+ Post new Ad
3MM X 100MM 3-FLUTE HRC55 Al & Cu CTR CUTTING 45° HELIX CARBIDE FLAT ENDMILL 1x, US $86 – Picture 0
3MM X 100MM 3-FLUTE HRC55 Al & Cu CTR CUTTING 45° HELIX CARBIDE FLAT ENDMILL 1x, US $86 – Picture 0

3mm X 100mm 3-flute Hrc55 Al & Cu Ctr Cutting 45° Helix Carbide Flat Endmill 1x

US $86

  • --, Hong Kong
  • Nov 4th
Open on mobile:
QR code
3MM X 100MM 3-FLUTE HRC55 Al & Cu CTR CUTTING 45° HELIX CARBIDE FLAT ENDMILL 1x MATERIAL : MICRO-GRAIN SOLID CARBIDE COATING : NO SUITABLE TO CUT WORK-PIECE OF HARDNESS BELOW HRC55. VERY GOOD FOR ALUMINIUM AND COPPER MACHINING. CUT MUCH BETTER THAN THE HRC45 SERIES ENDMILL. 3 - FLUTE HELIX : 45° RIGHT HAND UP CUT THREE FLUTES OF DIFFERENCE BOTTOM WIDTH. CENTER CUTTING. END TYPE : FLAT / SQUARE CUTTER DIAMETER : 3MM TOTAL LENGTH : 100MM FLUTE LENGTH : 12MM SHANK DIAMETER : 4MM PACKING :  ONE PC IN ONE BOX PROVIDE TAILOR MADE ENDMILL. MAKE ACCORDING TO CUSTOMER REQUEST. NO ADVANCE PAYMENT REQUIRE. PAY JUST BEFORE SHIPMENT. WE SHIP WORLDWIDE. BY E-PACKET OR AIR MAIL. THANK YOU FOR ATTENTION.

Directions

Similar products from End Mills Router & Drill Bits

Accusize - 2" Carbide Indexable End Mills R8 Shank with 3 Pcs TPG 322 Inserts...

Accusize - 2" Carbide Indexable End Mills R8 Shank with 3 Pcs TPG 322 Inserts...

  • US, United States
  • Nov 6th
3 NEW 8 MM SHANK CARBIDE END MILLS. 2 FLUTE. BALL. CUT DIA MAY VARY. USA {J658}

3 NEW 8 MM SHANK CARBIDE END MILLS. 2 FLUTE. BALL. CUT DIA MAY VARY. USA {J658}

  • Mentor, Ohio, United States
  • Nov 5th
7Pc 4 flutes Tungsten Carbide End Mills set bits milling cutter HRC50 1mm to 4mm

7Pc 4 flutes Tungsten Carbide End Mills set bits milling cutter HRC50 1mm to 4mm

  • shenzhen, China
  • Nov 5th
5 x 1/4" x 1-1/4" HHS Mill Slot Cutter Slitting Saw 22 Tooth

5 x 1/4" x 1-1/4" HHS Mill Slot Cutter Slitting Saw 22 Tooth

  • Middlebury, Indiana, United States
  • Nov 5th
A.H. LTD 7 x 3/4" x 1-1/2" HHS Mill Slot Cutter Slitting Saw 30 Tooth

A.H. LTD 7 x 3/4" x 1-1/2" HHS Mill Slot Cutter Slitting Saw 30 Tooth

  • Middlebury, Indiana, United States
  • Nov 5th
Brownells 45 Degree Chamfering Cutter

Brownells 45 Degree Chamfering Cutter

  • Valley Stream, New York, United States
  • Nov 5th
Niagara 3/4 " Dia. 3 Flute SE Carbide End Mill

Niagara 3/4 " Dia. 3 Flute SE Carbide End Mill

  • Blue Springs, Missouri, United States
  • Nov 5th
2 CGC TOOL CEM516F4 5/16 X 7/8 X 2-1/2 4FL FLAT SINGLE ENDMILL TIALN

2 CGC TOOL CEM516F4 5/16 X 7/8 X 2-1/2 4FL FLAT SINGLE ENDMILL TIALN

  • La Habra, California, United States
  • Nov 4th
1/2" 4 FLUTE VARIABLE HELIX CARBIDE END MILL - .030 RADIUS - TiALN COATED

1/2" 4 FLUTE VARIABLE HELIX CARBIDE END MILL - .030 RADIUS - TiALN COATED

  • Elmhurst, Illinois, United States
  • Nov 4th
2-1/4 Shell Mill HSS Made in USA R2251

2-1/4 Shell Mill HSS Made in USA R2251

  • Danvers, Massachusetts, United States
  • Nov 4th
MACHINIST TOOLS LATHE MILL Machinist Lot of Misc End Mills Reamers Drill Bits

MACHINIST TOOLS LATHE MILL Machinist Lot of Misc End Mills Reamers Drill Bits

  • Ishpeming, Michigan, United States
  • Nov 4th
PRE-OWNED TRW 3 FLUTE 17/32" X 25/32" HIGH SPEED STEEL END MILL

PRE-OWNED TRW 3 FLUTE 17/32" X 25/32" HIGH SPEED STEEL END MILL

  • Westland, Michigan, United States
  • Nov 4th
Woodson Micro Mini Double End Ball End Mill Style D4B (2 Flute) 1/16" x 3/16"

Woodson Micro Mini Double End Ball End Mill Style D4B (2 Flute) 1/16" x 3/16"

  • Campton, New Hampshire, United States
  • Nov 4th
Chicago Latrobe Double End End Mill Style No. 820 (2 Flute) 3/16" x 7/64" HSS

