+ Post new Ad
48-20-5010 Milwaukee 1-1/8" Thin Wall Core Bit, US $35.00 – Picture 0
48-20-5010 Milwaukee 1-1/8" Thin Wall Core Bit, US $35.00 – Picture 0

48-20-5010 Milwaukee 1-1/8" Thin Wall Core Bit

US $35.00

  • Downey, California, United States
  • Jan 30th
Open on mobile:
QR code
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thin Wall construction is ideal for smaller hammers and newer concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus drive Shank must be used to drive the Core Bit. Use of Center Pin and Guide Plate is not recommended for positioning and starting a 1-1/8 inch hole. Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core Bits for cured/seasoned concrete or use with larger hammers.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Milwaukee
MPN 48-20-5010
Model 1-1/8" Thin Wall Core Bit
UPC 045242105052

Directions

Similar products from Core Drills & Rigs

3/4" inch 20mm Diamond sintered segment hole saw core drills 5/8"-11W arbor

3/4" inch 20mm Diamond sintered segment hole saw core drills 5/8"-11W arbor

  • Hong Kong, Hong Kong
  • Jan 30th
28mm 36mm 45mm Diamond Coated Core Drill Bit Hole Saw Glass Tile Ceramic Marble

28mm 36mm 45mm Diamond Coated Core Drill Bit Hole Saw Glass Tile Ceramic Marble

  • shenzhen, China
  • Jan 30th
3 X 11mm 7/16" Inch Diamond Coated Drills Bit Hole Saw Tile Marble Glass Granite

3 X 11mm 7/16" Inch Diamond Coated Drills Bit Hole Saw Tile Marble Glass Granite

  • shenzhen, China
  • Jan 30th
2.5" x 24" Diamond Vantage Core Bit Drill Masonry Concrete wall electrical pipe

2.5" x 24" Diamond Vantage Core Bit Drill Masonry Concrete wall electrical pipe

  • Irvine, California, United States
  • Jan 30th
Weka DK 12 and and M1 Stand (Diamond Products) Core Bore Drill and Stand

Weka DK 12 and and M1 Stand (Diamond Products) Core Bore Drill and Stand

  • Jupiter, Florida, United States
  • Jan 30th
Silverline SDS Plus Core Drill Arbor 200Mm Fits 1/2" BSP TCT Power Drill

Silverline SDS Plus Core Drill Arbor 200Mm Fits 1/2" BSP TCT Power Drill

  • London, United Kingdom
  • Jan 30th
88155 PT Polypropylene Hose Fitting

88155 PT Polypropylene Hose Fitting

  • New Paris, Indiana, United States
  • Jan 30th
3/4 X 1/2 Black STD Hex Bushing

3/4 X 1/2 Black STD Hex Bushing

  • New Paris, Indiana, United States
  • Jan 30th
Combo 1.5", 2.5", 3.5", 4.5" Wet Diamond Core Drill Bit for Concrete - Premium

Combo 1.5", 2.5", 3.5", 4.5" Wet Diamond Core Drill Bit for Concrete - Premium

  • Rowland Heights, California, United States
  • Jan 30th
1-3/8” CONCRETE DIAMOND DRY CORE BIT

1-3/8” CONCRETE DIAMOND DRY CORE BIT

  • Webster City, Iowa, United States
  • Jan 30th
3" Premium Dry Diamond Core Drill Bit for Concrete Masonry 20 pack

3" Premium Dry Diamond Core Drill Bit for Concrete Masonry 20 pack

  • United States
  • Jan 30th
10pcs Diamond Saw Cut Off Discs Wheel Blades Rotary Tool Set 1/8 Shank for Dreme

10pcs Diamond Saw Cut Off Discs Wheel Blades Rotary Tool Set 1/8 Shank for Dreme

  • ???, ???, China
  • Jan 30th
Unitec/Spitznas 2 1320 0010 Core Drill w/ Case AND ACCESSORIES

Unitec/Spitznas 2 1320 0010 Core Drill w/ Case AND ACCESSORIES

  • Milton Freewater, Oregon, United States
  • Jan 30th
4" Core Bit Drill Wet Concrete Masonry 4 in.

4" Core Bit Drill Wet Concrete Masonry 4 in.

  • Bakersfield, California, United States
  • Jan 30th
MILWAUKEE CORE BIT 9" DIAMOND PREMIUM DRILL BIT

MILWAUKEE CORE BIT 9" DIAMOND PREMIUM DRILL BIT

  • Milton Freewater, Oregon, United States
  • Jan 30th
target dr150 core drill and dr450 base nice concrete drill

target dr150 core drill and dr450 base nice concrete drill

  • Missoula, Montana, United States
  • Jan 30th
NEW DDM 3" BP10 DIAMOND CORE BIT BP310

NEW DDM 3" BP10 DIAMOND CORE BIT BP310

  • Milton Freewater, Oregon, United States
  • Jan 30th
Am-Tech 82mm Core Drill with 180mm Extension Bar AMF1212

Am-Tech 82mm Core Drill with 180mm Extension Bar AMF1212

  • Ruislip, London, HA4 6LP, United Kingdom, United Kingdom
  • Jan 30th
CORE DRILL H95 # DD19.5L

CORE DRILL H95 # DD19.5L

  • Riverton, Utah, United States
  • Jan 30th
4 GALLON WATER TANK FOR CORE DRILLS AND RIGS includes safety glasses 6pk

4 GALLON WATER TANK FOR CORE DRILLS AND RIGS includes safety glasses 6pk

  • United States
  • Jan 30th

People who viewed this item also vieved

HILTI TE 4-A18 SDS HAMMER DRILL 18V 21.6V B18 5.2

HILTI TE 4-A18 SDS HAMMER DRILL 18V 21.6V B18 5.2

  • Houston, Texas, United States
  • May 28th
HILTI TE 40 AVR Great condition Free drill bits

HILTI TE 40 AVR Great condition Free drill bits

  • San Jose, California, United States
  • May 28th
Hilti TE 4- A18 SDS hammer drill w/ two batteries, case and charger

Hilti TE 4- A18 SDS hammer drill w/ two batteries, case and charger

  • Roanoke, Virginia, United States
  • May 28th
"MAKITA" # 6302H 1/2" Corded Drill unit # 2

"MAKITA" # 6302H 1/2" Corded Drill unit # 2

  • Coventry, Rhode Island, United States
  • May 29th
6 Lenox Speed Slot Hole Saw Bit 4 are 1-1/8" 2 are 7/8"

6 Lenox Speed Slot Hole Saw Bit 4 are 1-1/8" 2 are 7/8"

  • DeKalb, Illinois, United States
  • May 29th
DEWALT 176632-00 HOUSING,CLUTCH FOR DRYWALL SCREWDRIVER

DEWALT 176632-00 HOUSING,CLUTCH FOR DRYWALL SCREWDRIVER

  • Rexburg, Idaho, United States
  • May 29th
#TE-YX 1-13 HILTI HAMMER BIT w/ SDS MAX SHANK 1" X 13" ***NEW***

#TE-YX 1-13 HILTI HAMMER BIT w/ SDS MAX SHANK 1" X 13" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
1 1/4" , 1.25 inch Masonry Carbide Drill Bit 16" long Spline Drive Quality Bit

1 1/4" , 1.25 inch Masonry Carbide Drill Bit 16" long Spline Drive Quality Bit

  • Port Charlotte, Florida, United States
  • Jun 9th
#48-20-3958 MILWAUKEE MAGNUM HAMMER BIT w/ SDS MAX SHANK 1-1/16" X 23" ***NEW***

#48-20-3958 MILWAUKEE MAGNUM HAMMER BIT w/ SDS MAX SHANK 1-1/16" X 23" ***NEW***

  • Tulsa, Oklahoma, United States
  • Jun 9th
New SKIL 74145 Cement Hammer Drill Adapter Bit Threaded Carbide Masonry Tool hex

New SKIL 74145 Cement Hammer Drill Adapter Bit Threaded Carbide Masonry Tool hex

  • Grand Rapids, Michigan, United States
  • Jun 16th
MAKITA 6914D ROTARY HAMMER DRILL

MAKITA 6914D ROTARY HAMMER DRILL

  • Essex, Maryland, United States
  • Jun 16th
DeWalt DW059 1/2" Impact plus 18v hammer drill 4 batteries, charger, case

DeWalt DW059 1/2" Impact plus 18v hammer drill 4 batteries, charger, case

  • Phoenix, Arizona, United States
  • Jun 16th
Hilti SD 4500 and SMD 50 Screw Gun

Hilti SD 4500 and SMD 50 Screw Gun

  • Fort Walton Beach, Florida, United States
  • Oct 21st
Ridgid 1/4 in. AC Corded Electric Collated Screw Screws Gun Screwgun

Ridgid 1/4 in. AC Corded Electric Collated Screw Screws Gun Screwgun

  • Bethlehem, Georgia, United States
  • Oct 21st
HILTI SD 4500 Drywall Screwgun

HILTI SD 4500 Drywall Screwgun

  • Anchorage, Alaska, United States
  • Oct 21st
DAYTON 3/8 " PNEUMATIC DRILL # 2Z488E

DAYTON 3/8 " PNEUMATIC DRILL # 2Z488E

  • California, United States
  • Nov 14th
**BRAND NEW**Milwaukee 48-06-2871 2spd 1/2" Right Angle Drive Corded Drill--NR--

**BRAND NEW**Milwaukee 48-06-2871 2spd 1/2" Right Angle Drive Corded Drill--NR--

  • Forest Hills, New York, United States
  • Nov 14th
Right Angle Drill Attachment Chuck Adapter Electric Power Cordless 3/8 90 Degree

Right Angle Drill Attachment Chuck Adapter Electric Power Cordless 3/8 90 Degree

  • Los Alamitos, California, United States
  • Nov 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies