+ Post new Ad
4 PCS YG1 1/8" CARBIDE ENDMILL 08558TF AlTiN/TiAIN 4 FLUTES, US $60.00 – Picture 0
4 PCS YG1 1/8" CARBIDE ENDMILL 08558TF AlTiN/TiAIN 4 FLUTES, US $60.00 – Picture 0

4 Pcs Yg1 1/8" Carbide Endmill 08558tf Altin/tiain 4 Flutes

US $60.00

  • Overland Park, Kansas, United States
  • Jan 30th
Open on mobile:
QR code
YG-1 08558TF Carbide Square Nose End Mill, Inch, Long Length, TiAlN Finish, 30 Degree Helix, 4 Flutes, 2.25-Inch Overall Length, 0.125-Inch Cutting Diameter, 0.125-Inch Shank Diameter Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron Four flutes produce a better finish than fewer flutes Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material Carbide
Cutting Diameter 1/8in.
Coating AlTiN/TiAIN
Shank Diameter 1/8in.
Brand YG1
Overall Length 2-1/4in.
Flutes 4-Flute
Quantity 1

Directions

Similar products from End Mills Router & Drill Bits

Lot Of 3 New Osg Tap & Die Tialn Coated End Mills 9/32" 11/32" (3/8" Stub)

Lot Of 3 New Osg Tap & Die Tialn Coated End Mills 9/32" 11/32" (3/8" Stub)

  • United States
  • Jan 30th
NEW ACCUPRO 1/4" Carbide End Mills (QTY: 2 )

NEW ACCUPRO 1/4" Carbide End Mills (QTY: 2 )

  • Columbus, Nebraska, United States
  • Jan 30th
2 1/2" HS End Mill

2 1/2" HS End Mill

  • East Hampton, New York, United States
  • Jan 30th
11 lbs. Scrap Carbide End Mills

11 lbs. Scrap Carbide End Mills

  • United States
  • Jan 30th
3MM X 35MM 2-FLUTE HRC40 CUTTING SOLID CARBIDE FLAT ENDMILL -10x

3MM X 35MM 2-FLUTE HRC40 CUTTING SOLID CARBIDE FLAT ENDMILL -10x

  • --, Hong Kong
  • Jan 30th
3 PCS YG1 1/2" Carbide ENDMILL 02593TF AlTiN/TiAIN 4in OAL qty

3 PCS YG1 1/2" Carbide ENDMILL 02593TF AlTiN/TiAIN 4in OAL qty

  • Overland Park, Kansas, United States
  • Jan 30th
3/4 and 7/16 Finish end mill Quinco HSS For mill machine, machist tools

3/4 and 7/16 Finish end mill Quinco HSS For mill machine, machist tools

  • Bloomington, California, United States
  • Jan 30th
1-1/4x1" Cobalt Anular Cutting Broach

1-1/4x1" Cobalt Anular Cutting Broach

  • Auburn, Maine, United States
  • Jan 30th
MACHINIST LATHE MILL TOOL NICE ASSORTED LOT OF 54 END MILLS 33 single 21 double

MACHINIST LATHE MILL TOOL NICE ASSORTED LOT OF 54 END MILLS 33 single 21 double

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
Accupro solid carbide 1/4" coated endmill

Accupro solid carbide 1/4" coated endmill

  • Conesus, New York, United States
  • Jan 30th
Putnam GreenField 3/16 End Mill 94832 3/16 x 3/8

Putnam GreenField 3/16 End Mill 94832 3/16 x 3/8

  • New Richmond, Wisconsin, United States
  • Jan 30th
4 PCS YG1 02573TF 1/4" Carbide End Mill

4 PCS YG1 02573TF 1/4" Carbide End Mill

  • Overland Park, Kansas, United States
  • Jan 30th
SGS CARBIDE ENDMILL LOT OF 34 NIB ENDMILLS!!!NICE LOT!!!

SGS CARBIDE ENDMILL LOT OF 34 NIB ENDMILLS!!!NICE LOT!!!

  • Westfield, Pennsylvania, United States
  • Jan 30th
AWESOME DEAL Carbide End Mill Lot (7) 1/2" 3/8" 1/4" 5/16" Precision CNC NEW

AWESOME DEAL Carbide End Mill Lot (7) 1/2" 3/8" 1/4" 5/16" Precision CNC NEW

  • Muskego, Wisconsin, United States
  • Jan 30th
3.5MM X 50MM 4-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL

3.5MM X 50MM 4-FLUTE HRC55 CENTER CUTTING AlTiN/TiAIN CARBIDE FLAT ENDMILL

  • --, Hong Kong
  • Jan 30th
4 SOLID CARBIDE END MILLS CUTTERS *FREE SHIPPING* machinist tools *9

4 SOLID CARBIDE END MILLS CUTTERS *FREE SHIPPING* machinist tools *9

  • Thomaston, Connecticut, United States
  • Jan 30th
OSG 1.50mm Cobalt End Mill

OSG 1.50mm Cobalt End Mill

  • Fort Worth, Texas, United States
  • Jan 30th
Richards 7/64" Solid Carbide End Mill

Richards 7/64" Solid Carbide End Mill

  • Fort Worth, Texas, United States
  • Jan 30th
Harvey Tool Keyseat cutter 1/4" diameter 1/32nd wide p/n 970031

Harvey Tool Keyseat cutter 1/4" diameter 1/32nd wide p/n 970031

  • Conesus, New York, United States
  • Jan 30th
Harvey Tool Keyseat cutter 1/4" dia x 1/16" cutter width 14716-62

Harvey Tool Keyseat cutter 1/4" dia x 1/16" cutter width 14716-62

  • Conesus, New York, United States
  • Jan 30th

People who viewed this item also vieved

ISCAR FACE MILL-FF FW D-50-22-09-C + 30pcs FF WOMT 09T320T IC 928

ISCAR FACE MILL-FF FW D-50-22-09-C + 30pcs FF WOMT 09T320T IC 928

  • SU, Serbia
  • Jan 30th
10pc Sumitomo SNMG 543 ENZ AC2000 coated carbide inserts

10pc Sumitomo SNMG 543 ENZ AC2000 coated carbide inserts

  • Hamburg, New York, United States
  • Jan 30th
RNGN 45 A 120700E CC680 SANDVIK CERAMIC INSERTS

RNGN 45 A 120700E CC680 SANDVIK CERAMIC INSERTS

  • Minneapolis, Minnesota, United States
  • Jan 30th
RNGA 1906T 64 T .009X20 KENNAMETAL CERAMIC INSERTS

RNGA 1906T 64 T .009X20 KENNAMETAL CERAMIC INSERTS

  • Minneapolis, Minnesota, United States
  • Jan 30th
NEW INVOLUTE GEAR CUTTER #6 14P 14.5PA 1"bore CHINA UNUSED OLD STOCK

NEW INVOLUTE GEAR CUTTER #6 14P 14.5PA 1"bore CHINA UNUSED OLD STOCK

  • Kelly, North Carolina, United States
  • Jan 30th
Gear Shaper

Gear Shaper

  • Trenton, Michigan, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA PUNCH & DIE CE TOOL .420 x .500 RT +.009 E13

STRIPPIT Nisshinbo AMADA PUNCH & DIE CE TOOL .420 x .500 RT +.009 E13

  • Lake Worth, Florida, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA Thin Turret PUNCH DIE WILSON .175 X .500 OB +.012 S4

STRIPPIT Nisshinbo AMADA Thin Turret PUNCH DIE WILSON .175 X .500 OB +.012 S4

  • Lake Worth, Florida, United States
  • Jan 30th
1 5/8 PEERLESS EXPANSION REAMER HIGH SPEED (2) AVAILABLE, lot of 1pcs.

1 5/8 PEERLESS EXPANSION REAMER HIGH SPEED (2) AVAILABLE, lot of 1pcs.

  • Elmwood Park, Illinois, United States
  • Jan 30th
1/6" Solid Carbide Straight Flute Chucking Reamer, MSC #02195048

1/6" Solid Carbide Straight Flute Chucking Reamer, MSC #02195048

  • Abingdon, Maryland, United States
  • Jan 30th
Olson Band Saw Blade 72" Thin Kerf 1/4" width

Olson Band Saw Blade 72" Thin Kerf 1/4" width

  • Munster, Indiana, United States
  • Jan 30th
Olson Band Saw Blade 72" Thin Kerf 1/4"

Olson Band Saw Blade 72" Thin Kerf 1/4"

  • Munster, Indiana, United States
  • Jan 30th
(5)Countersink Bits Machinist Gunsmith Toolmaker Milling Tool- FORD, CLEVELAND

(5)Countersink Bits Machinist Gunsmith Toolmaker Milling Tool- FORD, CLEVELAND

  • Kalamazoo, Michigan, United States
  • Jan 30th
ER11 A type Wrench for Clamping Nut CNC Milling Lathe

ER11 A type Wrench for Clamping Nut CNC Milling Lathe

  • china, China
  • Jan 30th
duMont 5/16 Square Broach - 21/64 pilot - Good - Machinist Tool, Broaching

duMont 5/16 Square Broach - 21/64 pilot - Good - Machinist Tool, Broaching

  • Camarillo, California, United States
  • Feb 22nd
5 Roto Broach Annular Cutting Bits 1-5/8x1 Thru 1-3/4x2 Hougen Unibor

5 Roto Broach Annular Cutting Bits 1-5/8x1 Thru 1-3/4x2 Hougen Unibor

  • Auburn, Maine, United States
  • Feb 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies