3.7v 18650 Lithium Battery Ups Voltage Converter Dc 12v Charging Booster Module

US $150

ShenZhen, China
Jul 31st

Open on mobile:
QR code

Home Electronic Component Chips Sensor Arduino Module Raspberry Pi 3.7V 18650 Lithium Battery UPS Voltage Converter DC 12V Charging Booster Module Popular Popular Product Introduction 1.Description: It is a UPS uninterruptible power supply control board. 2.Features: 1>.Support charging and discharging at the same time 2>.Large current 3>.Small size 4>.High efficiency 5>.Support short circuit protection 3.Parameters: 1>.Product Name:UPS Voltage Converter Module 2>.Working Voltage:DC 5.0V-12.0V 3>.Output Voltage:DC 12.0V 4>.Output Power:12W 5>.Support Battery(No include!):3.7V Lithium or polymer battery 15Ah(Max) 6>.Working Temperature range:-40~85 7>.Working Humidity range:0%-95%RH 8>.Size:50*20*6.3mm 4.Using Steps: 1>.Connect right input voltage at input terminal. 2>.Check output voltage by voltmeter and ammeter. 3>.Connect battery at B+ and B-. 5.Note: 1>.Its max output current is 1A and can not keep output 1A. 2>.The positive and negative poles of the input power supply cannot be reversed Otherwise the module will be damaged. 3>.Users can install a common anode Red-Blue LED by yourself as charging indicators.Blue light indicates whether there is a loa at output.Keep Red is charging.There is no battery if Red flashing.Red OFF if charged. 4>.Due to the large current, it is recommended to use a thicker wire.Wire cross-section greater than 1.5 square millimeters. 5>.Please read use manual and description before use. 6.Application: 1>.Ordinary power supply; 2>.Battery charger; 3>.Mobile power; 4>.Power conversion; 5>.Infrared alarm; 6>.Network equipment such as switches; 7>.Router; 8>.Battery car modification 7.Package: 1>.1pcs UPS Voltage Converter Module Payment Shipping Refund Payment We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right. Payment must be received in 5 business days of auction closing. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. Shipping We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Refund All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund. If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item. Home Electronic Component Chips Sensor Arduino Module Raspberry Pi 3.7V 18650 Lithium Battery UPS Voltage Converter DC 12V Charging Booster Module Product Introduction 1.Description: It is a UPS uninterruptible power supply control board. 2.Features: 1>.Support charging and discharging at the same time 2>.Large current 3>.Small size 4>.High efficiency 5>.Support short circuit protection 3.Parameters: 1>.Product Name:UPS Voltage Converter Module 2>.Working Voltage:DC 5.0V-12.0V 3>.Output Voltage:DC 12.0V 4>.Output Power:12W 5>.Support Battery(No include!):3.7V Lithium or polymer battery 15Ah(Max) 6>.Working Temperature range:-40~85 7>.Working Humidity range:0%-95%RH 8>.Size:50*20*6.3mm 4.Using Steps: 1>.Connect right input voltage at input terminal. 2>.Check output voltage by voltmeter and ammeter. 3>.Connect battery at B+ and B-. 5.Note: 1>.Its max output current is 1A and can not keep output 1A. 2>.The positive and negative poles of the input power supply cannot be reversed Otherwise the module will be damaged. 3>.Users can install a common anode Red-Blue LED by yourself as charging indicators.Blue light indicates whether there is a load at output.Keep Red is charging.There is no battery if Red flashing.Red OFF if charged. 4>.Due to the large current, it is recommended to use a thicker wire.Wire cross-section greater than 1.5 square millimeters. 5>.Please read use manual and description before use. 6.Application: 1>.Ordinary power supply; 2>.Battery charger; 3>.Mobile power; 4>.Power conversion; 5>.Infrared alarm; 6>.Network equipment such as switches; 7>.Router; 8>.Battery car modification 7.Package: 1>.1pcs UPS Voltage Converter Module Payment Shipping Refund Payment We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right. Payment must be received in 5 business days of auction closing. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. Shipping We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Refund All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund. If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it. If is item is defective in 12 months, you can reurn it to us. We will send you a new replacement after receiving the defective item.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded
Anzahl der Einheiten	1pc
Type	5-12V to 12V
Herstellernummer	nicht zutreffend
MPN	Does not apply
Herstellungsland und -region	China
Select Type	5-12V to 12V
Marke	Markenlos
UPC	Does not apply
Maeinheit	Einheit
EAN	Does not apply
Produktart	UPS Voltage Converter Module/span>
Output Voltage	DC 12.0V
Output Power	12W
Working voltage	DC 5.0V-12.0V
ISBN	Does not apply