300ml Sublimation Coating/spray For Cotton Fabric & Polyester/cotton

US $7.99

Tirana, Albania
Jul 28th

Open on mobile:
QR code

Cotton Sublimation polymer coating. Made in Italy. Very high quality and easy to use. 3 - A Brand. Polymer concentrate for sublimation liquid coating. Sublimation to Fabric ( 100% cotton, blended cotton, linen, polyester, etc.) . The concentrate is paste form, shelf life 1 year ( 10 months after your ordering), stored in place away from sunlight, in temperature 5-40 grade celsius. Note: We offer concentrate to make coating liquid for cotton. The packaging contains 60gr polymer concentrate 3-A brand. With 60gr 3-A brand polymer concentrate you can make 300ml liquid coating ( 60gr concentrate + 240gr natural water = 300ml liquid coating ) Video Tutorial: 1. How to make Liquid coating 3-A brand: https://www.youtube.com/watch?v=FBbMLSvD6rE 2. How to make sublimation to 100% cotton with 3-A polymer coating : https://www.youtube.com/watch?v=397PZVfBrUQ TRANSFER CONDITIONS MATERIAL TEMPERATURE TIME Cotton 180°C (or higher) 50-60 sec The paper may be printed with every kind of sublimation ink. Such paper has to be transferred at a minimum temperature of 180°C or higher (depending of the ink), for a time of 50/60 seconds, quality of the fabric permitting. It is essential that the peeling of the paper takes place immediately after hot transferring (hot split), in order to avoid that the paper peels off not perfectly Instructions 1. Make the liquid coating (mix polymer concentrate with water at Rate 1:4, 1 concentrate : 4 natural water) 2. Spray well the fabric with polymer liquid coating. 3. Cure well the fabric before to press in heat press. 4. Press for sublimation with medium pressure for 50-60 seconds at 180 0C or higher ( depending of the ink) Heat cures: heat gun ( hair dryer ) , tunnel dryer etc. Note: Mix well the concentrate with water for more than 3 minutes, for good homogenization (you can mix with kitchenware mixer, electric hand-mixer). For wood sublimation you can spray coating liquid or you can use paint brush or paint roller for the application of concentrate in paste form. SPECIAL INSTRUCTIONS · Always test the application characteristics, before starting production. · It is recommended to do preliminary tests, in order to determine the right transfer time and temperature. GENERAL FEATURES · Good color performance after sublimation · Soft touch · Good washing resistance (40°C) · Free from risk labelling Always test samples prior to production runs. NON – FLAMABLE., IRRITATING TO EYES & RESPIRATORY SYSTEM, DO NOT SWALLOW.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Country/Region of Manufacture	Italy
Brand	3-A