+ Post new Ad
3/8" ROUNDOVER ROUTER BIT 1/4" SHANK C3 CARBIDE WITH BEARING NEW!, US $7.25 – Picture 0
3/8" ROUNDOVER ROUTER BIT 1/4" SHANK C3 CARBIDE WITH BEARING NEW!, US $7.25 – Picture 0

3/8" Roundover Router Bit 1/4" Shank C3 Carbide With Bearing New!

US $7.25

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
Open on mobile:
QR code
Brand new, never used 3/8" roundover bit with 1/4" shank.  Fits all 1/2" shank routers with a simple adapter usually included in with the router itself.  C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.  Harder C4 carbides wear somewhat more slowly, but are also more brittle, meaning they are more likely to chip in an encounter with an unseen nail or embedded rock.  Softer C1 and C2 Carbides wear more quickly, but are likewise the most resistant to shock damage.  All Carbide wear at a rate at least 10x slower than their high speed steel equivalents.   -Shank and body steel heat treated for stability -Low kickback design -Max RPM: 27500 Please don't hesitate to contact me with any questions. As always, the items I sell on eBay are items that I use, and that I find to be of particular value. These router bits are no exception!  They are the only 1/4" shank bits i use, and they stand up to the highest priced name brand equivalents with absolutely no downside.  Opposite the case of circular and chainsaw blades with flat tips intended only to cut a line, many router bits have detailed cutting edges with critical clearance sizes that cut perfectly only when the edge is virgin.  Additionally, most of us don't have the capacity to machine sharpen curved edges common to all but straight bits, so the carbide tip ends up being wasted when we toss old bits to buy new ones.  These bits last as long as any others I have ever used.  If intended for occasional use, they should pretty much last forever, and again, if you beat your bits and dull them frequently, I dare anyone to find a way to restore the carbide edge for less than the cost of a shiny new one of these... Use them like disposable HSS bits, but enjoy the 10x longer life!      Items I sell as new are always new and unused, but I reserve the right to re-parcel items packaged and sold in bulk, or occasionally to remove factory packaging in light of shipping cost and efficiency.  In the even that an original package is removed from an item, I try to be sure all relevant bar codes and UPC's are included as well as all items and paperwork packaged.   Please don't hesitate to contact me with any questions before or after sale.   Thanks for viewing!

Directions

Similar products from Router Bits & Sets

3.5 bore 1-3/8 ct 6.75 dia carbide tipped 349b Shaper cutter nice table ogee cut

3.5 bore 1-3/8 ct 6.75 dia carbide tipped 349b Shaper cutter nice table ogee cut

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 5/16 ct 6-5/8 dia carbide tipped 350 Shaper cutter flush rabbet dado

3.5 bore 5/16 ct 6-5/8 dia carbide tipped 350 Shaper cutter flush rabbet dado

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 1/2 ct 5-3/8 dia carbide tipped 351 Shaper cutter rabbet dado reached

3.5 bore 1/2 ct 5-3/8 dia carbide tipped 351 Shaper cutter rabbet dado reached

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 3/8 ct 6.5 dia carbide tipped 353 Shaper cutter rabbet dado groove good

3.5 bore 3/8 ct 6.5 dia carbide tipped 353 Shaper cutter rabbet dado groove good

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 9/16 ct 6 dia carbide tipped 354 Shaper cutter rabbet dado groove flush

3.5 bore 9/16 ct 6 dia carbide tipped 354 Shaper cutter rabbet dado groove flush

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 5/16 ct 6.5 dia carbide tipped 355 Shaper cutter rabbet dado flush

3.5 bore 5/16 ct 6.5 dia carbide tipped 355 Shaper cutter rabbet dado flush

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 5/16 ct 6.25 dia carbide tipped 356 Shaper cutter rabbet dado needs wrk

3.5 bore 5/16 ct 6.25 dia carbide tipped 356 Shaper cutter rabbet dado needs wrk

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 3/8 ct 7.25 dia carbide tipped 357 Shaper cutter rabbet dado looks good

3.5 bore 3/8 ct 7.25 dia carbide tipped 357 Shaper cutter rabbet dado looks good

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 3/32 ct 7 dia carbide tipped 358 Shaper cutter rabbet dado looks good

