+ Post new Ad
40 Chromium Drill Chuck Adapter Hand tool Silver R8 To MT3 End Mill Industrial, C $30.68 – Picture 0
40 Chromium Drill Chuck Adapter Hand tool Silver R8 To MT3 End Mill Industrial, C $30.68 – Picture 0

40 Chromium Drill Chuck Adapter Hand Tool Silver R8 To Mt3 End Mill Industrial

C $30.68

  • suzhou, China
  • Jul 15th
Open on mobile:
QR code
Product Description 40 Chromium Drill Chuck Adapter Hand tool Silver R8 To MT3 End Mill Industrial Details:   Name: Drill Chuck Model: 509876 Material: 40 Chromium Color: Silver (As Picture Show) Length: 153mm Shank: 24mm Processing: Heat Treatment   Package Contents:   1 * Drill Chuck   Notes:   1,The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2,Please allow slight manual measurement deviation for the data. Payment We accept payment via Paypal only. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. Delivery details We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.   Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.    It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.   Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded
Material 40 Chromium
MPN Does Not Apply
Color Silver (As Picture Show)
Package Contents 1 * Drill Chuck
Length 153mm
Model 509876
Shank 24mm
Country/Region of Manufacture China
Processing Heat Treatment
UPC Does not apply

Directions

Similar products from Boring Chucks

(2.5cm /80cm - 1.3cm Capacity, JT33 Taper Mount) - HHIP 1/80cm JT33 Drill

(2.5cm /80cm - 1.3cm Capacity, JT33 Taper Mount) - HHIP 1/80cm JT33 Drill

  • Brooklyn, NY, United States
  • Jul 17th
1-5Pcs 6.5/10/13/16/20mm Drill Chuck Extension Tools Set Manual Automatic Lock

1-5Pcs 6.5/10/13/16/20mm Drill Chuck Extension Tools Set Manual Automatic Lock

  • Shenzhen, China
  • Jul 17th
Jacobs 14N Super Ball Bearing Chuck NEW

Jacobs 14N Super Ball Bearing Chuck NEW

  • Garden Grove, California, United States
  • Jul 16th
Accupro Integral Shank Drill Chuck R8 2JT 1/32* 3/8* Tool 63673008

Accupro Integral Shank Drill Chuck R8 2JT 1/32* 3/8* Tool 63673008

  • Los Angeles, California, United States
  • Jul 16th
Vintage & Antique Lot 9 Drill Chucks Keys Various Sizes Jacobs 32 MA Japan B-1

Vintage & Antique Lot 9 Drill Chucks Keys Various Sizes Jacobs 32 MA Japan B-1

  • Watchung, New Jersey, United States
  • Jul 16th
Jacobs 500 Series 1.5 (1/2 in) -13mm Drill Chuck (S#35-5)

Jacobs 500 Series 1.5 (1/2 in) -13mm Drill Chuck (S#35-5)

  • Independence, Missouri, United States
  • Jul 16th
Lot Of 8 Laith Drill Chuck Keys

Lot Of 8 Laith Drill Chuck Keys

  • Utica, Michigan, United States
  • Jul 16th
10mm Drill Chuck Key Wrench For Electric Drill Clamping Tool Round Shank

10mm Drill Chuck Key Wrench For Electric Drill Clamping Tool Round Shank

  • Shenzhen, China
  • Jul 16th
1/2inch 1.5-13mm Hex Shank Keyless Drill Chuck Screwdriver Adapter Impact Z4P9

1/2inch 1.5-13mm Hex Shank Keyless Drill Chuck Screwdriver Adapter Impact Z4P9

  • shanghai, China
  • Jul 15th
Drill chuck 503803 Brass+Aluminum Alloy Wrench Replacement Tool Useful

Drill chuck 503803 Brass+Aluminum Alloy Wrench Replacement Tool Useful

  • suzhou, China
  • Jul 15th
Vintage Jacobs Drill Chuck No. 33 1/2" 5/64-1/2 with Key 33 No.33

Vintage Jacobs Drill Chuck No. 33 1/2" 5/64-1/2 with Key 33 No.33

  • Long Branch, New Jersey, United States
  • Jul 15th
Brand NEW Bosch HA3JAW, 1/2-inch 3-Jaw Keyless Chuck with SDS-plus Shank

Brand NEW Bosch HA3JAW, 1/2-inch 3-Jaw Keyless Chuck with SDS-plus Shank

  • Energy, Illinois, United States
  • Jul 15th
Jacobs Super Chuck No. 18N 4 JT 1/8 - 3/4 in Capacity Vintage

Jacobs Super Chuck No. 18N 4 JT 1/8 - 3/4 in Capacity Vintage

  • Perris, California, United States
  • Jul 14th
JACOBS CHUCK 36 3 TAPER 18-80 IN. ARBOR 3MT 3JT

JACOBS CHUCK 36 3 TAPER 18-80 IN. ARBOR 3MT 3JT

  • Perris, California, United States
  • Jul 14th
Keyed Drill Chuck Mount B16 Rhm 72800 1.5-13mm Clamping Capacity 42.8 Diamet

Keyed Drill Chuck Mount B16 Rhm 72800 1.5-13mm Clamping Capacity 42.8 Diamet

  • New York, New York, United States
  • Jul 14th
Drill Chuck Keys and holders

Drill Chuck Keys and holders

  • Willmar, Minnesota, United States
  • Jul 14th
Milwaukee Drill Chuck F19KD, 3 Jacobs w/ R8 Shank + (6) R8 Collets Bridgeport

Milwaukee Drill Chuck F19KD, 3 Jacobs w/ R8 Shank + (6) R8 Collets Bridgeport

  • Fort Thomas, Kentucky, United States
  • Jul 14th
(B12) Mixed Lot of 6 Chuck Keys and 1 Supreme Drill Chuck - Jacobs B&D TKK

(B12) Mixed Lot of 6 Chuck Keys and 1 Supreme Drill Chuck - Jacobs B&D TKK

  • Seattle, Washington, United States
  • Jul 14th
Jacobs 3655 K4 Thumb Handle Chuck Key with 3/8-Inch Pilot-Size for Jacobs Ser...

Jacobs 3655 K4 Thumb Handle Chuck Key with 3/8-Inch Pilot-Size for Jacobs Ser...

  • San Antonio, Texas, United States
  • Jul 14th
Jacobs 32288C 41BA-3/8 Chuck 0.04-Inch~0.375- Inch Capacity Medium Duty Plain Be

Jacobs 32288C 41BA-3/8 Chuck 0.04-Inch~0.375- Inch Capacity Medium Duty Plain Be

  • New York, New York, United States
  • Jul 14th

People who viewed this item also vieved

COLLIS 75111 SPLIT SLEEVE DRILL DRIVER - DRILL SIZE: 1" MORSE TAPER SHANK

COLLIS 75111 SPLIT SLEEVE DRILL DRIVER - DRILL SIZE: 1" MORSE TAPER SHANK

  • Nampa, Idaho, United States
  • Jan 30th
12MM x 1.0 arbor MT2 shank (new) for mini lathe chuck or drill machine

12MM x 1.0 arbor MT2 shank (new) for mini lathe chuck or drill machine

  • Whittier, California, United States
  • Jan 30th
BAP300R 20-160mm-C20-2T carbide cutting tool holder fit for insert APMT1135 R0.8

BAP300R 20-160mm-C20-2T carbide cutting tool holder fit for insert APMT1135 R0.8

  • Shenzhen, Guangdong, China
  • Jan 30th
S20R-MWLNR08 CIRCLE INDEXABLE BORING BAR SHANK RIGHT HAND 95 Degree CNC Lathe

S20R-MWLNR08 CIRCLE INDEXABLE BORING BAR SHANK RIGHT HAND 95 Degree CNC Lathe

  • Hong Kong, Hong Kong
  • Jan 30th
BT-40 Inserted Face Mill Holder with 2" OD w/ pull stud

BT-40 Inserted Face Mill Holder with 2" OD w/ pull stud

  • Blue Springs, Missouri, United States
  • Jan 30th
BT-40 End Mill Holder 1 1/4" ID with 2" Hog Mill & Pull Stud

BT-40 End Mill Holder 1 1/4" ID with 2" Hog Mill & Pull Stud

  • Blue Springs, Missouri, United States
  • Jan 30th
NEW DODGE RELIANCE 2517 TAPER-LOCK STEEL 3/4 IN BUSHING B314280

NEW DODGE RELIANCE 2517 TAPER-LOCK STEEL 3/4 IN BUSHING B314280

  • Buffalo, New York, United States
  • Jan 30th
NEW BUNTING BEARINGS F1277 BRONZE MECHANICAL 1-3/4X1-1/2X2-1/2IN BUSHING D268765

NEW BUNTING BEARINGS F1277 BRONZE MECHANICAL 1-3/4X1-1/2X2-1/2IN BUSHING D268765

  • Delta, Ohio, United States
  • Jan 30th
MADE IN USA CAT50 1" DIA END MILL HOLDER GOOD CONDITION CAT 50 LOT C3009

MADE IN USA CAT50 1" DIA END MILL HOLDER GOOD CONDITION CAT 50 LOT C3009

  • Dayton, Ohio, United States
  • Jan 30th
LONG SANDVIK BALAS CAT50 C8 COLLET CHUCK 50MM-VF8-C8 FLEXI-GRIP CAT 50 LOT C1882

LONG SANDVIK BALAS CAT50 C8 COLLET CHUCK 50MM-VF8-C8 FLEXI-GRIP CAT 50 LOT C1882

  • Dayton, Ohio, United States
  • Jan 30th
1 NEW 1-1/4" RTW LATHE TOOL HOLDER WITH 7 FIRTH STERLING CARBIDE INSERTS {226}

1 NEW 1-1/4" RTW LATHE TOOL HOLDER WITH 7 FIRTH STERLING CARBIDE INSERTS {226}

  • Cleveland, Ohio, United States
  • Jan 30th
1 RTW 3/4" LATHE THREAD BORING BAR W 5 TNMC 43 NV NORDIC THREAD INSERTS {139}

1 RTW 3/4" LATHE THREAD BORING BAR W 5 TNMC 43 NV NORDIC THREAD INSERTS {139}

  • Cleveland, Ohio, United States
  • Jan 30th
5/8 X 5-1/2 Inch Lathe Mandrel

5/8 X 5-1/2 Inch Lathe Mandrel

  • Chino, California, United States
  • Jan 30th
21/32-3/4 INCH 7 IN ARBOR- 2-3/4 IN SLEEVE EXPANDING MANDREL (2 PIECE / KIT)

21/32-3/4 INCH 7 IN ARBOR- 2-3/4 IN SLEEVE EXPANDING MANDREL (2 PIECE / KIT)

  • Chino, California, United States
  • Jan 30th
400KG Permanent Magnetic Lifter Heavy Duty 881lb Fast Shipping

400KG Permanent Magnetic Lifter Heavy Duty 881lb Fast Shipping

  • guang zhou, China
  • Jan 30th
Komet Insert Drill V1273090 - Coolant Through & Extension

Komet Insert Drill V1273090 - Coolant Through & Extension

  • Grand Rapids, Michigan, United States
  • Jan 30th
Valenite TAP-31 MS-08 # 8 quick Change tap holder

Valenite TAP-31 MS-08 # 8 quick Change tap holder

  • Coventry, Rhode Island, United States
  • Jan 30th
Bltz Quick change tap Holder WE2-- 9/16"

Bltz Quick change tap Holder WE2-- 9/16"

  • Coventry, Rhode Island, United States
  • Jan 30th
SEAGULL / PRECISION MX213-38-1024US AIR SPINDLE / OPTICAL

SEAGULL / PRECISION MX213-38-1024US AIR SPINDLE / OPTICAL

  • San Jose, California, United States
  • Jan 30th
Tapmatic 70X Reversible Tapping Attachment

Tapmatic 70X Reversible Tapping Attachment

  • Johnson City, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies