+ Post new Ad
4 Vintage STARRETT MACHINIST'S Tools ~ 6” RULE, 12” Combination SQUARE, Level+, US $110 – Picture 0
4 Vintage STARRETT MACHINIST'S Tools ~ 6” RULE, 12” Combination SQUARE, Level+, US $110 – Picture 0

4 Vintage Starrett Machinist's Tools ~ 6” Rule, 12” Combination Square, Level+

US $110

  • Huntington Beach, California, United States
  • Jul 20th
Open on mobile:
QR code
4  Vintage Machinist Tools ~  L. S. Starrett 6” Rule, 12” Square, Level You are bidding on four vintage Machinist Tools.  All are L.S. Starrett.  They are as follows:  6  inch Rule No.  C606R.  It has a hole at either end.  One side is clean and without damage.  The other side is stained and pitted. It is fully marked with Starrett information. It additionally is marked Tempered.    The second tool is a 12 inch combination square.  It is missing its scribe and its bubble level.  It is marked No. 4 Grad.  Some staining.  Made in U.S.A.  Marked Hardened. Blade is straight.   Slide is monogrammed CLOK.  The third item is a cast iron level.  It is monogrammed CLOK.  It appears to be cast iron.  It is marked with Starrett information.  Functional.  The fourth item is a 6 inch layout tool.  It acts as a pair of dividers.  One leg is very sharp and the other is a curved leg.  It can as an interior or exterior gauge.  It is monogrammed CLOK. All four pieces are made in the U.S.A.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Item Type Combination Square
Brand L.S. Starrett
MPN Does not apply

Directions

Similar products from Measuring Squares

STARRETT H33-1224 Square Head,Steel,Smooth Finish

STARRETT H33-1224 Square Head,Steel,Smooth Finish

  • Minooka, Illinois, United States
  • Jul 20th
STARRETT #33H-6-4R COMBINATION SQUARE WITH SQUARE HEAD

STARRETT #33H-6-4R COMBINATION SQUARE WITH SQUARE HEAD

  • Athol, Massachusetts, United States
  • Jul 20th
STARRETT #C33H-6-4R COMBINATION SQUARE WITH SQUARE HEAD

STARRETT #C33H-6-4R COMBINATION SQUARE WITH SQUARE HEAD

  • Athol, Massachusetts, United States
  • Jul 20th
STARRETT #C33C-12-4R COMBINATION SQUARE WITH CENTER HEAD ONLY

STARRETT #C33C-12-4R COMBINATION SQUARE WITH CENTER HEAD ONLY

  • Athol, Massachusetts, United States
  • Jul 20th
Mitutoyo ABSOLUTE 543-782B Digimatic Indicator ID-S Series 543 JAPAN

Mitutoyo ABSOLUTE 543-782B Digimatic Indicator ID-S Series 543 JAPAN

  • Cumming, Georgia, United States
  • Jul 20th
CENTRAL TOOLS 6091 CONVENTIONAL 4-5 INCH MICROMETER USA

CENTRAL TOOLS 6091 CONVENTIONAL 4-5 INCH MICROMETER USA

  • Cumming, Georgia, United States
  • Jul 20th
Scherr Tumico 12" Hardened Blade No 3033-12 With Protractor Head,Machinist Tool

Scherr Tumico 12" Hardened Blade No 3033-12 With Protractor Head,Machinist Tool

  • La Puente, California, United States
  • Jul 20th
AnNafi Centering Square Finder Center Finder CTR1 1/2 inch

AnNafi Centering Square Finder Center Finder CTR1 1/2 inch

  • US, United States
  • Jul 20th
Snap-On Square12

Snap-On Square12

  • Littleton, Colorado, United States
  • Jul 20th
Vintage Brown and Sharp Precision Machinist 6” Carpenter Square Wood Box #540

Vintage Brown and Sharp Precision Machinist 6” Carpenter Square Wood Box #540

  • Nazareth, Pennsylvania, United States
  • Jul 20th
Starrett Combination Square 5pcs Head,protractor,center finder, 24"rule & scribe

Starrett Combination Square 5pcs Head,protractor,center finder, 24"rule & scribe

  • Browns Mills, New Jersey, United States
  • Jul 20th
Scherr Tumico 18" Hardened Blade No 3033-18 With Protractor Head,Machinist Tool

Scherr Tumico 18" Hardened Blade No 3033-18 With Protractor Head,Machinist Tool

  • La Puente, California, United States
  • Jul 19th
SHINWA 15cm 150mm Stainless Steel Ruler Scale with Magnet for Work F/S w/Track#

SHINWA 15cm 150mm Stainless Steel Ruler Scale with Magnet for Work F/S w/Track#

  • Japan, Japan
  • Jul 19th
AnNafi Engineers Square Set 4 Piece (2, 3, 4 & 6 Inch) In Wooden Case On Auction

AnNafi Engineers Square Set 4 Piece (2, 3, 4 & 6 Inch) In Wooden Case On Auction

  • DELHI, DELHI, India
  • Jul 19th
STARRETT No. 20, (4-1/2") Machinist's / Toolmaker's Square, Made in USA

STARRETT No. 20, (4-1/2") Machinist's / Toolmaker's Square, Made in USA

  • Saunderstown, Rhode Island, United States
  • Jul 19th
300mm/12 inch Engineers Square - Moore and Wright

300mm/12 inch Engineers Square - Moore and Wright

  • Miami, Florida, United States
  • Jul 19th
Starrett 4 Pc 12" Combination Square Set Satin Chrome No Engraving Ex Cond

Starrett 4 Pc 12" Combination Square Set Satin Chrome No Engraving Ex Cond

  • Vineland, New Jersey, United States
  • Jul 19th
Vintage Moore & Wright Precision 4" Square Engineer Machinist Tool #400 LOOK n00

Vintage Moore & Wright Precision 4" Square Engineer Machinist Tool #400 LOOK n00

  • Mesa, Arizona, United States
  • Jul 19th
TIPU 4-Inch Marking Center Finder, Marking Centerline Tool for Woodworking (Medi

TIPU 4-Inch Marking Center Finder, Marking Centerline Tool for Woodworking (Medi

  • USA, United States
  • Jul 19th
STARRETT COMBINATION SQUARE SET, CENTER HEAD, REVERSIBLE PROTRACTOR HEAD 490

STARRETT COMBINATION SQUARE SET, CENTER HEAD, REVERSIBLE PROTRACTOR HEAD 490

  • Lockport, New York, United States
  • Jul 18th

People who viewed this item also vieved

VINTAGE BROWN AND SHARPE OUTSIDE CALIPER #801 0-5 OUTSIDE DIAMETER

VINTAGE BROWN AND SHARPE OUTSIDE CALIPER #801 0-5 OUTSIDE DIAMETER

  • Muskego, Wisconsin, United States
  • Jan 30th
Vintage GFC 6" Dial Caliper TYPE 6921MADE IN SWITZERLAND 0.1-0.05 CASE& MANUAL

Vintage GFC 6" Dial Caliper TYPE 6921MADE IN SWITZERLAND 0.1-0.05 CASE& MANUAL

  • Ann Arbor, Michigan, United States
  • Jan 30th
MITUTOYO Coordinate Measuring Macine MXF 203 Guide Rail

MITUTOYO Coordinate Measuring Macine MXF 203 Guide Rail

  • Lockport, Illinois, United States
  • Jan 30th
Renishaw TP20 CMM Probe Kit Including TP20 Body EM1 & EM2 Modules with Warranty

Renishaw TP20 CMM Probe Kit Including TP20 Body EM1 & EM2 Modules with Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
Mitutoyo 619023 , 160mm Triangular Straight Edge, Rectangular Gage Block

Mitutoyo 619023 , 160mm Triangular Straight Edge, Rectangular Gage Block

  • Jamaica, New York, United States
  • Jan 30th
Ford 35pc Vintage COMPLETE C.E. Johansson Gauge Blocks Set 0.1001"-4"

Ford 35pc Vintage COMPLETE C.E. Johansson Gauge Blocks Set 0.1001"-4"

  • Mansfield, Ohio, United States
  • Jan 30th
Starrett Dial Indicator No. 655-141 .001"- .250" Range

Starrett Dial Indicator No. 655-141 .001"- .250" Range

  • Bowling Green, Ohio, United States
  • Jan 30th
BROWN&SHARPE 7030-5 .0005" BESTEST DIAL INDICATOR

BROWN&SHARPE 7030-5 .0005" BESTEST DIAL INDICATOR

  • Wadesville, Indiana, United States
  • Jan 30th
Starrett Precision Radius Gage Set w/ Case #.S167A

Starrett Precision Radius Gage Set w/ Case #.S167A

  • White Cloud, Michigan, United States
  • Jan 30th
Tool Makers 18" Vernier Height Gage

Tool Makers 18" Vernier Height Gage

  • White Cloud, Michigan, United States
  • Jan 30th
GEM INSTUMENT CLAMP WITH MAGNETIC BASE

GEM INSTUMENT CLAMP WITH MAGNETIC BASE

  • Athens, Georgia, United States
  • Jan 30th
PHASE II MAGNETIC BASE 900-301 W/ DIAL INDICATOR 900-102 0" - 1"

PHASE II MAGNETIC BASE 900-301 W/ DIAL INDICATOR 900-102 0" - 1"

  • Rock Tavern, New York, United States
  • Jan 30th
VINTAGE LUFKIN NO. 1945 4"-5" MICROMETER MACHINIST TOOL

VINTAGE LUFKIN NO. 1945 4"-5" MICROMETER MACHINIST TOOL

  • Waterford, Michigan, United States
  • Jan 30th
STARRETT NO. 575 THREAD MICROMETER 0-1" MACHINIST TOOL

STARRETT NO. 575 THREAD MICROMETER 0-1" MACHINIST TOOL

  • Waterford, Michigan, United States
  • Jan 30th
Starrett #236 Depth and Angle Gauge with original box

Starrett #236 Depth and Angle Gauge with original box

  • Manistee, Michigan, United States
  • Jan 30th
Renishaw TS-27 R Tool Measure Probe

Renishaw TS-27 R Tool Measure Probe

  • North Bend, Oregon, United States
  • Jan 30th
NEW Pittsburgh Digital Angle Gauge 4 x 90 Degree Measuring Range

NEW Pittsburgh Digital Angle Gauge 4 x 90 Degree Measuring Range

  • San Diego, California, United States
  • Jan 30th
2 Comparator Lamps (bulbs) Royal 15V-10A, Shinko 10V-7A-70W

2 Comparator Lamps (bulbs) Royal 15V-10A, Shinko 10V-7A-70W

  • Saint Henry, Ohio, United States
  • Jan 30th
SHINWA 30cm Bamboo Ruler Japanese Traditional Metric Rule Wooden 71757 Japan

SHINWA 30cm Bamboo Ruler Japanese Traditional Metric Rule Wooden 71757 Japan

  • Kanagawa, Japan
  • Jan 30th
Starrett 173MA Thickness Gage Se W/ Straight Leavest, 0.03-0.50mm, 13 Leaves

Starrett 173MA Thickness Gage Se W/ Straight Leavest, 0.03-0.50mm, 13 Leaves

  • Richmond Hill, New York, United States
  • Jan 30th
ROCK OF AGES SURFACE PLATE 18" x 24" x 4.5" MODEL# 599-94-5

ROCK OF AGES SURFACE PLATE 18" x 24" x 4.5" MODEL# 599-94-5

  • Johnson City, Tennessee, United States
  • Jan 30th
Granite Surface Plate 36 x 36 x 6 Inch with 2 Ledges: I (Inv.17047)

Granite Surface Plate 36 x 36 x 6 Inch with 2 Ledges: I (Inv.17047)

  • Portland, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies