405nm 150mW UV Ultraviolet laser diode in Aixiz module w/ leads US Seller SALE!, US $14.00 – Picture 0

405nm 150mW UV Ultraviolet laser diode in Aixiz module w/ leads US Seller SALE!, US $14.00 – Picture 1

405nm 150mW UV Ultraviolet laser diode in Aixiz module w/ leads US Seller SALE!, US $14.00 – Picture 2

405nm 150mW UV Ultraviolet laser diode in Aixiz module w/ leads US Seller SALE!, US $14.00 – Picture 3

405nm 150mW UV Ultraviolet laser diode in Aixiz module w/ leads US Seller SALE!, US $14.00 – Picture 4

405nm 150mw Uv Ultraviolet Laser Diode In Aixiz Module W/ Leads Us Seller Sale!

US $14.00

Midlothian, Virginia, United States
Jan 30th

Open on mobile:
QR code

The diode that is used in this laser module is brand new, and was not extracted from a Blu-ray burner sled, as is visible by its long, uncut pins. They are rated by the manufacturer for 170mW pulse, however they can be driven to provide approximately 150mW continuously (an additional heatsink may be required for prolonged operation of over 35 seconds at this power level). The SLD3234VF diode used in this module is more powerful than the PHR-803T and PHR-805T diode that is frequently extracted from Blu-ray RW drives by laser hobbyists. This diode can be run up to a maximum current of 150 milliamps at the risk of diode life being shortened( One extraordinarily resilient diode lased past 180 milliamps in a destruction test, but this current level is absolutely not recommended). As an example of the ability of this diode, the images above show the laser module (w/ proper power supply) lasing at 120 milliamps with more than enough power to impress. This diode is a standard 5.6mm TO-18 package that has been pressed to the point of recession in an Aixiz module. The only required components for proper operation will be a laser driver and a battery. Also, this module features a threaded lens to allow for focal point adjustment. Through the manual adjustment of the lens, a few different effects can be attained. The first effect is "flash light", with the lens completely screwed in, next is beam with the lens at small distance from the diode, and finally burning with the focal spot being the highest concentration of laser power. Recommended parameters(and warnings) for use..... Use ElectroStaticDischarge(ESD) protection at all times when handling these and any other laser modules. Don't power up module unless a proper driving circuit or otherwise stable power source is used. Don't point at people, ANY vehicles, animals, satellites(spy or not), any buildings, or yourself. THIS LASER WILL BLIND YOU PERMANENTLY IF YOU LOOK INTO THE BEAM....SO DON'T! Also, please use laser safety goggles, a glancing reflection will do damage to the eye. Maximum voltage: 6.2 volts Absolute maximum current(diode death): 170-180 milliamps Threshold current: ~45 milliamps Optimum current/voltage(for decent diode lifetime): 6.0 volts @ 130 milliamps The sale is for one SLD3234VF laser diode pressed in an Aixiz module with leads soldered. It only requires a laser driver and battery for operation. I also have pre-assembled laser kits for sale using these and other diodes for those without access to a soldering iron. These modules will be shipped in ESD packaging, and will be TESTED IMMEDIATELY BEFORE SHIPMENT @ 100ma to ensure lasing. Please use these lasers safely and legally because the BUYER ASSUMES ALL RESPONSIBILITY UPON PURCHASE. Thanks for buying, and remember that the advancement of hobby laser technology relies on laser remaining legal, so please use carefully.