+ Post new Ad
4" 5C 3 Jaw Lathe self-centering chuck - In Box, with both sets jaws & key, US $1400 – Picture 0
4" 5C 3 Jaw Lathe self-centering chuck - In Box, with both sets jaws & key, US $1400 – Picture 0

4" 5c 3 Jaw Lathe Self-centering Chuck - In Box, With Both Sets Jaws & Key

US $1400

  • Ballwin, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
This 4" 5c three-jaw chuck was purchased to be used with a lathe that did not survive a bad shipping accident (the chuck was NOT in the accident...), and thus has never been used. It appears to be pretty nice. It has the original packing/shipping material, both sets of inside/outside jaws, and the chuck key.    If you have a 5c collet puller,  you NEED one of these. If you've never used one, and are used to pulling off your collet stuff, and messing with various chucks, you won't believe the time and hassle you save. If you don't have one, now's your chance. If you have questions, please feel free to email us. We're starting the auction at a low price, so bid and enjoy using this nice tool.   We're trying to keep things simple, so we'll just sell to USA addresses, and this will likely go out in a USPS flat rate box. Keep an eye on our other stuff, because we can combine shipping - we are NOT in the shipping business. Pickup (no delivery) _may_ be possible if you want to drive into South City in St. Louis. Sorry - no returns - we're not going to be able to deal with that in this situation. Thank you for looking.
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Box was opened, and the chuck was removed from the box and admired. It has not been used.”

Directions

Similar products from Lathe Chucks

Sine Plates 6"x6"x2", Center Distance 5"x0.0002", HRC 56-60, Ground, #2591-0000

Sine Plates 6"x6"x2", Center Distance 5"x0.0002", HRC 56-60, Ground, #2591-0000

  • Toronto, ON, Canada
  • Jan 30th
South Bend Skinner 10" 4 -Jaw Indendent Chuck # 4210

South Bend Skinner 10" 4 -Jaw Indendent Chuck # 4210

  • Hayward, California, United States
  • Jan 30th
NORTHFIELD AIR CHUCK ADAPTER PLATE FOR A2-6 CNC LATHE SPINDLE NOSE

NORTHFIELD AIR CHUCK ADAPTER PLATE FOR A2-6 CNC LATHE SPINDLE NOSE

  • Isanti, Minnesota, United States
  • Jan 30th
NORTHFILED AIR CHUCK MOUNTNG PLATE FOR HARDINGE 5C THREADED NOSE

NORTHFILED AIR CHUCK MOUNTNG PLATE FOR HARDINGE 5C THREADED NOSE

  • Isanti, Minnesota, United States
  • Jan 30th
Like new SANDVIK Boring Head, C5-391.37A-12048A Capto

Like new SANDVIK Boring Head, C5-391.37A-12048A Capto

  • valleyfield, Canada
  • Jan 30th
UNUSED 60" 4-JAW FACE PLATE CHUCK FOR LATHE / VTL PLAIN BACK W/ T-SLOTS

UNUSED 60" 4-JAW FACE PLATE CHUCK FOR LATHE / VTL PLAIN BACK W/ T-SLOTS

  • Cleveland, Ohio, United States
  • Jan 30th
NEW ATLAS PRATT BURNERED 16 INCH 4 JAW CHUCK LEBLOND CLAUSING MAKINO INDEPENDENT

NEW ATLAS PRATT BURNERED 16 INCH 4 JAW CHUCK LEBLOND CLAUSING MAKINO INDEPENDENT

  • Lake Orion, Michigan, United States
  • Jan 30th
12 inch Huron Aluminum soft pie chuck jaws A-12-MSH-FG 12" diameter 3 jaw chuck

12 inch Huron Aluminum soft pie chuck jaws A-12-MSH-FG 12" diameter 3 jaw chuck

  • Fort Lauderdale, Florida, United States
  • Jan 30th
Jacobs 58B Spindle Chuck 1-1/2" - 8TPI 1/8"-5/8" Capacity

Jacobs 58B Spindle Chuck 1-1/2" - 8TPI 1/8"-5/8" Capacity

  • Great Falls, Montana, United States
  • Jan 30th
Manufacturers label unreadable

Manufacturers label unreadable

  • Berryville, Virginia, United States
  • Jan 30th
WINDSOR LOCKS CO. 15" 4 JAW LATHE CHUCK L1 MOUNT

WINDSOR LOCKS CO. 15" 4 JAW LATHE CHUCK L1 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
Miniature grinding head for small lathes, Unimat?

