3/8 pvc for sale, brand-new and used.

Foam Tape Black PVC PSA-1 Sided 3/4"wide x 1/8" thickness x 50' long PVC rolls have the release liner is attached to the material, not the adhesive. Therefore, when unwinding the roll you will get exposed adhesive with the liner left on the foam for ease of use, then remove when you choose.

Foam Tape Black PVC PSA-1 Sided 3/8" x 3/8" x 30' Medium Density PVC rolls have the release liner is attached to the material, not the adhesive. Therefore, unwinding the roll you will get exposed adhesive with the liner left on the foam. &nb

Hardcast Foil- Grip 1402 Foil-Grip is a pressure sensitive duct joint and general purpose rolled sealant. Foil-Grip provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip is suitable for subgrade application on PVC coated du

Up for sale is a SAMPLE LOT OF 4 ROLLS OF AUTOMOTIVE CAR WIRE HARNESS INSULATING PET (POLYESTER) AND VINYL (PVC) TAPE. Tape rolls vary in width from 19mm to 32mm and lengths are from 25m to 54m. Each tape roll varies in weight from 2.6 ounces at 7.8 ounces per roll.

Up for sale is a 1 ROLL OF GERMAN MADE COROPLAST AUTOMOTIVE WIRE HARNESS INSULATING PET (POLYESTER) TAPE. Tape roll is 19mm in width by 25m in length and weighs in at 3.8 ounces per roll. TAPE IS VERY STRONG PLUS TEAR RESISTANT AND FLAME RETARDANT.

Two packs Made of rubber resin All weather vinyl insulating tape Premium quality Lead free Super strong adhesion Flame retardant Abrasion, acid, corrosion alkali, moisture and fade resistant

3M SCOTCH Premium Vinyl Electrical Tape SUPER 88 Mfr. Number: 80-6108-33878-5 Roll Width: 3/4" Roll Length: 108 Ft (36 yd) Tape Thickness: 8.5 mil Backing Material: Poly Chloride, Vinyl Material: PVC Adhesive Material: Rubber Resin Operating Temperature Range: 0 to 220° F Color: Black Quantity: 12 Rolls Made in USA FREE SHIPPING!

General Purpose PVC Electrical Tape Red/White/Blue/Black/Yellow Red 1pcsWhite 1pcsBlue 1pcsBlack 1pcsYellow 1pcs This product is mainly used for the dressing of 600 volts and wire connectors

Surface Mounted Petite Paper Towel Dispenser shall hold and dispense 200 standard C-fold or 275 standard multi-fold paper towels and shall be fabricated 22 gauge type 304 stainless steel alloy 18-8. All exposed surfaces shall have a No 4 satin finish and shall be protected during shipment with PVC film easily removable after installation. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.

You are bidding on ( 1 ) new Chevron 6807310, 3' x 10', Charcoal, Indoor / Outdoor Polypropylene Scraper Mat P/N 6807310 Size - 3' x 10' Color - Charcoal Suface material - Needlepunched Polypropylene, 24 oz. / sq. yd., 3/8" pile (high) 1/4" pile (low) Backing Material - Compounded PVC Made in USA Shipping will be USPS Priority Mail or UPS Ground for 22 lbs.

ASI Recessed C-Fold Paper Towel Dispenser with Stainless Steel Finish ASI C-Fold Paper Towel Dispenser Manufactured By: ASI -American Specialties, Inc. Towel dispenser measures 28"H X 6 1/4"W X 4 1/4"D Recessed Paper Towel Dispenser shall hold and dispense 475 standard multi-fold or 350 standard C-fold paper towels. Towel dispenser, door, frame and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge.

You are Bidding on a Brand New American Specialties Model 6452 Recessed Paper Towel Dispenser. This model retails for over $200.00 plus shipping. The picture shows this unit with the protective white film over the stainless steel.

For sale is a New American Specialties Inc. Recessed Stainless Steel C-Fold Paper Towel Dispenser & Disposal. Model #0469 I am willing to be available if buyer wants to arrange shipping.

Surface Mounted Paper Towel Dispenser shall hold and dispense 525 standard multi-fold or 400 standard C-fold paper towels and shall be fabricated 22 gauge type 304 stainless steel alloy 18-8. All exposed surfaces shall have a No 4 satin finish and shall be protected during shipment with PVC film easily removable after installation. Towel dispensing slot shall have a fully hemmed in rolled edge for snag-free dispensing and user safety.