+ Post new Ad
3” Inch Round Bench Block Staking Anvil Block Toolmaker Hammer Riveting Hardened, C $37.99 – Picture 0
3” Inch Round Bench Block Staking Anvil Block Toolmaker Hammer Riveting Hardened, C $37.99 – Picture 0

3” Inch Round Bench Block Staking Anvil Block Toolmaker Hammer Riveting Hardened

C $37.99

  • DELHI, DELHI, India
  • Aug 25th
Open on mobile:
QR code
TOOLMAKER'S BENCH BLOCK 3" DIAMETER OF HOLES 1/8" to 5/8" DESCRIPTION  Bench Block Diameter.:  3" (75mm) Bench Block Height  : 1-1/2" (38mm) Hole Diameter.: 1/8” To 5/8” (3-16mm) Hardened and ground. Block is 38mm (1 ") high. Holes vary in sizes from 1/8" to 5/8" Bench Block 3" (75mm) inch diameter. Very handy for holding work when driving pins, drilling, etc. V-groove across face accommodates round & odd shaped stock A versatile steel block that comes in handy when riveting, staking, tapping, pin punching, etc. Surface is ground flat and has 7 holes ranging in diameter from 1/8" to 5/8". V-groove in the surface supports round stock. Measures 3" (75mm) in diameter 1-1/2" (38mm) high.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand RUTWIK ENGINEERS
Shape Round
MPN Does Not Apply
UPC Does not apply

Directions

Similar products from Measuring Gage Blocks

GENERAL HARDWARE NO. 116 V-BLOCKS , WITH CLAMP

GENERAL HARDWARE NO. 116 V-BLOCKS , WITH CLAMP

  • Fenton, Michigan, United States
  • Aug 27th
LARGE LOT OF ASSORTED SQUARE GAGE BLOCKS & ACCESSORIES WEBBER MITUTOYO

LARGE LOT OF ASSORTED SQUARE GAGE BLOCKS & ACCESSORIES WEBBER MITUTOYO

  • Ellington, New York, United States
  • Aug 27th
PARTIAL SET OF SQUARE GAGE BLOCKS CEJ MITUTOYO CMI .050" TO 4"

PARTIAL SET OF SQUARE GAGE BLOCKS CEJ MITUTOYO CMI .050" TO 4"

  • Ellington, New York, United States
  • Aug 27th
Mitutoyo 611201-541 Gage Block,Rect,Steel,1.00 In,Asme As-1

Mitutoyo 611201-541 Gage Block,Rect,Steel,1.00 In,Asme As-1

  • Vancouver, Washington, United States
  • Aug 26th
Starrett Webber Mini Metric Gage Block Set Steel 9 Piece in Case

Starrett Webber Mini Metric Gage Block Set Steel 9 Piece in Case

  • Theresa, Wisconsin, United States
  • Aug 26th
3” Round Bench Block Set Of 2 Pcs Staking Anvil Block Toolmakers Hammer Riveting

3” Round Bench Block Set Of 2 Pcs Staking Anvil Block Toolmakers Hammer Riveting

  • DELHI, DELHI, India
  • Aug 26th
Mitutoyo 1 inch gage block, 1.000000"

Mitutoyo 1 inch gage block, 1.000000"

  • Dayton, Ohio, United States
  • Aug 25th
LLDSIMEX Pair 1" x 2" x 3" Precision Steel 1-2-3 Blocks 23 Holes

LLDSIMEX Pair 1" x 2" x 3" Precision Steel 1-2-3 Blocks 23 Holes

  • US, United States
  • Aug 25th
"STARRETT" (1) No.567 V-BLOCK and CLAMP EDPNo, 52588

"STARRETT" (1) No.567 V-BLOCK and CLAMP EDPNo, 52588

  • Oak Creek, Wisconsin, United States
  • Aug 25th
750 Adjustable Direct Impingement Facilitation Mechanism

750 Adjustable Direct Impingement Facilitation Mechanism

  • Ochlocknee, Georgia, United States
  • Aug 25th
MATCHED PAIR ULTRA PRECISION 1-2-3 BLOCKS NO HOLES .0001" MACHINIST 123 JIG

MATCHED PAIR ULTRA PRECISION 1-2-3 BLOCKS NO HOLES .0001" MACHINIST 123 JIG

  • Chino, California, United States
  • Aug 25th
Matched Pair 1-2-3 123 Blocks Precision 0.0002" With 11 Holes

Matched Pair 1-2-3 123 Blocks Precision 0.0002" With 11 Holes

  • Chino, California, United States
  • Aug 25th
Size Control MikeMaster 1" to 6" gage rings set blocks

Size Control MikeMaster 1" to 6" gage rings set blocks

  • Anaheim, California, United States
  • Aug 25th
FOWLER MADE SWEDEN GAGE BLOCK SET .1001 - 4 "

FOWLER MADE SWEDEN GAGE BLOCK SET .1001 - 4 "

  • El Monte, California, United States
  • Aug 24th
LOT OF ANGLE DEGREE BLOCK 1 - 30 DEG

LOT OF ANGLE DEGREE BLOCK 1 - 30 DEG

  • El Monte, California, United States
  • Aug 24th
Precision Gage Block Set Pratt &Whitney/Hoke/Starrett 72 Pc’s. W/Case Vintage

Precision Gage Block Set Pratt &Whitney/Hoke/Starrett 72 Pc’s. W/Case Vintage

  • Portage, Michigan, United States
  • Aug 24th
Starrett 81 Piece Rectangular Gage Block Set, Grade 3 (Missing 7 Blocks) AS-IS

Starrett 81 Piece Rectangular Gage Block Set, Grade 3 (Missing 7 Blocks) AS-IS

  • Columbus, Ohio, United States
  • Aug 24th
MT2 Revolving Center 2MT Shank 4 Jaw Self Centering 2-1/2" 65mm Mini Lathe Chuck

MT2 Revolving Center 2MT Shank 4 Jaw Self Centering 2-1/2" 65mm Mini Lathe Chuck

  • DELHI, DELHI, India
  • Aug 24th
5 MATCHED PAIRS ULTRA PRECISION 1-2-3 BLOCKS 23 HOLES .0002" MACHINIST 123

5 MATCHED PAIRS ULTRA PRECISION 1-2-3 BLOCKS 23 HOLES .0002" MACHINIST 123

  • Monroe Township, New Jersey, United States
  • Aug 24th
New 5 Matched Pair 1-2-3 Blocks 23 Holes .0002" Machinist 123 Ultra Precision

New 5 Matched Pair 1-2-3 Blocks 23 Holes .0002" Machinist 123 Ultra Precision

  • Monroe Township, New Jersey, United States
  • Aug 24th

People who viewed this item also vieved

NOS MOORE & WRIGHT UK 514 4" ( 100mm) INSIDE SPRING JOINT CALIPER Item #074

NOS MOORE & WRIGHT UK 514 4" ( 100mm) INSIDE SPRING JOINT CALIPER Item #074

  • Perth, Ontario, Canada
  • Jan 30th
INSIZE Dial Caliper 1311-6 (0-6x0.001")- NIB

INSIZE Dial Caliper 1311-6 (0-6x0.001")- NIB

  • Odenville, Alabama, United States
  • Jan 30th
Renishaw MIH Manual Indexable CMM Touch Probe Head Factory Rebuild with Warranty

Renishaw MIH Manual Indexable CMM Touch Probe Head Factory Rebuild with Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
DIGITAL INDICATOR .0001-1.2", 543-423-1 serial #400992 W/BASE

DIGITAL INDICATOR .0001-1.2", 543-423-1 serial #400992 W/BASE

  • Rochester, New York, United States
  • Jan 30th
VINTAGE L S STARRETT NO.711 UNIVERSAL TEST INDICATOR "LAST WORD" w/Original Case

VINTAGE L S STARRETT NO.711 UNIVERSAL TEST INDICATOR "LAST WORD" w/Original Case

  • Pegram, Tennessee, United States
  • Jan 30th
C.H. Boulin New York Compteur Hasler Speed Indicator - Made in Switzerland 1918p

C.H. Boulin New York Compteur Hasler Speed Indicator - Made in Switzerland 1918p

  • Erie, Colorado, United States
  • Jan 30th
BOICE Dial Bore Gage Set Master 1" to 1 3/4" Model 23

BOICE Dial Bore Gage Set Master 1" to 1 3/4" Model 23

  • Rochester, New York, United States
  • Jan 30th
HALDA CORREX 2 TO 15 CENTI-NEWTONS 15 CNP KM

HALDA CORREX 2 TO 15 CENTI-NEWTONS 15 CNP KM

  • Rochester, New York, United States
  • Jan 30th
New Work Lamp On Magnetic Base

New Work Lamp On Magnetic Base

  • Chino, California, United States
  • Jan 30th
Enco Tiny Titan Magnetic Base Indicator Holder With Precision Adjustment

Enco Tiny Titan Magnetic Base Indicator Holder With Precision Adjustment

  • West Salem, Wisconsin, United States
  • Jan 30th
Starret depth micrometer and Starret digital calipers

Starret depth micrometer and Starret digital calipers

  • Saint Clair Shores, Michigan, United States
  • Jan 30th
VINTAGE J.T. SLOCOMB CO. OUTSIDE & INSIDE CALIPERS 1"-14" RANGE MADE IN ENGLAND

VINTAGE J.T. SLOCOMB CO. OUTSIDE & INSIDE CALIPERS 1"-14" RANGE MADE IN ENGLAND

  • Rockford, Illinois, United States
  • Jan 30th
Starrett S565PC Drive Pin Punches 8 New In Box & Pouch

Starrett S565PC Drive Pin Punches 8 New In Box & Pouch

  • Wilmington, North Carolina, United States
  • Jan 30th
Starrett S191 Jack Screw Complete In Box

Starrett S191 Jack Screw Complete In Box

  • Wilmington, North Carolina, United States
  • Jan 30th
Brand New 320 Degree Universal Bevel Protractor Angular Dial High Quality

Brand New 320 Degree Universal Bevel Protractor Angular Dial High Quality

  • China, China
  • Jan 30th
Starrett Universal Bevel Protractor No. 364A 7 Inch with instructions NOS

Starrett Universal Bevel Protractor No. 364A 7 Inch with instructions NOS

  • Springfield, Massachusetts, United States
  • Jan 30th
PEC PRODUCT ENG CORP #7506 6" STAINLESS STEEL RULE Metal 64ths 32nds

PEC PRODUCT ENG CORP #7506 6" STAINLESS STEEL RULE Metal 64ths 32nds

  • South Fulton, Tennessee, United States
  • Jan 30th
USA 6" Rigid Black Chrome Steel 4R ruler / rule

USA 6" Rigid Black Chrome Steel 4R ruler / rule

  • Columbia, Missouri, United States
  • Jan 30th
Steel Square 3" & 4"

Steel Square 3" & 4"

  • Roselle Park, New Jersey, United States
  • Jan 30th
Vintage Antique The Lufkin Rule Co No 166- 4 1/2" Toolmaker Machinist Square

Vintage Antique The Lufkin Rule Co No 166- 4 1/2" Toolmaker Machinist Square

  • North Tonawanda, New York, United States
  • Jan 30th
CAST IRON SCRAPED SURFACE PLATE 24" X 36" X 7"

CAST IRON SCRAPED SURFACE PLATE 24" X 36" X 7"

  • Hudson, Michigan, United States
  • Jan 30th
Starrett 12" x 12" x 4" Crystal Pink Granite Surface Inspection Plate Grade B

Starrett 12" x 12" x 4" Crystal Pink Granite Surface Inspection Plate Grade B

  • Palatine, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies