36" Flow Science Hood, Ventilated / Balance Enclosure, Nice w Fan Filter, US $786.00 – Picture 0

36" Flow Science Hood, Ventilated / Balance Enclosure, Nice w Fan Filter, US $786.00 – Picture 1

36" Flow Science Hood, Ventilated / Balance Enclosure, Nice w Fan Filter, US $786.00 – Picture 2

36" Flow Science Hood, Ventilated / Balance Enclosure, Nice w Fan Filter, US $786.00 – Picture 3

36" Flow Science Hood, Ventilated / Balance Enclosure, Nice w Fan Filter, US $786.00 – Picture 4

36" Flow Science Hood, Ventilated / Balance Enclosure, Nice w Fan Filter, US $786.00 – Picture 5

36" Flow Science Hood, Ventilated / Balance Enclosure, Nice W Fan Filter

US $786.00

Lake Elmo, Minnesota, United States
Jan 30th

Open on mobile:
QR code

3' ( 36" ) wide Hood, Ventilated / Balance Enclosure, Nice Flow Science, with Fan & Filter unit. Clear Bright, Acrylic, Benchtop Unit, 36"x 23"x 29-1/2" We have Two ( 2 ) of these available - both identical. Very nice benchtop Flow Science Clean hood, Model FS2350, FVA, VBSE, for clean sample transfers, preparations, weighing balances, controlled Lab work to minimize or control contamination. Flow Science makes some of the finest small, Lab hoods such as this one. Crystal clear, thick, Acrylic on three sides and the top with a full width fold up front panel to allow adding large items or extra work space during use. Overall size is 36" W x 22-1/2"Deep x 29-1/2"H with a very solid, 1" thick black base that is 36" x 23". A flow detector and alarm system, AirGard Model 335, is included on the front panel. Very nice slanted front panel folds up to provide extra wide / high working front. Front fold up door is 10-1/2" wide and the full 36" width. This adds to the normal working opening of 7-1/2" x 36" which is restricted for safety and added cleanliness. Excellent for many high Tech Labs, Classrooms, Q.C. , etc. Moderatly portable; not as clumsy or heavy as the similar 48" clean hoods No, the wheels are NOT included! Also included is the special series FS4000 ( Model FS4010 ) Fan / Filter housing with a variable speed blower and 4" ducting for connection to the hood for clean, filtered controlled positive air flow. Flexible 4" D ducting is included for connecting. This special fan is pressure sensitive and increases speed when excess pressure is detected in the outlets. It can be mounted on top of the hood as shown, or behind it or beside it or under it. If you want to mount the fan on the wall, we can send with a sturdy angle iron, blue frame that can be attached to the wall to hold it. But it adds about 25# to shipping. Standard 110 V, 2.4A, thermally protected motor. Overall size is 13-1/4" x 13-1/4" x 18-1/2" high for standard HEPA or other filters readily available. ( not supplied ). #1366, #1704, #1706 NOTE: If you want the unit Without the fan, we will discount it $100. But you must state so in your bid. NOTE: Shipping will be expensive even though the weight is probably under 100# because UPS and other shippers go by "Dimensional Weight". This is the L x W x H / 166 and is over 150# If you have a preferred carrier or account you can probably arrange for cheaper shipping; or pickup. Please check before ordering.

Condition	Seller refurbished : An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes	“It is in pristine condition; like new!”