3axis Nema23 Stepper Motor 425oz-in,4.2a Cnc & & Driver & 2 Powers

US $108.13

United States
Jan 29th

Open on mobile:
QR code

This Item includes: 3 PCS Nema 23 Stepper Motor Single shaft with 428oz-in holding torque,4.2A, 3 PCS Stepper Driver with 4.2A DQ542MA replacing M542, 2 PCS Power Supply for 350W,36VDC, 1 PC DB25 Breakout Board & 1 Cable 1, Stepper Motor for Nema 23 with 425oz-in Technical Specifications Part No.: WT57STH115-4204A Single shaft Frame Size: NEMA23 Step Angle: 1.8 degree Voltage: 6.3VDC Current: 4.2 A/phase Resistance: 2.1Ohm/phase Inductance: 9mH/phase Holding torque: 3N.m 428oz-in Rotor inertia: 810 g-cm2 Detent torque: 0.89 kg-cm Number of wire leads: 4 Weight: 1.55KGS Length: 115mm Shaft diameter: 8mm 2, Stepper Motor Driver DQ542MA 1 PC DQ542MA with 4.2A peak current, 18-50VDC, 128 Microstep http://www.wantmotor.com/ProductsView.asp?id=257&pid=82 Introduction: DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is smiliar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. Features: High performance, low price Average current control, 2-phase sinusoidal output current drive Supply voltage from 18VDC to 50VDC Opto-isolated signal I/O Overvoltage, under voltage, overcorrect, phase short circuit protection 15 channels subdivision and automatic idle-current reduction 8 channels output phase current setting Offline command input terminal Motor torque is related with speed, but not related with step/revolution High start speed High hording torque under high speed Electrical specification: Input voltage 18-50VDC Input current < 4A Output current 1.0A~4.2A Consumption Consumption:80W; Internal Insurance:6A Temperature Working Temperature -10~45°C; Stocking temperature -40°C~70°C Humidity Not condensation, no water droplets gas Prohibition of combustible gases and conductive dust weight 300GS 3, Power Supply 350W,36VDC,9.8A 4, Breakout board Description: Built in DB25 male connector. DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17. DB25 Input Pin: P10,P11,P12,P13,P15. DB25 GND Pin: P18-P25. Power supply: +5V DC. Built in C-class Optical-coupler. High quality with Surface-mount Tech.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Wantai
MPN	www.wantmotor.com
Model	WT57STH115-4204A
Country/Region of Manufacture	China