Miniature grinding head for small lathes, Unimat?

  • Leicestershire, United Kingdom
  • Jan 30th
Miniature slitting saw and mandrel for small lathes and milling machine, Unimat?

Miniature slitting saw and mandrel for small lathes and milling machine, Unimat?

  • Leicestershire, United Kingdom
  • Jan 30th
Bison 3 Jaw Chuck 2-3/8" For Sherline Lathe

Bison 3 Jaw Chuck 2-3/8" For Sherline Lathe

  • San Jose, California, United States
  • Jan 30th
JACOBS SPINDLE NOSE LATHE CHUCK L1 MOUNT

JACOBS SPINDLE NOSE LATHE CHUCK L1 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
Jacobs #34 drill chuck with Key

Jacobs #34 drill chuck with Key

  • New Carlisle, Indiana, United States
  • Jan 30th
Mixed lot Vintage old Tool Threaded Specialty Chucks/Metal Lathe/Milling Machine

Mixed lot Vintage old Tool Threaded Specialty Chucks/Metal Lathe/Milling Machine

  • Stroudsburg, Pennsylvania, United States
  • Jan 30th
Bison 3-Jaw Lathe Chuck . 5". Excellent Condition. Satisfaction Guaranteed

Bison 3-Jaw Lathe Chuck . 5". Excellent Condition. Satisfaction Guaranteed

  • Fairfield, Pennsylvania, United States
  • Jan 30th
Abbott Aluminum 3-Pie-Jaw 8" Chuck Lathe Back-Plate MDR PUUm-S8A5ZD

Abbott Aluminum 3-Pie-Jaw 8" Chuck Lathe Back-Plate MDR PUUm-S8A5ZD

  • Leander, Texas, United States
  • Jan 30th
Kitagawa B210, 10" 3-Jaw Hydraulic Chuck - #0787

Kitagawa B210, 10" 3-Jaw Hydraulic Chuck - #0787

  • Dundee, Florida, United States
  • Jan 30th

People who viewed this item also vieved

Hardinge Coupling Top Plate TT001179212T

Hardinge Coupling Top Plate TT001179212T

  • Waukesha, Wisconsin, United States
  • Jun 1st
ECLPISE MACHINIST ANGLE PLATE , 4 3/8" x 5" x 6"

ECLPISE MACHINIST ANGLE PLATE , 4 3/8" x 5" x 6"

  • Berlin, Connecticut, United States
  • Jun 1st
Machinist sine plate 5"

Machinist sine plate 5"

  • New Britain, Connecticut, United States
  • Jun 1st
STRAIGHT TYPE TURNING TOOL HOLDER WITH 1/2" TOOL BIT

STRAIGHT TYPE TURNING TOOL HOLDER WITH 1/2" TOOL BIT

  • DELHI, DELHI, India
  • Jun 3rd
STRAIGHT TYPE TURNING TOOL HOLDER WITH 3/8" TOOL BIT

STRAIGHT TYPE TURNING TOOL HOLDER WITH 3/8" TOOL BIT

  • DELHI, DELHI, India
  • Jun 3rd
STRAIGHT TYPE TURNING TOOL HOLDER WITH 5/16" TOOL BIT

STRAIGHT TYPE TURNING TOOL HOLDER WITH 5/16" TOOL BIT

  • DELHI, DELHI, India
  • Jun 3rd
OTM Stinger Drill 20mm SDR20MM

OTM Stinger Drill 20mm SDR20MM

  • Johnson City, New York, United States
  • Jun 4th
Hardinge 5C Round Smooth Collet with No Internal Stop Thread, 0.964" Hole Size

Hardinge 5C Round Smooth Collet with No Internal Stop Thread, 0.964" Hole Size

  • Wooster, Ohio, United States
  • Jun 4th
5c Collets - Lot of 65 - Hardinge and Other Brands

5c Collets - Lot of 65 - Hardinge and Other Brands

  • Humboldt, Arizona, United States
  • Jun 4th
Starrett 161A Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

Starrett 161A Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

  • USA, United States
  • Jun 5th
JH Williams Vulcan No 6 Heavy Service C Clamp Bridge Welding 6 1/2" Opening

JH Williams Vulcan No 6 Heavy Service C Clamp Bridge Welding 6 1/2" Opening

  • Van Buren, Ohio, United States
  • Jun 5th
Pair of Heavy Service Industrial 2 1/2" Opening C, Beam Clamps

Pair of Heavy Service Industrial 2 1/2" Opening C, Beam Clamps

  • Douglassville, Pennsylvania, United States
  • Jun 5th
11 x 2.5 x 1.5" Oversized (Extension) Aluminum Soft Jaws for 6" Vise

11 x 2.5 x 1.5" Oversized (Extension) Aluminum Soft Jaws for 6" Vise

  • Chatsworth, California, United States
  • Jun 6th
GERARDI 3.03.20000 6' Milling Vise

GERARDI 3.03.20000 6' Milling Vise

  • Duncan, South Carolina, United States
  • Jun 6th
WILTON 11703 Super Precision 2 Way Angular Machine Vise

WILTON 11703 Super Precision 2 Way Angular Machine Vise

  • Duncan, South Carolina, United States
  • Jun 6th
FISHER MACHINE Universal Magnetic Chuck V-Block ~ Machinist/Lathe/Grinder/U.S.A.

FISHER MACHINE Universal Magnetic Chuck V-Block ~ Machinist/Lathe/Grinder/U.S.A.

  • Twinsburg, Ohio, United States
  • Jun 18th
Machinist Blocks (2)

Machinist Blocks (2)

  • Cherry Hill, New Jersey, United States
  • Jun 18th
Brown & Sharpe V-Block No. 750-B No. 11 - Machinist Tool 750

Brown & Sharpe V-Block No. 750-B No. 11 - Machinist Tool 750

  • Murfreesboro, Tennessee, United States
  • Jun 19th
"Basix Fixed Circular Needles 24""-Size 8/5mm"

"Basix Fixed Circular Needles 24""-Size 8/5mm"

  • Hickory Hills, Illinois, United States
  • Jun 21st
"Hero Arts Clear Stamps By Lia 4""X6""-Friends"

"Hero Arts Clear Stamps By Lia 4""X6""-Friends"

  • Hickory Hills, Illinois, United States
  • Jun 21st
"Knitting Needles 14""-Size 8/5.00mm"

"Knitting Needles 14""-Size 8/5.00mm"

  • Hickory Hills, Illinois, United States
  • Jun 21st
troyke precision horizonal rotary table

troyke precision horizonal rotary table

  • Lee's Summit, Missouri, United States
  • Oct 23rd
Tsudakoma RB-300R 12in 4TH Axis Rotary Table with Tailstock

Tsudakoma RB-300R 12in 4TH Axis Rotary Table with Tailstock

  • Suwanee, Georgia, United States
  • Oct 24th
SMW RT5C Indexer w/ System 30T/50 Control

SMW RT5C Indexer w/ System 30T/50 Control

  • Reno, Nevada, United States
  • Oct 24th
JERGENS #43502 1/4-20 Plain Toggle Pad Made in USA

JERGENS #43502 1/4-20 Plain Toggle Pad Made in USA

  • Crystal Lake, Illinois, United States
  • Oct 28th
JERGENS #43703 5/16-18 Carbide Insert Grip Toggle Pad Made in USA

JERGENS #43703 5/16-18 Carbide Insert Grip Toggle Pad Made in USA

  • Crystal Lake, Illinois, United States
  • Oct 28th
J H Williams Homecraft NO. 0-RH Metal Lathe Tool Holder W/ 1/4" Bit Right Hand

J H Williams Homecraft NO. 0-RH Metal Lathe Tool Holder W/ 1/4" Bit Right Hand

  • Fort Myers, Florida, United States
  • Oct 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies