+ Post new Ad
( 4-pcs for 50.00 ) Kakuta #HV-551-B Hold Down Clamp Straight Base, US $182 – Picture 0
( 4-pcs for 50.00 ) Kakuta #HV-551-B Hold Down Clamp Straight Base, US $182 – Picture 0

( 4-pcs For 50.00 ) Kakuta #hv-551-b Hold Down Clamp Straight Base

US $182

  • National City, California, United States
  • May 25th
Open on mobile:
QR code
 You will receive 4-pcs of a Kakuta Hold down clamp #HV-551-B Holding cap 750 lbs Handle moves 65 degrees Bar moves 93 degrees Comes with red handle and bolt retainer New in the bag with free shipping for 50.00   Free expedited shipping to the 48 u.s. contiguous states only , if you live in California you will have to pay 9 % sales tax .

Directions

Similar products from Clips & Jaws

( 5 pcs for 175.00 ) Destaco # 807-cyl Pneumatic Hold Down Clamp

( 5 pcs for 175.00 ) Destaco # 807-cyl Pneumatic Hold Down Clamp

  • National City, California, United States
  • May 25th
C- CLAMPS HEAVY DUTY 3 INCH 4 PCS !

C- CLAMPS HEAVY DUTY 3 INCH 4 PCS !

  • Northvale, New Jersey, United States
  • May 25th
MACHINIST TOOLS LATHE MILL Machinist Lot Angle Clamp s

MACHINIST TOOLS LATHE MILL Machinist Lot Angle Clamp s

  • Morris Plains, New Jersey, United States
  • May 25th
ARMSTRONG 6" C-CLAMP PART NUMBER 78-106

ARMSTRONG 6" C-CLAMP PART NUMBER 78-106

  • Pensacola, Florida, United States
  • May 25th
4 VINTAGE MACHINIST PARALLEL CLAMPS possibly brown and sharpe not marked

4 VINTAGE MACHINIST PARALLEL CLAMPS possibly brown and sharpe not marked

  • Bellmawr, New Jersey, United States
  • May 25th
VRARE HUGE ARMSTRONG No.1408 HEAVY DUTY 8" C CLAMP MADE IN USA CHICAGO HEAVY

VRARE HUGE ARMSTRONG No.1408 HEAVY DUTY 8" C CLAMP MADE IN USA CHICAGO HEAVY

  • Lucas, Ohio, United States
  • May 25th
BRINK & COTTON 6" FORGED STEEL C CLAMP 406 NICE CLEAN CLAMPS USA MADE.

BRINK & COTTON 6" FORGED STEEL C CLAMP 406 NICE CLEAN CLAMPS USA MADE.

  • Denver, Pennsylvania, United States
  • May 25th
Destaco 871 Pneumatic Hold Down Clamp

Destaco 871 Pneumatic Hold Down Clamp

  • National City, California, United States
  • May 25th
Destaco Straight Line -Variable Stroke Clamp Model FO-120

Destaco Straight Line -Variable Stroke Clamp Model FO-120

  • National City, California, United States
  • May 25th
BRASS Earth,ground clamp.Welding earth,ground clamp 400AMP.NEW!!!

BRASS Earth,ground clamp.Welding earth,ground clamp 400AMP.NEW!!!

  • Pazardzhik, Pazardzhik, Bulgaria
  • May 25th
Mathey Dearman D249SS Double Jackscrew Chain Clamp Stainless Steel

Mathey Dearman D249SS Double Jackscrew Chain Clamp Stainless Steel

  • Mooresburg, Tennessee, United States
  • May 25th
DE STA CO Model # 210-U Vertical Hold-Down Clamp 1pc.

DE STA CO Model # 210-U Vertical Hold-Down Clamp 1pc.

  • Redford, Michigan, United States
  • May 24th
16 - Toggle Clamps

16 - Toggle Clamps

  • Monterey, California, United States
  • May 24th
Williams FJ-30 Industrial Pipe Line Separator Flange Jack ~Refurbished~

Williams FJ-30 Industrial Pipe Line Separator Flange Jack ~Refurbished~

  • Denver, Colorado, United States
  • May 24th
Mill clamp assortment, hold down, heel clamp, step block, 30+ pcs., heavy duty

Mill clamp assortment, hold down, heel clamp, step block, 30+ pcs., heavy duty

  • Minneapolis, Minnesota, United States
  • May 24th
MERRILL BROTHERS 1 TON CLAMP WITH RING

MERRILL BROTHERS 1 TON CLAMP WITH RING

  • Goffstown, New Hampshire, United States
  • May 24th
Billings Heavy Service 1-1/2" C-Clamp

Billings Heavy Service 1-1/2" C-Clamp

  • Greenville, Pennsylvania, United States
  • May 24th
MITEE-BITE PRODUCTS INC 31350 Fixture Clamp, ID Xpansn#6, 5/8-11, 1-3/4in, @2B@

MITEE-BITE PRODUCTS INC 31350 Fixture Clamp, ID Xpansn#6, 5/8-11, 1-3/4in, @2B@

  • Saint Louis, Missouri, United States
  • May 24th
MACHINIST TOOLS LATHE MILL Machinist Lot of Parallel Clamps for Hold Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of Parallel Clamps for Hold Set Up

  • Morris Plains, New Jersey, United States
  • May 24th
Westward Heavy-Duty Tradesman's Vise 5" Ductile Iron 3-3/8" Throat Depth

Westward Heavy-Duty Tradesman's Vise 5" Ductile Iron 3-3/8" Throat Depth

  • Loves Park, Illinois, United States
  • May 24th

People who viewed this item also vieved

Machine part lathe grinder cutter center indexing index balance holder alignment

Machine part lathe grinder cutter center indexing index balance holder alignment

  • Greenville, South Carolina, United States
  • Jan 30th
Scoda MT4 live center

Scoda MT4 live center

  • Porterville, California, United States
  • Jan 30th
HURON # 3 Live Center for Lathe, #3 Morse Taper, Carbide Tipped, Smooth Bearing

HURON # 3 Live Center for Lathe, #3 Morse Taper, Carbide Tipped, Smooth Bearing

  • Saint Clair, Michigan, United States
  • Jan 30th
SHARS 12" 3 JAW SCROLLING CHUCK FLAT BACK 3.5" HOLE

SHARS 12" 3 JAW SCROLLING CHUCK FLAT BACK 3.5" HOLE

  • Ellington, New York, United States
  • Jan 30th
ERICKSON FORKARDT GERMANY 12" 3 JAW SCROLLING CHUCK

ERICKSON FORKARDT GERMANY 12" 3 JAW SCROLLING CHUCK

  • Ellington, New York, United States
  • Jan 30th
CUSHMAN 12" 3 JAW SCROLLING CHUCK W/ WRENCH

CUSHMAN 12" 3 JAW SCROLLING CHUCK W/ WRENCH

  • Ellington, New York, United States
  • Jan 30th
HARDINGE 5C INTERNAL THREADS COLLET 13/64

HARDINGE 5C INTERNAL THREADS COLLET 13/64

  • Norwood, Massachusetts, United States
  • Jan 30th
HARDINGE 5C INTERNAL THREADS COLLET 37/64 (REF # 29A)

HARDINGE 5C INTERNAL THREADS COLLET 37/64 (REF # 29A)

  • Norwood, Massachusetts, United States
  • Jan 30th
HARDINGE 5C INTERNAL THREADS COLLET 1/16 (REF # 41A)

HARDINGE 5C INTERNAL THREADS COLLET 1/16 (REF # 41A)

  • Norwood, Massachusetts, United States
  • Jan 30th
5C ANGLE END MILL GRINDING FIXTURE

5C ANGLE END MILL GRINDING FIXTURE

  • Garden Grove, California, United States
  • Jan 30th
HOLIDAY SPECIAL 5C PRECISION SPIN INDEX FIXTURE COLLET FOR MILLING

HOLIDAY SPECIAL 5C PRECISION SPIN INDEX FIXTURE COLLET FOR MILLING

  • Garden Grove, California, United States
  • Jan 30th
84" x 212" CINCINNATI-MILACRON VACUUM LAYOUT TABLE - #24598

84" x 212" CINCINNATI-MILACRON VACUUM LAYOUT TABLE - #24598

  • Cincinnati, Ohio, United States
  • Jan 30th
SCHUNK REDUCTION SLEEVE TRIBOS 201972 SRE S 6 88MM OD 10MM ID (LOC1236A) TS12

SCHUNK REDUCTION SLEEVE TRIBOS 201972 SRE S 6 88MM OD 10MM ID (LOC1236A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
SCHUNK REDUCTION SLEEVE 201998 SRE S 32 88MM OD 45MM ID (LOC1236A) TS12

SCHUNK REDUCTION SLEEVE 201998 SRE S 32 88MM OD 45MM ID (LOC1236A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
DORIAN SD40CA superquick change Tool Holder Series CA manual lathe leblond

DORIAN SD40CA superquick change Tool Holder Series CA manual lathe leblond

  • Warren, Michigan, United States
  • Jan 30th
SHOP FOX 4-1/8" x 90 DEGREE ADJ ANGLE VISE 15 DEG INDEX 3-3/4" CAP NEW D2933

SHOP FOX 4-1/8" x 90 DEGREE ADJ ANGLE VISE 15 DEG INDEX 3-3/4" CAP NEW D2933

  • Jacksonville, Florida, United States
  • Jan 30th
3-1/2" INCH ULTRA PRECISION TOOLMAKER'S VISE

3-1/2" INCH ULTRA PRECISION TOOLMAKER'S VISE

  • San Bernardino, California, United States
  • Jan 30th
Bridgeport Vise with Swivel Base (Inv.26265)

Bridgeport Vise with Swivel Base (Inv.26265)

  • Portland, Connecticut, United States
  • Jan 30th
Cincinnati Milling Machine Tailstock

Cincinnati Milling Machine Tailstock

  • Suffern, New York, United States
  • Feb 25th
Sterrett #129 Bench Block machinist tool

Sterrett #129 Bench Block machinist tool

  • San Ramon, California, United States
  • Feb 27th
BROWN & SHARPE 12 Piece Precision Angle Block Set, Dimensions: 3"L X 1/4"T

BROWN & SHARPE 12 Piece Precision Angle Block Set, Dimensions: 3"L X 1/4"T

  • Moneta, Virginia, United States
  • Feb 27th
20 Piece Tap and Die Set ETC in case used work well

20 Piece Tap and Die Set ETC in case used work well

  • Hemet, California, United States
  • Feb 27th
JOHN RAMMING MACHINE CO CROSS SLIDE ROTARY TABLE11"x11" B-11 Milling Accessories

JOHN RAMMING MACHINE CO CROSS SLIDE ROTARY TABLE11"x11" B-11 Milling Accessories

  • Woodstock, Illinois, United States
  • Feb 27th
Haas HRT310 Rotary Table P1

Haas HRT310 Rotary Table P1

  • Linthicum Heights, Maryland, United States
  • Feb 27th
5C Collet Block Chuck Set 5 C

5C Collet Block Chuck Set 5 C

  • Mansfield, Massachusetts, United States
  • Mar 2nd
ETM Precision Collet Chuck, 1" Shank - uses ER 32 Collets; some collets included

ETM Precision Collet Chuck, 1" Shank - uses ER 32 Collets; some collets included

  • Rocky Point, New York, United States
  • Mar 2nd
KAL INDUSTRIES 5C COLLET SPINNING FIXTURE

KAL INDUSTRIES 5C COLLET SPINNING FIXTURE

  • Livonia, Michigan, United States
  • Mar 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies