled 3/16 inch area, this makes user error or damaging the material virtually impossible. To use the system simply screw the bit on to the grinder. Make sure your water lines and connections are properly attached and turn on the water at a slow flow. You just need enough water coming through the system to keep the dust down. Sit the profile wheel atop the edge of the material being worked on and apply some force parallel (lengthwise) to the edge of the work surface. Move the bit forward and back until the bit has ground the shape completely. It's that simple! Our profile wheels feature an internal water feed for optimum cooling of the bit. This allows for maximum linear grinding distance. After you shape the edge take your profile wheel off and start the polishing process with the 50 grit pad. The idea is to completely remove the coarse scratch pattern left behind by the profile wheel and give it a less coarse 50 grit scratch pattern. Then on to the 100 grit. Continue polishing with each grit ending with the 3,000 grit polishing pad and a nice factory shine can be achieved. Contents of this package include the following: 3/16 inch Radius Vacuum Brazed Diamond Profile Wheel <>