Chicago Latrobe Double End End Mill Style No. 820 (2 Flute) 3/16" x 7/64" HSS

  • Campton, New Hampshire, United States
  • Nov 4th
6 PIECE 4 FLUTE HIGH SPEED STEEL END MILL SET (3/8 INCH SHANK) (8000-0002)

6 PIECE 4 FLUTE HIGH SPEED STEEL END MILL SET (3/8 INCH SHANK) (8000-0002)

  • Chino, California, United States
  • Nov 4th
Lot 2pcs HSS 2 Flute End Mills Cutting Dia 16mm Shank Dia 16mm Japan Brand Bits

Lot 2pcs HSS 2 Flute End Mills Cutting Dia 16mm Shank Dia 16mm Japan Brand Bits

  • CN, China
  • Nov 3rd
1pcs HSS 2 Flute End Mills Cutting Dia 30mm Shank Dia 25mm Japan Brand End Mill

1pcs HSS 2 Flute End Mills Cutting Dia 30mm Shank Dia 25mm Japan Brand End Mill

  • CN, China
  • Nov 3rd
10 NEW 1/8" SHANK CARBIDE END MILLS. 4 FLUTE. BALL. USA MADE. {J709}

10 NEW 1/8" SHANK CARBIDE END MILLS. 4 FLUTE. BALL. USA MADE. {J709}

  • Mentor, Ohio, United States
  • Nov 3rd
1pcs HSS 2 Flute End Mills Cutting Dia 28mm Shank Dia 25mm Japan Brand End Mill

1pcs HSS 2 Flute End Mills Cutting Dia 28mm Shank Dia 25mm Japan Brand End Mill

  • CN, China
  • Nov 3rd
Niagara End Mill N76602 Carbide 4 Flute Chamfer 1/2 TiAIN coated 90 Degree USA

Niagara End Mill N76602 Carbide 4 Flute Chamfer 1/2 TiAIN coated 90 Degree USA

  • Oroville, California, United States
  • Nov 3rd

People who viewed this item also vieved

Slugger Annular Cutter 1-3/16" X 7" X 3/4"

Slugger Annular Cutter 1-3/16" X 7" X 3/4"

  • Alabaster, Alabama, United States
  • Jan 30th
Hougen Cutter 1-9/16" Rotabroach 2"

Hougen Cutter 1-9/16" Rotabroach 2"

  • Eugene, Oregon, United States
  • Jan 30th
TEC 2.522J Carbide Inserts Grade VC3 VALENITE 10 Pcs

TEC 2.522J Carbide Inserts Grade VC3 VALENITE 10 Pcs

  • Trenton, Michigan, United States
  • Jan 30th
.020 Dia Diamond Grinding Mandrel 200/240 Grit 10pcs USA Brand

.020 Dia Diamond Grinding Mandrel 200/240 Grit 10pcs USA Brand

  • Trenton, Michigan, United States
  • Jan 30th
SIX KENNAMETAL SDET43PDER8GB2 SDET1204PDERGB2 KC725M INSERT a17

SIX KENNAMETAL SDET43PDER8GB2 SDET1204PDERGB2 KC725M INSERT a17

  • Gardena, California, United States
  • Jan 30th
FIVE KENNAMETAL NB2L INSERT K68 a28

FIVE KENNAMETAL NB2L INSERT K68 a28

  • Gardena, California, United States
  • Jan 30th
29 pieceJobber length hss Fractional drill bit set + Walter Countersink set .

29 pieceJobber length hss Fractional drill bit set + Walter Countersink set .

  • Brockville, Ontario, Canada
  • Jan 30th
1pcs NOGA NB1000 Burr Handle With 10 Blades Hand Bk3010 Deburring Tool

1pcs NOGA NB1000 Burr Handle With 10 Blades Hand Bk3010 Deburring Tool

  • ???, ???, China
  • Jan 30th
Threading Die 1 1/16" -16NS

Threading Die 1 1/16" -16NS

  • Coventry, Rhode Island, United States
  • Jan 30th
Ridgid Threading Dies 7/8" - 9 UNC #48025 (NEW)

Ridgid Threading Dies 7/8" - 9 UNC #48025 (NEW)

  • San Bernardino, California, United States
  • Jan 30th
Glenbard 27/32" Hand Reamer, #350

Glenbard 27/32" Hand Reamer, #350

  • Abingdon, Maryland, United States
  • Jan 30th
3-1/2" Adjustable Shell Reamer 1-1/2" Arbor Hole

3-1/2" Adjustable Shell Reamer 1-1/2" Arbor Hole

  • Lorain, Ohio, United States
  • Jan 30th
Globus Slitting Saw Blade 6" x 1 1/4" x 42T HSS 5-747-285

Globus Slitting Saw Blade 6" x 1 1/4" x 42T HSS 5-747-285

  • Pine Bluff, Arkansas, United States
  • Jan 30th
TRW HS 0.091.Metal Slitting Blades Lot of 12

TRW HS 0.091.Metal Slitting Blades Lot of 12

  • Pine Bluff, Arkansas, United States
  • Jan 30th
HQ 5 pcs 1/8'' Aluminum endmill one flute spiral CNC router bits 3.175mm x8mm

HQ 5 pcs 1/8'' Aluminum endmill one flute spiral CNC router bits 3.175mm x8mm

  • Shandong, China
  • Jan 30th
Weldon Tool Co. CS-26 82 degree Countersink HSS range: .3070 - 25/32

Weldon Tool Co. CS-26 82 degree Countersink HSS range: .3070 - 25/32

  • Braselton, Georgia, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies