+ Post new Ad
3 PCS MT2 LIVE DEAD & HALF NOTCH CENTER LATHE TURNING TOOL & WORKHOLDING #A98, US $34.00 – Picture 0
3 PCS MT2 LIVE DEAD & HALF NOTCH CENTER LATHE TURNING TOOL & WORKHOLDING #A98, US $34.00 – Picture 0

3 Pcs Mt2 Live Dead & Half Notch Center Lathe Turning Tool & Workholding #a98

US $34.00

  • Hong Kong, Hong Kong
  • Jan 30th
Open on mobile:
QR code
  LIVE, DEAD & HALF NOTCH CENTERS This Is A Set Of 3 "Brand new" Lathe Centers For Professionals And Hobbyists Demanding Ease Of Operation And High Quality Work Results. You Are Buying Industrial Quality Tools!   ITEM(S) 1 Pc. Morse Taper 2 Live Center 1 Pc. Morse Taper 2 Dead Center 1 Pc. Morse Taper 2 Half Notch Center SPECIFICATION Live Center Morse Taper 2 Medium Duty Version with 3 Pcs. Ball Bearings Max. RPM 5000 and Radial Load 150kg Total Length 145mm Outside Body Diameter 45mm Diameter of Revolving Center 26mm 60 Degree Center Dead Center Morse Taper 2 For steady centering at heavier loads Total Length 100mm Half Notch Center Morse Taper 2 Ideal to getting in close to the workpiece center Total Length 100mm Half Notch Height 11mm All Hardened & Precision Ground To Run-Out Tolerance 0.01mm PRODUCT PHOTOS Click for larger photo Click for larger photo Click for larger photo Click for larger photo PAYMENT & SHIPPING For Payment We Accept PayPal & Any Major Credit Card Via PayPal. We Ship Out Twice Weekly As Registered Airmail By Hong Kong Post And Will Inform You The Package Number. The Package Is Delivered To You By Your National Postal Service. The Average Delivery Time Is 2-3 Weeks. If It Takes Longer Then Please Enquire At Your Local Post Office Or Check The Status Online If Tracking Of Inbound International Mail Is Available In Your Country. In EU, Especially In UK, Italy And Germany, The Customs Occasionally Hold A Small Percentage Of Shipments For A Prolonged Period Of Time Without This Being Visible To The Postal Carrier. The Goods Are However Always Released And Delivered. Item(s) Are On Hand When Listed And Replenished At Minimum Stock Level. In Case We Should Run Out Of Stock You Will Be Informed And Can Choose To Wait Or Get A Refund. We Ship At A World-Wide Flat Rate. Combine Shipments And Save USD2 In The Shipping Cost For Each Additional Item Checked-Out Together Within 5 Days.  

Directions

Similar products from Live Centers

NOS HSS No. 4 Morse Taper LATHE DEAD CENTER iTEM 151A

NOS HSS No. 4 Morse Taper LATHE DEAD CENTER iTEM 151A

  • Perth, Ontario, Canada
  • Jan 30th
MT3 Live Center Metal Lathe Machinist Tool Southbend Logan Clausing Star Leblond

MT3 Live Center Metal Lathe Machinist Tool Southbend Logan Clausing Star Leblond

  • Yorktown, Virginia, United States
  • Jan 30th
Sturdimatic Live Center

Sturdimatic Live Center

  • Boaz, Alabama, United States
  • Jan 30th
Mt2 60 Degree Center Craftsman 29845 New In Box 4 Pcs

Mt2 60 Degree Center Craftsman 29845 New In Box 4 Pcs

  • Evansville, Indiana, United States
  • Jan 30th
Royal CNC live center

Royal CNC live center

  • Carson City, Nevada, United States
  • Jan 30th
Interstate - Live Center & Point Set

Interstate - Live Center & Point Set

  • Columbia Station, Ohio, United States
  • Jan 30th
Tokyo News No. 5 Live Center

Tokyo News No. 5 Live Center

  • Garden City, Idaho, United States
  • Jan 30th
Skoda 3-CSN243324 #3MT Live Center

Skoda 3-CSN243324 #3MT Live Center

  • Garden City, Idaho, United States
  • Jan 30th
MT1 MORSE TAPER #1 HALF NOTCH CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A93

MT1 MORSE TAPER #1 HALF NOTCH CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A93

  • Hong Kong, Hong Kong
  • Jan 30th
4 PCS MT1 MT2 DEAD & HALF NOTCH CENTER CNC LATHE TURNING TOOL WORKHOLDING #A97

4 PCS MT1 MT2 DEAD & HALF NOTCH CENTER CNC LATHE TURNING TOOL WORKHOLDING #A97

  • Hong Kong, Hong Kong
  • Jan 30th
MT3 MORSE TAPER #3 HALF NOTCH CENTER LATHE TOOL & WORKHOLDING TURNING #F81

MT3 MORSE TAPER #3 HALF NOTCH CENTER LATHE TOOL & WORKHOLDING TURNING #F81

  • Hong Kong, Hong Kong
  • Jan 30th
MT2 MORSE TAPER #2 HALF NOTCH CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A94

MT2 MORSE TAPER #2 HALF NOTCH CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A94

  • Hong Kong, Hong Kong
  • Jan 30th
MT2 LIVE CENTER - 7 REPLACEABLE TIPS LATHE TOOL & WORKHOLDING TURNING #G5302

MT2 LIVE CENTER - 7 REPLACEABLE TIPS LATHE TOOL & WORKHOLDING TURNING #G5302

  • Hong Kong, Hong Kong
  • Jan 30th
MT1 MK1 MORSE TAPER #1 LIVE REVOLVING CENTER CNC LATHE TURNING WORKHOLDING #A95

MT1 MK1 MORSE TAPER #1 LIVE REVOLVING CENTER CNC LATHE TURNING WORKHOLDING #A95

  • Hong Kong, Hong Kong
  • Jan 30th
NEW MT1 MORSE TAPER #1 DEAD CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A91

NEW MT1 MORSE TAPER #1 DEAD CENTER LATHE CNC TOOL & WORKHOLDING TURNING #A91

  • Hong Kong, Hong Kong
  • Jan 30th
Lot of Different Centers Quanity 30 DN5

Lot of Different Centers Quanity 30 DN5

  • Bloomfield, Connecticut, United States
  • Jan 30th
Lathe Tail Center (Live) Wood, Metal

Lathe Tail Center (Live) Wood, Metal

  • Fort Lauderdale, Florida, United States
  • Jan 30th
Lathe Crotch Center / Drill Pad -- Atlas, Craftsman, South Bend, Logan

Lathe Crotch Center / Drill Pad -- Atlas, Craftsman, South Bend, Logan

  • Barryville, New York, United States
  • Jan 30th
BISON-BIAL Live-Center Model 7-565-006 *Slightly Used*

BISON-BIAL Live-Center Model 7-565-006 *Slightly Used*

  • Waterloo, Wisconsin, United States
  • Jan 30th
The Ready Tool live center R4 (Inv.31932)

The Ready Tool live center R4 (Inv.31932)

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

8" X 8" X 8" ANGLE PLATE

8" X 8" X 8" ANGLE PLATE

  • California, United States
  • Jun 2nd
BRIDGEPORT 6 X 1 1/2 " HOLD DOWN CLAMPS

BRIDGEPORT 6 X 1 1/2 " HOLD DOWN CLAMPS

  • California, United States
  • Jun 2nd
TWO ANGLE PLATES 4" X 3 1/2" X 3 1/2"

TWO ANGLE PLATES 4" X 3 1/2" X 3 1/2"

  • California, United States
  • Jun 2nd
Southwick & Meister TORNOS TF20 .156 5/32" COLLET

Southwick & Meister TORNOS TF20 .156 5/32" COLLET

  • Coloma, Wisconsin, United States
  • Jun 4th
Southwick & Meister TORNOS TF20 .430 COLLET

Southwick & Meister TORNOS TF20 .430 COLLET

  • Coloma, Wisconsin, United States
  • Jun 4th
10 JACOBS 500 SERIES COLLET SET + CASE JACOBS RUBBERFLEX COLLETS,MACHINIST TOOLS

10 JACOBS 500 SERIES COLLET SET + CASE JACOBS RUBBERFLEX COLLETS,MACHINIST TOOLS

  • Albuquerque, New Mexico, United States
  • Jun 5th
De-Sta-Co DE-STA-CO 82L4G-2030000 Automation Power Clamp

De-Sta-Co DE-STA-CO 82L4G-2030000 Automation Power Clamp

  • USA, United States
  • Jun 5th
De-Sta-Co DE-STA-CO 858 Pneumatic Hold Down Action Clamp

De-Sta-Co DE-STA-CO 858 Pneumatic Hold Down Action Clamp

  • USA, United States
  • Jun 5th
USED 6" BUCK 3 JAW CHUCK 2063R WITH 1 1/2" Back Plate South Bend Lathe Logan

USED 6" BUCK 3 JAW CHUCK 2063R WITH 1 1/2" Back Plate South Bend Lathe Logan

  • Chatsworth, California, United States
  • Jun 6th
Forkardt collet chuck, ZKS110-42-K6-128

Forkardt collet chuck, ZKS110-42-K6-128

  • Wheeling, Illinois, United States
  • Jun 6th
MACHINIST TOOLS * SOFT JAWS * TG6158A * TONGUE & GROOVE POINTED

MACHINIST TOOLS * SOFT JAWS * TG6158A * TONGUE & GROOVE POINTED

  • Camarillo, California, United States
  • Jun 6th
MACHINIST TOOLS LATHE MILL Machinist 2 Very LARGE Vise Grip Welding Clamps # 18R

MACHINIST TOOLS LATHE MILL Machinist 2 Very LARGE Vise Grip Welding Clamps # 18R

  • Morris Plains, New Jersey, United States
  • Jun 6th
Petersen DeWitt VISE-GRIPS SET 10WR + 5WR Locking Clamp Pliers made in U.S.A.

Petersen DeWitt VISE-GRIPS SET 10WR + 5WR Locking Clamp Pliers made in U.S.A.

  • Coram, New York, United States
  • Jun 7th
Petersen DeWitt VISE-GRIPS SET 10R + 9LN + 7CR Locking Clamp Pliers made in U.S

Petersen DeWitt VISE-GRIPS SET 10R + 9LN + 7CR Locking Clamp Pliers made in U.S

  • Coram, New York, United States
  • Jun 7th
Petersen DeWitt VISE-GRIPS 8R Locking Clamp Pliers made in U.S.A.

Petersen DeWitt VISE-GRIPS 8R Locking Clamp Pliers made in U.S.A.

  • Coram, New York, United States
  • Jun 7th
Stoney Creek-Farm Babies

Stoney Creek-Farm Babies

  • Hickory Hills, Illinois, United States
  • Jun 21st
GoDog Crazy Tugs Sasquatches With Chew Guard Large-Blue

GoDog Crazy Tugs Sasquatches With Chew Guard Large-Blue

  • Hickory Hills, Illinois, United States
  • Jun 21st
"Your Next Stamp Clear Stamps 4""X6""-Oh, Deer"

"Your Next Stamp Clear Stamps 4""X6""-Oh, Deer"

  • Hickory Hills, Illinois, United States
  • Jun 21st
Machinist Set Up Wedges Armstrong 79-495 5"x1 & 79-493 3"x1 two of each!

Machinist Set Up Wedges Armstrong 79-495 5"x1 & 79-493 3"x1 two of each!

  • Jacksonville, Florida, United States
  • Jun 22nd
Anton Magnetic Transfer Block 1/4' x 2' x 2 1/4"

Anton Magnetic Transfer Block 1/4' x 2' x 2 1/4"

  • Lynbrook, New York, United States
  • Jun 22nd
Starrett 568 V-Block And Clamp

Starrett 568 V-Block And Clamp

  • North Royalton, Ohio, United States
  • Jun 22nd
Convert your own 3 axis CNC Router into a 5 axis machining centre

Convert your own 3 axis CNC Router into a 5 axis machining centre

  • Buenos Aires, Argentina
  • Oct 27th
Dividing Head; Ellis (CTAM #472)

Dividing Head; Ellis (CTAM #472)

  • Sicklerville, New Jersey, United States
  • Oct 27th
Rotary Table; Palmgren 8"; (CTAM #470)

Rotary Table; Palmgren 8"; (CTAM #470)

  • Sicklerville, New Jersey, United States
  • Oct 27th
++ LINTECH SHAFT ASSEMBLY WITH SPB-16 OPN PILLOW BLOCKS 18" LONG

++ LINTECH SHAFT ASSEMBLY WITH SPB-16 OPN PILLOW BLOCKS 18" LONG

  • Bosque Farms, New Mexico, United States
  • Oct 31st
(8) Lathe Dogs, Grinder dogs 3/8", 5/8", 1", (3) 1-1/4", 1-1/2", 2" Diameters

(8) Lathe Dogs, Grinder dogs 3/8", 5/8", 1", (3) 1-1/4", 1-1/2", 2" Diameters

  • Zanesville, Ohio, United States
  • Oct 31st
Mathey MSA pipe beveler 4" beveling machine with torch bracket

Mathey MSA pipe beveler 4" beveling machine with torch bracket

  • Camano Island, Washington, United States
  • Oct 31st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies