3/8 bushings for sale, brand-new and used.

* VINTAGE STARRETT 3/8" REDUCING BUSHING IN ORIGINAL BOX - NO. 657K OR 665L * * VINTAGE CRAFTSMAN END MILL BUSHINGS SET OF 4 PLUS 1 NO. 2984 * * ALL NEW OLD STOCK IN GOOD USEABLE CONDITION

NEW IN BOX 10 INCH GRINDING WHEEL MADE IN THE USA 10X1-1/2X1-1/4 HAS BUSHINGS TO FIT 1,7/8,3/4 INCH ARBOR 60 GRIT Posted with eBay Mobile

Just starting in aviation? This is your dream Ebay sell. All tools are used with the exception of the tack cloth.

SMP Liquidators

BROACH set WITH 5 RHINO high speed broaches , with bushings 1/2 ,5/8,3/4,1,1 3/16, 1 1/4, 1 3/8 ,1 1/2 , with shims , set in wooden box ,this set is used but looks in very good condition . email me with any questions Thank You Tony

Square D / Telemecanique GV2-M07 Manual Motor Starter Switch in GV2 Enclosure Used in good condition taken from working unit. Power and load wires are attached with water tight strain relief bushings. Buyer to pay by Paypal or check (checks will be held until cleared).

20 new oil impregnated bronze bushings 5/8" long, 3/8" OD, 1/4" ID

Lot of 3 AA Standard Drill Bushings 

I will gladly ship multiple items together as long as it is safe to do so.

I will gladly ship multiple items together as long as it is safe to do so.

57 STEEL BUSINGS 3/8 HOLE THROUGH CENTER, LEGNTHS ARE 2 INCHES , 1 1/4 INCHES, 3/4 INCHES AND A FEW SMALLER ONES. NEW NEVER USED SHELF STOCK. EMAIL ANY QUESTIONS SEE MY OTHER ITEMS UP FOR SALE NO RESERVE

Speed Systems CT-1 Chamfering Tool for Underground Cable Wire Strippers The CT-1 Chamfering Tool cut a 45 degree bevel on the insulation of cables with an O.D. of 1/2" to 1-3/8" Features Chamfers cable end at 45 degrees For use on .175" to .345" insulation (15kV thru 35kV)

CONDITION = NEW WIRE WHEEL MANUFACTURER = ANDERSON {USA} WIRE IS STAINLESS {302 IS MARKED ON HUB} WIRE WHEEL DIAMETER = 3" WIRE WHEEL WIDTH = 1/2" WIRE THICKNESS = .005" {COPPER} ARBOR HOLE = 5/8" {2 BUSHINGS INCLUDED WILL GO TO 1/2" THEN 1/4"} WIRE STYLE = CRIMPED MAXIMUM RPM = 20,000