3 Axis Cnc Router Stepper Motor Driver Kit 2.8a Nema 23 56x56x57mm Motor 24v Psu

US $160

Los Angeles, United States
Jun 9th

Open on mobile:
QR code

The product allows for power output to be set according to the user requirement with the on-board current switching and the full closed-type optical isolation, which protects the user's computer and equipment. The relay spindle interface outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!), and the 4-channel inputs interface can be used for XYZ limit and emergency stop. The product is suitable for unipolar or bipolar stepper motors, and voltage-regulated spindle speed controlled by parallel interface as You don't need a separate power source for the stepper motor as it directly gets the power from the stepper driver. Voltage selection follows a pattern of a 12-16V DC power supply for NEMA 17 stepper motors, 16-24V DC power supply for NEMA 23 stepper motors, and 24-36V DC power supply for NEMA 34 stepper motors (high voltage will burn up the chips or stepper motors!!!). The output current of the power supply can be calculated by the expression: Output current = Rated current of your stepper motors * quantity + 2A. The 3 Axis CNC Router Stepper Motor Driver Kit includes a 2.8A NEMA 23 56x56x57mm motor and a 24V PSU for your personal digital equipment. At SAVEBASE, we prioritize customer satisfaction by providing top-quality and affordable accessories and parallel devices. Enjoy a hassle-free shopping experience with us; visit SAVEBASE.com for more information. The bipolar constant current chopper drive with non-resonant region controls motors smoothly through the range without creep effect. The product has four-input control that allows setting the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment. The universal architecture supports most parallel software MACH3, KCAM4, etc. Contact us for compatibility with other software. The product features a Toshiba TB6560AHQ chip that can deliver a maximum drive current of 3.5A. Its 1-1/16 microstep setting provides higher accuracy and smoother operation than standard 1, 1/2 steps. Adjust the 1.5A-3A drive current settings for each axis and set 25%,50%,75%,100% of full current for different stepper motors. The product also has overload, over-current, and over-temperature safety, with full protection for your computer and peripheral equipment.