3.5 bore 3/32 ct 7 dia carbide tipped 358 Shaper cutter rabbet dado looks good

  • Greenville, South Carolina, United States
  • Jan 30th
1-1/4 bore 1.5 cut 6 dia carbide tipped 371 Shaper cutter Corner bead round over

1-1/4 bore 1.5 cut 6 dia carbide tipped 371 Shaper cutter Corner bead round over

  • Greenville, South Carolina, United States
  • Jan 30th
1/4" ROUNDOVER ROUTER BIT 1/4" SHANK C3 CARBIDE TIP WITH BEARING WOODWORK. NEW!

1/4" ROUNDOVER ROUTER BIT 1/4" SHANK C3 CARBIDE TIP WITH BEARING WOODWORK. NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/4" RABBETING ROUTER BIT 1/4" SHANK C3 CARBIDE TIP WITH BEARING WOODWORK NEW!

1/4" RABBETING ROUTER BIT 1/4" SHANK C3 CARBIDE TIP WITH BEARING WOODWORK NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/4" COVE CUT ROUTER BIT 1/4" SHANK C3 CARBIDE TIP WITH BEARING WOODWORK. NEW!

1/4" COVE CUT ROUTER BIT 1/4" SHANK C3 CARBIDE TIP WITH BEARING WOODWORK. NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
5/32" ROMAN OGEE ROUTER BIT FOR EDGE DETAILING 1/4" SHANK C3 CARBIDE TIP. NEW!

5/32" ROMAN OGEE ROUTER BIT FOR EDGE DETAILING 1/4" SHANK C3 CARBIDE TIP. NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1/2" 90 DEGREE V-GROOVE ROUTER BIT 1/4" SHANK C3 CARBIDE TIP FOR SIGN LETTER+

1/2" 90 DEGREE V-GROOVE ROUTER BIT 1/4" SHANK C3 CARBIDE TIP FOR SIGN LETTER+

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
1-1/4 bore 1.5 cut 6-3/8d carbide tipped 372 Shaper cutter Round over table edge

1-1/4 bore 1.5 cut 6-3/8d carbide tipped 372 Shaper cutter Round over table edge

  • Greenville, South Carolina, United States
  • Jan 30th
3/8" DOVETAIL ROUTER BIT FOR FINISH JOINERY 1/4" SHANK C3 CARBIDE TIP. NEW!

3/8" DOVETAIL ROUTER BIT FOR FINISH JOINERY 1/4" SHANK C3 CARBIDE TIP. NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
Router Bits for wood Lot of 12 Pcs.

Router Bits for wood Lot of 12 Pcs.

  • Coventry, Rhode Island, United States
  • Jan 30th
1/2" STRAIGHT ROUTER BIT 1/4" SHANK C3 CARBIDE TIP FOR DADO JOINT WOODWORK NEW!

1/2" STRAIGHT ROUTER BIT 1/4" SHANK C3 CARBIDE TIP FOR DADO JOINT WOODWORK NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
3/4" STRAIGHT ROUTER BIT 1/4" SHANK C3 CARBIDE TIP FOR DADO JOINT WOODWORK NEW!

3/4" STRAIGHT ROUTER BIT 1/4" SHANK C3 CARBIDE TIP FOR DADO JOINT WOODWORK NEW!

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

DoAll 3613-20 Band Saw Owners Service Manual Parts Lists Schematics etc.

DoAll 3613-20 Band Saw Owners Service Manual Parts Lists Schematics etc.

