+ Post new Ad
(#4567C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver, US $140 – Picture 0
(#4567C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver, US $140 – Picture 1
(#4567C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver, US $140 – Picture 2
(#4567C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver, US $140 – Picture 0
(#4567C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver, US $140 – Picture 1
(#4567C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver, US $140 – Picture 2

(#4567c) Used Machinist 3/8” Ht Usa Made Split Sleeve Tap Driver

US $140

  • Warren, Michigan, United States
  • Feb 15th
Open on mobile:
QR code
No 4567   Retired Machinist/Toolmaker with 40+ years in the trade.  Liquidating MY VAST collection of tools, along with some tools purchased from recently closed Tool & Die shops.   (#4567C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver   You are bidding on a used, American made, manufactured by Collis Manufacturing Co, in the USA, 3/8 inch hand tap split sleeve tap driver. Square on the end of the tap shank engages with the broached square hole in the tap driver for a positive drive of the tap. Made from quality steel and properly heat treated! Its features are:   * Hardened steel * For 3/8 inch hand taps * No.2 MT shank * 3-1/8 inches in OVL * Model No. 72423   I will combine shipping when winning more than 1 item please request invoice for combined shipping. This item will shipped by First Class Mail. I try to ship within 24 hours of payment excluding weekends, any payments after 7:00 PM EST on Fridays will be shipped Monday morning!       Buyer responsible for shipping Approx. shipping Wt 7 OZS. Good-Luck Bidding            
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Collis Manufacturing Co
Model * Model No. 72423
Brand Collis Manufacturing Co

Directions

Similar products from Adapters & Arbor Tool Holders

MT1 x 3/8 x 24 THREADED ARBOR MORSE TAPER #1 DRILL CHUCK LATHE MACHINIST TOOL

MT1 x 3/8 x 24 THREADED ARBOR MORSE TAPER #1 DRILL CHUCK LATHE MACHINIST TOOL

  • Danville, New Hampshire, United States
  • Feb 16th
4 1/2" Shell Mill

4 1/2" Shell Mill

  • Denver, Pennsylvania, United States
  • Feb 16th
(#4563C) Used Machinist 3/4” Pipe USA Made Split Sleeve Tap Driver

(#4563C) Used Machinist 3/4” Pipe USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4589C) Used No.1 to No.5 Morse Taper Drill Sleeve or Adaptor

(#4589C) Used No.1 to No.5 Morse Taper Drill Sleeve or Adaptor

  • Warren, Michigan, United States
  • Feb 15th
(#4578C) Used Machinist 1-1/4” HT USA Made Split Sleeve Tap Driver

(#4578C) Used Machinist 1-1/4” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4591C) Used No.1 to No.4 Morse Taper Drill Sleeve or Adaptor

(#4591C) Used No.1 to No.4 Morse Taper Drill Sleeve or Adaptor

  • Warren, Michigan, United States
  • Feb 15th
(#4573C) Used Machinist 3/4” HT USA Made Split Sleeve Tap Driver

(#4573C) Used Machinist 3/4” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4569C) Used Machinist 5/8” HT USA Made Split Sleeve Tap Driver

(#4569C) Used Machinist 5/8” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4600C) Used No.1 to No.3 Morse Taper Drill Sleeve or Adaptor

(#4600C) Used No.1 to No.3 Morse Taper Drill Sleeve or Adaptor

  • Warren, Michigan, United States
  • Feb 15th
(#4560C) Used Machinist 3/8” Pipe USA Made Split Sleeve Tap Driver

(#4560C) Used Machinist 3/8” Pipe USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4568C) Used Machinist 9/16” HT USA Made Split Sleeve Tap Driver

(#4568C) Used Machinist 9/16” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4580C) New 1-1/4 inch Straight to No.2 Morse Taper Solid Socket

(#4580C) New 1-1/4 inch Straight to No.2 Morse Taper Solid Socket

  • Warren, Michigan, United States
  • Feb 15th
(#4566C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver

(#4566C) Used Machinist 3/8” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4565C) Used Machinist 1/4” HT USA Made Split Sleeve Tap Driver

(#4565C) Used Machinist 1/4” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4562C) Used Machinist 1/2” Pipe USA Made Split Sleeve Tap Driver

(#4562C) Used Machinist 1/2” Pipe USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4575C) Used Machinist 3/4” HT USA Made Split Sleeve Tap Driver

(#4575C) Used Machinist 3/4” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4572C) Used Machinist 3/4” HT USA Made Split Sleeve Tap Driver

(#4572C) Used Machinist 3/4” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4558C) Used Machinist 1/4” Pipe USA Made Split Sleeve Tap Driver

(#4558C) Used Machinist 1/4” Pipe USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4570C) Used Machinist 5/8” HT USA Made Split Sleeve Tap Driver

(#4570C) Used Machinist 5/8” HT USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th
(#4564C) Used Machinist 1” Pipe USA Made Split Sleeve Tap Driver

(#4564C) Used Machinist 1” Pipe USA Made Split Sleeve Tap Driver

  • Warren, Michigan, United States
  • Feb 15th

People who viewed this item also vieved

Valenite V50CT-10SG-55 CAT 50 Collet Chuck

Valenite V50CT-10SG-55 CAT 50 Collet Chuck

  • Lockport, New York, United States
  • Jan 30th
Carbaloy CV50-EM3.75-0750 End Mill Holder

Carbaloy CV50-EM3.75-0750 End Mill Holder

  • Lockport, New York, United States
  • Jan 30th
UNIMERCO BORING INDEXABLE TOOLHOLDER P221 CONCEPT 1 / 10.5"

UNIMERCO BORING INDEXABLE TOOLHOLDER P221 CONCEPT 1 / 10.5"

  • New Britain, Connecticut, United States
  • Feb 13th
5 boring bars

5 boring bars

  • Bronson, Florida, United States
  • Feb 13th
Armstrong tool holder 1-R

Armstrong tool holder 1-R

  • Wood River, Illinois, United States
  • Feb 18th
Armstrong tool holder 1-S

Armstrong tool holder 1-S

  • Wood River, Illinois, United States
  • Feb 18th
Starrett Dial Indicator. Model25-144. Tolerance .001" Range .100"

Starrett Dial Indicator. Model25-144. Tolerance .001" Range .100"

  • Cherry Hill, New Jersey, United States
  • Feb 22nd
SANDVIK COROMANT PSKNR 2525 M15 Lathe Turning Tool Holder + 1 SNMG 1506 insert

SANDVIK COROMANT PSKNR 2525 M15 Lathe Turning Tool Holder + 1 SNMG 1506 insert

  • Ukraine, Ukraine
  • Feb 22nd
Martin Tapered Bushing 1210 1 12101 1" Bore 1/4" Keyway NIB

Martin Tapered Bushing 1210 1 12101 1" Bore 1/4" Keyway NIB

  • Clover, South Carolina, United States
  • Feb 24th
NEW ALL AMERICAN P64-34-3/4 PRESS FIT DRILL BUSHING CARBON STEEL 3/4" ID 1" OD

NEW ALL AMERICAN P64-34-3/4 PRESS FIT DRILL BUSHING CARBON STEEL 3/4" ID 1" OD

  • Apache Junction, Arizona, United States
  • Feb 24th
(1) Used Big BT50-CC1.000-6.000 Collet Chuck Taper Tool Holder

(1) Used Big BT50-CC1.000-6.000 Collet Chuck Taper Tool Holder

  • Albertville, Minnesota, United States
  • Feb 28th
BT30 ER16 collet chuck milling tool holder

BT30 ER16 collet chuck milling tool holder

  • United States
  • Mar 1st
0 to 1/2" Capacity Precision Keyless Drill Chuck

0 to 1/2" Capacity Precision Keyless Drill Chuck

  • Bloomfield, New York, United States
  • Mar 10th
Jacobs K3 Thumb chuck key - Set of 2 -

Jacobs K3 Thumb chuck key - Set of 2 -

  • Clatskanie, Oregon, United States
  • Mar 10th
KWIK SWITCH 300 3/4" DIA ENDMILL HOLDER MORE TOOLING LISTED END MILL LOT C12493

KWIK SWITCH 300 3/4" DIA ENDMILL HOLDER MORE TOOLING LISTED END MILL LOT C12493

  • Dayton, Ohio, United States
  • Apr 22nd
KWIK SWITCH 300 1" DIA ENDMILL HOLDER MORE TOOLING LISTED END MILL LOT C12496

KWIK SWITCH 300 1" DIA ENDMILL HOLDER MORE TOOLING LISTED END MILL LOT C12496

  • Dayton, Ohio, United States
  • Apr 22nd
Kwik Switch 200 spindle for bridgeport mill

Kwik Switch 200 spindle for bridgeport mill

  • Rolla, Missouri, United States
  • May 26th
Ettco Multi Drill & Tapping Head 056906 4 Spindle

Ettco Multi Drill & Tapping Head 056906 4 Spindle

  • Machesney Park, Illinois, United States
  • May 26th
Sunnen Mandrel 1PL-1062 Honing Unit

Sunnen Mandrel 1PL-1062 Honing Unit

  • Dayton, Ohio, United States
  • May 27th
Sunnen Hone SL 1020 Mandrel with Stone, Truing Sleeve, Wedge, Clip

Sunnen Hone SL 1020 Mandrel with Stone, Truing Sleeve, Wedge, Clip

  • Scottsdale, Arizona, United States
  • May 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies