39"x24" 130W Single Head Laser Engraving Cutting Machine Laser Cutter, US $9,720.00 – Picture 0

39"x24" 130W Single Head Laser Engraving Cutting Machine Laser Cutter, US $9,720.00 – Picture 1

39"x24" 130W Single Head Laser Engraving Cutting Machine Laser Cutter, US $9,720.00 – Picture 2

39"x24" 130W Single Head Laser Engraving Cutting Machine Laser Cutter, US $9,720.00 – Picture 3

39"x24" 130W Single Head Laser Engraving Cutting Machine Laser Cutter, US $9,720.00 – Picture 4

39"x24" 130W Single Head Laser Engraving Cutting Machine Laser Cutter, US $9,720.00 – Picture 5

39"x24" 130W Single Head Laser Engraving Cutting Machine Laser Cutter, US $9,720.00 – Picture 6

39"x24" 130w Single Head Laser Engraving Cutting Machine Laser Cutter

US $9,720.00

Haidian Beijing, China
Mar 4th

Open on mobile:
QR code

This is FOB price. Free sea shipping to America, ship from USA. Other countries, free sea shipping from China. Warranty Mechanical and electronic components: 2 year against manufacturing defects. Parts and components damaged due to improper usage and operation of the equipment are not covered under warranty. The complete warranty shall be available once the customer has accepted and received the training program and the purchase agreements are signed by the customer. CO2 laser tube: 6 months against manufacturing defects. Laser optical components are considered consumables and are therefore not covered during the warranty period. The voltage regulator installed in this equipment is a consumable part is not included in the guarantee. In order to ensure the customer experience the best performance of the equipment and the complete warranty policy of our company, we urge following the instructions on the Safety Notice in the Operation Manual and follow the instructions of our technician on the installation of the laser machine. Failure to do so may render the warranty null and void. Installation and Training: Technical support is offered via telephone, e-mail and other ways. Instruction of installation will be written (emailed). A video with the installation of the Laser Machine is available. Until 8 hours of training (2 days of 4 hours) in the Installation Maintenance & Operation of the Laser Machine, as well as the included software is available Free of charge in our premises in Los Angeles, California. Large worktable (39" x 24"x 10") and rear pass-thru allows easy the loading of materials such as bulk rolls or full 3’ x 8’ or 3’x10’ sheets. Reason why we can offer you the most convenient price of the market, two years of the best warranty and the faster shipping of any spare part and technical support, free for life. The high quality, RELIABILITY AND PROFITABILITY of our CM90SHB is supported by our Research and Development Department with more than 30 expert engineers, masters and doctors in physics and electronic sciences of the laser technology and manufactured in accordance with the programs QB / T1700-2001 and ISO9001: 2000. With laser tubes of 130 Watts, this laser engraving and cutting machine is the best if you need high quality and high speed cutting and engraving on an area of 39 x 24 inches. Also, it can engrave pieces until 20 inches of height or cylindrical surfaces until 9 inches of diameter. Main Configuration: Maximum Working Area: 39" x 24" (1000mm x 620mm) Cutting Speed: 0 – 584mm / s (0 – 23IPS) (Depending the material to cut) Engraving Speed: 0 – 1066mm /s (0 – 42IPS) (Depending the material to engrave) Laser Power: 130W Max. Cutting Thickness (Acrylic): 3/4 inches or more (0-25mm) (Depending the material to cut and the power and laser lens) Resolution: Up to 4000DPI (The regular use is between 600DPI and 2000DPI) Minimum Configuration: Characters 0.07" x 0.07" (2mm x 2mm) and letters 0.039" x 0.039" (1mm x 1mm) Precision Tolerance: 0.00039" (0.01mm) Power supply: AC220V ± 10%, 50 / 60Hz Power Consumption: 1250 Watts With Electric Up and Down Lifting Table, Rotary Fixture, 130W Tube and Stepper Motor, two sets of working table Appearance of the laser cutting machine 1. THE MOST PROFITABLE WORK AREA: Two worktable sets 39” x 24” x 10”: (1) honeycomb to cut thinnest material (fabric, paper, etc.) and (1) Stripped to cut hard and inflammable materials (acrylic, wood, foam, etc.) and getting the cleanest edge cut. The Up/Down work table can fit pieces of 10” deep. Also, you can remove both worktable and reaching 20” deep. It is powered by two motor Up/Down worktable with speed control, it can load 120 pound. AREA: Effective work area: 39 x 24 x 10 inches. 2. LASER TUBES: Laser tube 130W RC-KT: Real power to cut until 1 -1/8” (30 mm.) thick acrylic – more than any other laser machine - and taking in advantage the high speed of stepper motors, you can get the double of production than other laser machines. Our laser tube 130W RC-KT is manufactured by us and our technology to get until 10,000 working hours and the replacement is just $1,200.00; this means you are paying just $0.92 per Kilowatts by hour, better than any other. Emits a perfect laser beam. Easier alignment system, the laser tube lies up on stable and adjustable stands. Protection system to avoid sparks better than others. 3. LASER HEADS: Efficient transmission laser beam system: The perfect laser beam comes from the laser tube… the silicon mirrors reflect the 99% of the power and the American laser lens doesn't absorb power, allows the pass of energy focused in the point of work. 4. SOFTWARE AND WORKING CONTROL: The CM90SH communicates via it USB 2.0 port to a computer and its control software. Similar to outputting to a printer, this makes it easy to manage various parameters such as power, speed and resolution in order to achieve the desired results. The controller software is included at no additional charge. Two ample work area 39''x24''x10'',rear window to pass through... FORMATS SUPPORTED BY THE SOFTWARE: It supports practically all standard graphic design formats: bmp, gif, jpg, pcx, cad, tga, tiff, plt, cdr, dmg, dxf and dst. 5. LASER HEAD X-Y-Z AXIS POSITIONING SYSTEM Its Laser head positioning system is fast and extremely accurate thanks to its components. Its steel gantry rails and laser head movement system is made in Korea and its electronic controller motors are made in Japan. 6. LENS: Our laser machine has a American optics system that optimizes the focus and efficient of the laser beam on materials, allowing it to produce fine cuts or deep engravings, depending on your requirements.This laser lens doesn’t absorb power and can last for more and more time than others. 7.ELECTRONIC CHILLER INCLUDED: Highly efficient with only minimal maintenance, the included TWO ELECTRONIC CHILLER regulates and controls the laser tubes temperature in the while in operation. 8. EXHAUST BLOWER AND TUBE INCLUDED: Various materials release small amounts of fumes and gases in the engraving or cutting process. To extract these fumes and gases, our CM90 comes equipped with one exhaust system and 12 feet (4 meters) of adjustable ventilation duct tubing to be installed when the machine is being operated inside a small and enclosed area. 9.AIR ASSIST SYSTEM: This equipment comes equipped with one air compressors to feed the air assist system to clear smoke & debris from the work area, cool and protect the Laser Head focusing lens, diminish the amount of flaming, scorching, charring from the work piece, and reduce the chances of ignition when it is working with flammable materials. 10. EMERGENCY STOP BUTTON AND SAFETY SENSORS: An easy-to-use multilingual LCD Control Panel is incorporated as well as Potentiometers to regulate the laser tubes output, laser beam activator button. Our laser machines are equipped with security sensors and safety features disabling the equipment in case of inappropriate use or unsafe operational conditions, as well as the ability for the machine operator to IMMEDIATELY and completely shut down the entire machine in the event such a situation or circumstances arise. Features: • 39" x 24" (1000mm x 620mm) working area • Up to 42IPS high working speed • Laminated Safety Glass, glass viewing windows creating a safe enclosure for laser processing. • Adopts the super fine cutting technology, which has features of extensive material processing, smooth cutting edge and burr-free, avoid polishing, processing high speed, high precision. • Adopt high precision equilibrium linear guide, more stable, servo motor is in high-end applications. • Pass - through front and rear doors to accommodate long working pieces. • The laser cutter machine is equipped with two high quality CW5200 water chillers. • Plug and play standard USB port for rapid data transmission. • Easy to operate: We provide two set of English software: ACE and PRINTER DRIVER, they are developed by ourselves and easy to learn. ACE can input BMP and PLT file format design, then edit and output them; Print Driver can directly output many file format in Windows system, like Photoshop, CorelDraw, AutoCAD, etc. Neat working environment: The working process is clean, quiet with least waste of material. Compare with the common laser engraver and cutter, CM90SH has more advantages as bellow: LCM-CM90SHB Common Machine Laser head: Enclosed Laser head: Unenclosed Guide rail: High precision equilibrium linear guide rail imported from Korea Guide rail: Chinese quality common aluminum guide rail 1. Signs, Awards and Trophies, Furniture and Frame, Cabinets, Engineering and Architecture, Custom Crates... 2. Two 130W laser tubes and stepper motors to get faster and better cutting and engraving: Acrylic, Plastics, Wood, Plywood, MDF, Foam, Cardboard... 3. Textile and Apparel, Shoes and Leather, Labels Manufacturing, Arts, Printing... Stepper motors to get precision, transmission system of laser beam: Silicon mirrors 99% reflection, lens from the US for a clean cutting and engraving: Leather and Chamois, Any Fabric, Push, Tulle, Laserable Metal... Quality Instructions: Handling - Shipping & Delivery Packing List Machine Dimension 88" x 60" x 44" (2235mm x 1524mm x 1118mm) Machine Weight 840lb (381kg) Package Wooden box Packing Size 90" x 74" x 55" (2286mm x 1880mm x 1397mm) Gross Weight 950lb (431kg) OPERATION MANUAL A complete Operation Manual is included in the software installation CD. It contains clear explanations of the Installation process and the usage of the software, the control panel and other features. Laser Engraving & Cutting machine 1 set Laser tube 1 pc KT-5200 water chiller 1 set Air pump 1 set Exhaust Fan 1 set Rotating Unit 1 set Corrugate tube 2 pc Hose clamp 4 pc Kit 1 unit Power line 1 pc Software, USB Dongle, USB cable 1 set Socket plate 1 pc User’s Manual 3 pc 703 silicone glue 1 pc Packing: Notes: After clearing payment and all shipping information, machine will be dispatched 5 business days later and we will arrange the earliest shipment. Please note your phone number for shipping, when special status happened, forwarder will call you. The free shipping means by sea to Basic sea port not to your door, please leave your nearest harbour name, then we will arrage disapatching soon after cleared payment. Seller is not responsible for all damage on delivery. We will carefully check all items before shipping. We ship items out on Monday-Friday. The free shipping means by sea to basic sea port of your country not to your door, It is FOB term, buyer should pay surcharge of harbour, handling charges and clear custom and pay import duty. For our experience, the surcharge and handling charges in UK and Euro countries is a little higher than other area, hope buyers can check the total cost before bidding? When the machine arrive the harbour as we confirmed before shipping, please pick up the machine from the warehouse in the harbour soon, if some customer refuse to pick up the machine from the warehouse, we will not refund the payment. Packing List Machine Dimension 88" x 60" x 44" (2235mm x 1524mm x 1118mm) Machine Weight 840lb (381kg) Package Wooden box Packing Size 90" x 74" x 55" (2286mm x 1880mm x 1397mm) Gross Weight 950lb (431kg) OPERATION MANUAL A complete Operation Manual is included in the software installation CD. It contains clear explanations of the Installation process and the usage of the software, the control panel and other features. Laser Engraving & Cutting machine 1 set Laser tube 2 pc KT-5200 water chiller 2 set Air pump 1 set Exhaust Fan 1 set Corrugate tube 2 pc Hose clamp 4 pc Kit 1 unit Power line 1 pc Software, USB Dongle, USB cable 1 set Socket plate 1 pc User’s Manual 3 pc 703 silicone glue 1 pc Packing: apps.froo.com | Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Model

LCM-CM90SHB-130W