  • Naperville, Illinois, United States
  • Jun 12th
Foley Belsaw 325 Scissor Sharpener

Foley Belsaw 325 Scissor Sharpener

  • Port Saint Lucie, Florida, United States
  • Jun 12th
Foley Belsaw 310 Knife Fixture

Foley Belsaw 310 Knife Fixture

  • Port Saint Lucie, Florida, United States
  • Jun 12th
Bessey TG4.024 0-24" Light Duty Malleable Cast Bar Clamp Set of 4

Bessey TG4.024 0-24" Light Duty Malleable Cast Bar Clamp Set of 4

  • Decorah, Iowa, United States
  • May 28th
30mm Magswitch Magnetic Jig

30mm Magswitch Magnetic Jig

  • Decorah, Iowa, United States
  • May 28th
PowerTec 20308 Hook Type of J Hook Toggle Clamp, 375 lbs Capacity Number-351

PowerTec 20308 Hook Type of J Hook Toggle Clamp, 375 lbs Capacity Number-351

  • USA, United States
  • May 29th
Red Oak wood veneer 4" x 14" on paper backer "A" grade quality 1/40th" thickness

Red Oak wood veneer 4" x 14" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 3rd
Cherry wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

Cherry wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 3rd
Walnut wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

Walnut wood veneer 24" x 24" on paper backer "A" grade quality 1/40th" thickness

  • Louisville, Kentucky, United States
  • Jun 3rd
HIGH SPEED STEEL PLANER KNIVES 12 x 1 x 1/8 GRIZZLY & CRAFTSMAN 12" PLANER

HIGH SPEED STEEL PLANER KNIVES 12 x 1 x 1/8 GRIZZLY & CRAFTSMAN 12" PLANER

  • Oregon City, Oregon, United States
  • Jun 4th
HSS PLANER KNIVES 20 X 1-3/16 X 1/8 GRIZZLY H7269, DELTA 4 KNIFE SET NEW

HSS PLANER KNIVES 20 X 1-3/16 X 1/8 GRIZZLY H7269, DELTA 4 KNIFE SET NEW

  • Oregon City, Oregon, United States
  • Jun 4th
HSS PLANER KNIVES 24-1/8 X 1-3/16 X 1/8 GRIZZLY G6705 NEW 4 KNIFE SET

HSS PLANER KNIVES 24-1/8 X 1-3/16 X 1/8 GRIZZLY G6705 NEW 4 KNIFE SET

  • Oregon City, Oregon, United States
  • Jun 4th
Rubber Mandrels for SSM15 1.5 x 2 inch lenght sleeves 1/4 inch shaft

Rubber Mandrels for SSM15 1.5 x 2 inch lenght sleeves 1/4 inch shaft

  • Iron River, Michigan, United States
  • Jun 5th
Eye Cutter (Large Taper) 18EC38G 3/8 inch 3/4 inch 1/8th inch shaft

Eye Cutter (Large Taper) 18EC38G 3/8 inch 3/4 inch 1/8th inch shaft

  • Iron River, Michigan, United States
  • Jun 5th
Cylinder 18C18SEG 1/8 inch 7/8 inch 1/8th inch shaft smooth end

Cylinder 18C18SEG 1/8 inch 7/8 inch 1/8th inch shaft smooth end

  • Iron River, Michigan, United States
  • Jun 5th
TELEMECHANIQUE XCK-M,ZCK-M1,ZCK-D10. SWITCH ASSEMBLY

TELEMECHANIQUE XCK-M,ZCK-M1,ZCK-D10. SWITCH ASSEMBLY

  • Saskatoon, Saskatchewan, Canada
  • Jun 12th
HiPUR FORMER Polyurethane Advance Bonding System Adhesive Hot Melt Instructions

HiPUR FORMER Polyurethane Advance Bonding System Adhesive Hot Melt Instructions

  • Sullivan, Ohio, United States
  • Jun 12th
ShopSmith Badge / ID Plate 4"

ShopSmith Badge / ID Plate 4"

  • Victor, Montana, United States
  • Jun 12th
Makita D-00832-25 3/16-by-6-1/4-Inch Standard SDS Bit, 25-Pack

Makita D-00832-25 3/16-by-6-1/4-Inch Standard SDS Bit, 25-Pack

  • Jacksonville, Florida, United States
  • Jun 14th
Hickory Woodworking 16 Piece Kit

Hickory Woodworking 16 Piece Kit

  • Sacramento, California, United States
  • Jun 14th
Union Butterfield #4210214, 1-14" X 14" HSS #4 Morse Tapper USA NEW!!!

Union Butterfield #4210214, 1-14" X 14" HSS #4 Morse Tapper USA NEW!!!

  • Mokena, Illinois, United States
  • Jun 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies