3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 0

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 1

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 2

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 3

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 4

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 5

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 6

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 7

3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY JDSU, US $19,499.99 – Picture 8

3d Systems Rapid Prototype Machine 3d Printer Sla 250 Stereolithography Jdsu

US $19,499.99

Louisville, Kentucky, United States
Feb 13th

Open on mobile:
QR code

THIS AUCTION IS FOR A USED 3D SYSTEMS RAPID PROTOTYPE MACHINE 3D PRINTER SLA 250 STEREOLITHOGRAPHY NEWLY UPGRADED TO A JDS UNIPHASE XCYTE CY-SM60 60m W SOLID STATE LASER. 3D PRINTER STILL UNDER POWER YOU CAN SEE IT RUN OR IF YOU WANT TO INSPECT MACHINE IS LOCATED IN LOUISVILLE,KY. PLEASE EMAIL OR CALL 502-852-0848 IF YOU HAVE ANY QUESTIONS OR SHIPPING QUOTE. MODEL SLA-250 S/N 89032 Laser Type HeCd HeCd HeCd Wavelength 325 nm 325 nm 325 nm Power at vat (at 2000 hrs) 12 mW 24 mW 6 mW Warranty (one (1) year prorated) 2000 hrs 2000 hrs 2000 hrs Recoating System Process Doctor Blade Zephyr recoater Zephyr recoater Min. recommended layer thickness* 0.15 mm (0.006 in) for ACES™ and QuickCast™ build styles 0.1 mm (0.004 in) for ACES and QuickCast build styles 0.0625 mm (0.0025 in) for TECHWEAVE only** Optical & Scanning Spot size (diameter @ 1/eІ) 0.20-0.28 mm (0.008- 0.011 in) 0.20-0.28 mm (0.008- 0.011 in) 0.06- 0.08 mm (0.0025- 0.0035 in) Maximum part drawing speed 762 mm/sec (30 in/sec) 762 mm/sec (30 in/sec) 635 mm/sec (25 in/sec) Elevator Vertical resolution 0.0025 mm (.0001 in) Maximum part weight 9.1kg (20lb) Vat Capacity Volume 32.2 L (8.5 US gal) Maximum build envelope 250 x 250 x 250 mm (10 x 10 x 10 in)** Interchangeable vat No Yes Yes Software Operating system MS-DOS Network type & protocol Ethernet, IEEE 802.3 using TCP/IP and NFS Power (other options available) 120 V AC ± 10%, 10A, 50/60 Hz or 230 V AC ± 10%, 5.2A, 50/60 Hz Ambient Temperature Temperature range 20-26°C (68-79°F) Maximum change rate 1°C/hour (1.8°F/hour) Relative humidity Less than 50%, non-condensing Size Crated W1.42 x D0.91 x H2.00 m (W56 x D36 x H79 in) Uncrated W1.24 x D0.69 x H1.64 m (W49 x D27 x H64.5 in) Weight Crated 461 kg (1,014 lb) Uncrated 362 kg (796 lb) PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS.

“USED BUT IN GOOD WORKING CONDITION!! NEWLY UPGRADED LASER TO SOLID STATE LASER!! PRINTER STILL UNDER POWER CAN SEE RUN OR INSPECT!!”