+ Post new Ad
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 0
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 1
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 2
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 3
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 0
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 1
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 2
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens., US $8,900.00 – Picture 3

42 Ton Hydraulic Press. Grimco. Air Over Oil Hydraulics. Heated Platens.

US $8,900.00

  • Bailey, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
Very Nice and Very Clean.  Has been tested and will be re-tested prior to shipping if you buy one (quantity available).  Was originally a 50 ton hand pump press.  It is now equipped with an SPX air over oil pump rated to 3200 PSI.  There is a 3000 PSI gauge on the press.  At 3000 PSI the press would generate 42 tons.  To get full tonnage requires approx 100 PSI of air pressure.  Clamp cylinder is 6" bore with approx 6" max stroke.  The daylight between the platens is approx 10".  The electrically heated platens are 13" x 13" and rated to 600F (2400 watts each).  The press speeds are approx 3 IPM closing and 1 IPM opening.  There is a pendant control with close/open buttons.  Two Watlow temperature controllers.  From the bottom of the press to the bottom platen is approx 24".  The overall dimensions are approx 26" x 26" x 58" tall.  Approx 1500 pounds.  Heater circuit runs on 220 volt; single phase.  If the heated platens aren't required--the press only needs air to operate.  

Directions

Similar products from Other Manufacturing Equipment & Tools

PEDDINGHAUS 66/110H IRON WORKER 66 TON

PEDDINGHAUS 66/110H IRON WORKER 66 TON

  • Euclid, Ohio, United States
  • Jan 30th
LINDE CM250-800 SHAPE CUTTING / PLASMA CUTTING TABLE 15'' X 78'' TABLE

LINDE CM250-800 SHAPE CUTTING / PLASMA CUTTING TABLE 15'' X 78'' TABLE

  • Euclid, Ohio, United States
  • Jan 30th
RANSOHOFF CONVEYORIZED PARTS WASHER 29" X 148"

RANSOHOFF CONVEYORIZED PARTS WASHER 29" X 148"

  • Euclid, Ohio, United States
  • Jan 30th
BLISS 56 OBI PRESS 45 TON

BLISS 56 OBI PRESS 45 TON

  • Euclid, Ohio, United States
  • Jan 30th
CINCINNATI 1410 SHEAR 3/16'' X 127''

CINCINNATI 1410 SHEAR 3/16'' X 127''

  • Euclid, Ohio, United States
  • Jan 30th
FADAL ENGINEERING 906-1/4020HT CNC VMC 43'' X 20''

FADAL ENGINEERING 906-1/4020HT CNC VMC 43'' X 20''

  • Euclid, Ohio, United States
  • Jan 30th
FINN RS1000/4B POWER SHEAR/PUNCH

FINN RS1000/4B POWER SHEAR/PUNCH

  • Euclid, Ohio, United States
  • Jan 30th
AGIE Classic 2S CNC Wire EDM 2005

AGIE Classic 2S CNC Wire EDM 2005

  • Belleville, New Jersey, United States
  • Jan 30th
AGIE Classic 2S CNC Wire EDM 2006

AGIE Classic 2S CNC Wire EDM 2006

  • Belleville, New Jersey, United States
  • Jan 30th
AIR COMPRESSOR

AIR COMPRESSOR

  • Cambridge, Vermont, United States
  • Jan 30th
Walter Valenite Spade Drill Xtra-tec indexable insert B4213.UF51.508.Z1.152R-8

Walter Valenite Spade Drill Xtra-tec indexable insert B4213.UF51.508.Z1.152R-8

  • Punta Gorda, Florida, United States
  • Jan 30th
Antique Vintage Unique Rare Industrial Machine Cast Iron Steampunk Salvage

Antique Vintage Unique Rare Industrial Machine Cast Iron Steampunk Salvage

  • Lakewood, Ohio, United States
  • Jan 30th
REGAL 1-3/8"-18 NEF H2 HSG 6FL BOTTOM TAP 0529N71M MACHINIST TOOLS

REGAL 1-3/8"-18 NEF H2 HSG 6FL BOTTOM TAP 0529N71M MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
lathe Armstong No 2 LH tool holder 9/16" x 1-3/8" shank

lathe Armstong No 2 LH tool holder 9/16" x 1-3/8" shank

  • Punta Gorda, Florida, United States
  • Jan 30th
1-64 TAP H1 2FL BOTTOM EDP#10010 BRUBAKER TOOL TAPS QTY-2 MACHINIST TOOLS

1-64 TAP H1 2FL BOTTOM EDP#10010 BRUBAKER TOOL TAPS QTY-2 MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A)

Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A)

  • Lincoln, Nebraska, United States
  • Jan 30th
CDI TORQUE PRODUCTS 1502 TP-1 20-170 IN. LB USED MACHINIST HAND TOOLS

CDI TORQUE PRODUCTS 1502 TP-1 20-170 IN. LB USED MACHINIST HAND TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
HERTEL 3/4"-16 NF HSS-E G H7 BOTTOM FORMING TAP TIN H1810 USA

HERTEL 3/4"-16 NF HSS-E G H7 BOTTOM FORMING TAP TIN H1810 USA

  • Punta Gorda, Florida, United States
  • Jan 30th
6-40 TAPS H2 3FL BRITE UNION HSS TAPER TAP USA QTY-3 MACHINIST TOOLS

6-40 TAPS H2 3FL BRITE UNION HSS TAPER TAP USA QTY-3 MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
5/16"-18 BOTTOMING TAP H3 2FL KENNAMETAL KHSST28318 MACHINIST TOOLS

5/16"-18 BOTTOMING TAP H3 2FL KENNAMETAL KHSST28318 MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th

People who viewed this item also vieved

SANDVIK TPMT 090204-KF TPMT 1.8 (1.5) 1-KF 3215

SANDVIK TPMT 090204-KF TPMT 1.8 (1.5) 1-KF 3215

  • cz, Czech Republic
  • Jun 1st
SANDVIK 880 06 04 06H C LM H13A

SANDVIK 880 06 04 06H C LM H13A

  • cz, Czech Republic
  • Jun 1st
1 1/16 HEX BAR 4.5" LONG 1018 STEEL 1.062 HEX ROD

1 1/16 HEX BAR 4.5" LONG 1018 STEEL 1.062 HEX ROD

  • Indianapolis, Indiana, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies