+ Post new Ad
3/4" Garr 80487 Carbide TialN 4 Flute .060 CR End Mill (O 924), US $130 – Picture 0
3/4" Garr 80487 Carbide TialN 4 Flute .060 CR End Mill (O 924), US $130 – Picture 0

3/4" Garr 80487 Carbide Tialn 4 Flute .060 Cr End Mill (o 924)

US $130

  • Dallas, Texas, United States
  • Jun 9th
Open on mobile:
QR code
Manufacturer Refurbhished (Recoated/Resharp)  Garr (Lot of 1) Series 230RA EDP# 80487 3/4" EM .060" CR 4FL *TiALN* For stronger corners and part radius For stronger corners and part radius Up to 40% faster than uncoated Dry or semi-dry machining Radius tolerance +.001"-.001" (+.025-.025mm) TOLERANCES flute dia. +.000-.002 3mm - 6mm shank dia. +.0000-.0003" (-0.0000-0.0075mm) 1/4" - 1" shank dia. -.0001-.0004" (-0.0025-0.0100mm) Edp # Flutes Flute Dia. Flute Length Shank Dia. Neck Dia. 80487 4 0.75 1.5 0.75 0.0 Overall Length Reach Length (l.b.s.) Neck Length Behind Flutes Corner Radius End Type Flat? Weight (lbs) 4.0 0.0 0.0 0.06 RAD N  (diameters vary slightly due to refurbishing) SATISFACTION GUARANTEED Save BIG with Combined Shipping Checkout My Other Items!  TX Residents must pay 8.25% Sales Tax  

Directions

Similar products from End Mills Router & Drill Bits

7/16" US22 Solid Carbide 90 Degree ALtIN Coated 4 Flute Drill Mill (O 942)

7/16" US22 Solid Carbide 90 Degree ALtIN Coated 4 Flute Drill Mill (O 942)

  • Dallas, Texas, United States
  • Jun 9th
3/8" US22 Solid Carbide 90 Degree ALtIN Coated 4 Flute Drill Mill (O 943)

3/8" US22 Solid Carbide 90 Degree ALtIN Coated 4 Flute Drill Mill (O 943)

  • Dallas, Texas, United States
  • Jun 9th
(QTY 4) HTC Garr 5/8" Carbide TiALN 4FL Fine Roughing Rougher End Mill B 123

(QTY 4) HTC Garr 5/8" Carbide TiALN 4FL Fine Roughing Rougher End Mill B 123

  • Dallas, Texas, United States
  • Jun 9th
3/4" Garr 80507 Carbide TialN 4 Flute .125 CR End Mill (O 921)

3/4" Garr 80507 Carbide TialN 4 Flute .125 CR End Mill (O 921)

  • Dallas, Texas, United States
  • Jun 9th
Endmill HSS SC406 4F SE 30 Degree RH SQUARE UNC 7/16x3/8x1 EDP#41141

Endmill HSS SC406 4F SE 30 Degree RH SQUARE UNC 7/16x3/8x1 EDP#41141

  • Cedar Rapids, Iowa, United States
  • Jun 9th
3/4" Garr 80507 Carbide TialN 4 Flute .090 CR End Mill (O 922)

3/4" Garr 80507 Carbide TialN 4 Flute .090 CR End Mill (O 922)

  • Dallas, Texas, United States
  • Jun 9th
3 - 1 1/4" shank end mills

3 - 1 1/4" shank end mills

  • Suring, Wisconsin, United States
  • Jun 9th
DORMER WOODRUFF CUTTER 1 1/2" X 1/4" X 1/2" SHAFT

DORMER WOODRUFF CUTTER 1 1/2" X 1/4" X 1/2" SHAFT

  • Surrey, British Columbia, Canada
  • Jun 9th
Concave Radius End Mill 1/4" Radius, cutter DIA 3/4"

Concave Radius End Mill 1/4" Radius, cutter DIA 3/4"

  • Westfield, Massachusetts, United States
  • Jun 9th
3/4" Garr 80467 Carbide TialN 4 Flute .030 CR End Mill (O 925)

3/4" Garr 80467 Carbide TialN 4 Flute .030 CR End Mill (O 925)

  • Dallas, Texas, United States
  • Jun 9th
(QTY 4) Garr HOG 1/2" 49760 Carbide TiALN 4FL Roughing Rougher End Mill (B 93)

(QTY 4) Garr HOG 1/2" 49760 Carbide TiALN 4FL Roughing Rougher End Mill (B 93)

  • Dallas, Texas, United States
  • Jun 9th
1/2" Garr 80307 Carbide 4 Flute TiALN .015CR End Mill (O 926)

1/2" Garr 80307 Carbide 4 Flute TiALN .015CR End Mill (O 926)

  • Dallas, Texas, United States
  • Jun 9th
DORMER WOODRUFF CUTTER 1 1/2" X 5/16" X 1/2" SHAFT

DORMER WOODRUFF CUTTER 1 1/2" X 5/16" X 1/2" SHAFT

  • Surrey, British Columbia, Canada
  • Jun 9th
(Lot of 4) 3/4" HTC Varimill Carbide TialN 4 Flute .020 CR End Mill (B 96)

(Lot of 4) 3/4" HTC Varimill Carbide TialN 4 Flute .020 CR End Mill (B 96)

  • Dallas, Texas, United States
  • Jun 9th
Lot of (2) Brubaker 1/8 x 3/16 Shank Carbide Endmill 2 Flute =NOS=

Lot of (2) Brubaker 1/8 x 3/16 Shank Carbide Endmill 2 Flute =NOS=

  • Compton, California, United States
  • Jun 9th
DORMER WOODRUFF CUTTER 1 1/2" X 3/8" X 1/2" SHAFT

DORMER WOODRUFF CUTTER 1 1/2" X 3/8" X 1/2" SHAFT

  • Surrey, British Columbia, Canada
  • Jun 9th
Set of 3 carbide 2 flute1/8", 3/16 ball end mills and 7/32 straight

Set of 3 carbide 2 flute1/8", 3/16 ball end mills and 7/32 straight

  • Indianapolis, Indiana, United States
  • Jun 9th
Niagara profile cutter

Niagara profile cutter

  • Whitehall, Michigan, United States
  • Jun 9th
5/8" Garr 80427 Carbide 4 Flute TiALN .090 CR End Mill (O 931)

5/8" Garr 80427 Carbide 4 Flute TiALN .090 CR End Mill (O 931)

  • Dallas, Texas, United States
  • Jun 9th
Lot of (6) Guhring 1/2" Cobalt End Mill - p/n: 52764-1

Lot of (6) Guhring 1/2" Cobalt End Mill - p/n: 52764-1

  • Compton, California, United States
  • Jun 9th

People who viewed this item also vieved

12 MM D-1 KEYWAY BROACH DUMONT MINUTEMAN USA

12 MM D-1 KEYWAY BROACH DUMONT MINUTEMAN USA

  • East Brunswick, New Jersey, United States
  • Jan 30th
7/16 D KEYWAY BROACH DUMONT MINUTEMAN USA

7/16 D KEYWAY BROACH DUMONT MINUTEMAN USA

  • East Brunswick, New Jersey, United States
  • Jan 30th
CNMG 643-GN IC3028 ISCAR Insert

CNMG 643-GN IC3028 ISCAR Insert

  • Windsor, Connecticut, United States
  • Jan 30th
ISCAR DNMG 332-VL IC908

ISCAR DNMG 332-VL IC908

  • Dugo Selo, Zagreb, Croatia, Republic of
  • Jan 30th
CNMA432 KC9315 KENNAMETAL Indexable Turning Insert

CNMA432 KC9315 KENNAMETAL Indexable Turning Insert

  • Johnson City, Tennessee, United States
  • Jan 30th
CNMX453T0820 KY3500 KENNAMETAL CERAMIC TURNING INSERTS

CNMX453T0820 KY3500 KENNAMETAL CERAMIC TURNING INSERTS

  • Johnson City, Tennessee, United States
  • Jan 30th
Brown & Sharpe + Generic -2 Milling Cutters [.5" X 5" X 1.25"]&[1/16" X 6 X 1"]

Brown & Sharpe + Generic -2 Milling Cutters [.5" X 5" X 1.25"]&[1/16" X 6 X 1"]

  • Plano, Texas, United States
  • Jan 30th
Brown & Sharpe -Milling Cutter 1/2" X 6" X 1.25" "WR3" #MFG #MANUFACTURING #CNC

Brown & Sharpe -Milling Cutter 1/2" X 6" X 1.25" "WR3" #MFG #MANUFACTURING #CNC

  • Plano, Texas, United States
  • Jan 30th
ONE USED 1/4" NUMBERS 1 - 9 PUNCH SET.

ONE USED 1/4" NUMBERS 1 - 9 PUNCH SET.

  • Epping, New Hampshire, United States
  • Jan 30th
VTG Starrett Drive Pin Punch Set of 8 w/ Case

VTG Starrett Drive Pin Punch Set of 8 w/ Case

  • Noblesville, Indiana, United States
  • Jan 30th
Cle-Line C20999, Size 3, HSS, Straight Shank, Flute Taper Pin Reamer

Cle-Line C20999, Size 3, HSS, Straight Shank, Flute Taper Pin Reamer

  • Chillicothe, Missouri, United States
  • Jan 30th
ANTIQUE QUICK SET ADJUSTABLE BLADE REAMERS

ANTIQUE QUICK SET ADJUSTABLE BLADE REAMERS

  • San Ardo, California, United States
  • Jan 30th
SM-BL-07-5 Steelmax 7 1/4" TCT Blade for Mild Steel

SM-BL-07-5 Steelmax 7 1/4" TCT Blade for Mild Steel

  • Niagara, Wisconsin, United States
  • Jan 30th
Dolfa 5-748-258 Metal Slitting Saw With Side Chip Clearance - 3" X 3/32" X 1"

Dolfa 5-748-258 Metal Slitting Saw With Side Chip Clearance - 3" X 3/32" X 1"

  • Coarsegold, California, United States
  • Jan 30th
Hertel 1" Center Cutting Bit 2 Flute CNC Milling Carbide Bit HAA75032L

Hertel 1" Center Cutting Bit 2 Flute CNC Milling Carbide Bit HAA75032L

  • Corry, Pennsylvania, United States
  • Jan 30th
WELDON DEBURRING TOOLS

WELDON DEBURRING TOOLS

  • Randolph, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies