4axis Cnc 3040 Router 3d Engraver Pcb Metal Milling Engraving Machine 800w+rc

US $3600

Basel, Switzerland
Aug 6th

Open on mobile:
QR code

SKU: TS3040 +TS30402 +TS001 Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. Tupianku Image Hosting Service Description: 1. This 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, w Store category Sign Up Now ! You may also like 4AXIS CNC 3040 Router 3D Engraver PCB Metal Milling Engraving Cutter Machine+RC Product Description shipping notice Can not ship to Puerto Rico,Alaska/Hawaii X,Y,Z Working Area 400(Y)*295X*80(Z)mm Table size 550Y*360Xmm Max. Feeding height 60mm Cooling Water-cooling Speed mode By adjusting the VFD output voltage and operating Repeat accuracy 0.05mm Spindle precision radial beat acuities 0.03mm Communication interface through parallel connection with computer Maximum speed 0-4000mm/min Carving speed 0-2500mm/min(different materials differ Spindle motor 800W Brand Unbranded/Generic MPN Does Not Apply Applicable software(2) if need full version,please buy it at officialweb Control CNC Machine Type 4 Axis Router Machine Modified Item No Modification Description No SKU: TS3040 +TS30402 +TS001 Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. Description: 1. This 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner... 5. With the assist of the ROUTER 3040T, your design idea will be real-time display. ENGRAVING MACHINE parameters: X, Y, Z Working Area: 400(Y)*295X*80(Z)mm Outside dimension: 630*505*495mmL*W*H Table size : 550Y*360Xmm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤60mm Drive unit: X axis---SFU01204-4 Ball Screws Y axis---SFU01204-4 Ball Screws Z axis---SFU01204-4 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm Spindle motor (tips1. The spindle motor must connect with the VFD. 2. It cannot directly connect with the supply voltage (AC220V). 3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC220V, 50Hz, 5A, 0.8KW VFD Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through parallel connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min Control box parameters: Operating Voltage: AC 220V Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive Computer connection: Parallel port Command code: G code Protection: Emergency stop button Feature: 1. The NEW 0.8KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used to process aluminum alloy and hard wood. 2. water cooling spindle works more stable and durable. 3. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. How to use: 1. Assembling and locating the machine on steady desk well. 2. Make sure that your computer has a 25pin parallel port output. 3. Place the contral box in a ventilated dry place where there is no dust, no moisture 4. Connecting the control box with the machine and you computer and make sure the plug will not come off. 5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A).Otherwise, It will damage the driver of the controller. 6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. 7. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. 8. You can enjoy making you dream with using our machine now. Waterproof design, very durable, anti-dirt, oil spray Power by USB port Dimensions: 22 x 8 x 3cm The usb self-check light, you can type the " scroll" on the keyboard to activate it. Directional motion control: X+,X-,Y+,Y-,Z+,Z-,A+,A- Feed rate control: F+,F- Jog rate: J+,J- Spindle speed: speed up, slow down Programming: E-stop,cycle start,spindle on/off,Redo,single step,original point Package Include 1 * Remote controller 1 * Cable Payment Delivery details Return policy Feedback Con-tact us Payment We accept PayPal payment only Payment must be received within 7 days after order is made. Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility. Delivery details Please pay attention to the payment in advance: according to experience, a transfer takes 2-3 days depending on the bank until the money is over. As soon as your payment is received, we will send you the goods within 48 hours. On Saturday and Sunday there is no delivery and no shipping. Please note: We ship parcels from Germany warehouse to europe buyers! 3-7 days: GERMANY 5-10days: Other countries We promise that every item has been sent. But sometimes there is also 0.3% package lost during transport . If this happens after we have confirmed this with the post, we will send you the package again as soon as possible or refund the money immediately. Return policy Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects. a) If you receive a defective item, Please tell us the problem in details and Please con-tact us within 14 days after you receive the package. b) What you returned must be intact and in its original packaging as received . Customer is responsible for shipping costs of the returned item caused by misorder,or don't need it anymore. c) We will cover the cost of shipping if the item is defect when you received. Or We will send you a new unit or refund the full payment you paid. Feedback Thanks for buying my business. If you have any problem with the item, if you have got it, please do not hesitate to contact us. We will provide you the best solution for any problem with the item. We would be delighted if you kindly contacted us before requesting a return or leave negative feedback. Con-tact us Business Hour : Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply you-= within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please con-tact us with ebay message. Please feel free to con-tact us if you have any questions. Feedback On Aug-06-21 at 02:37:05 PDT, seller added the following information:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	shipping notice	Can not ship to Puerto Rico,Alaska/Hawaii
Carving speed	0-2500mm/min(different materials differ
X,Y,Z Working Area	400(Y)295X80(Z)mm
Spindle motor	800W
Table size	550Y*360Xmm
Brand	Unbranded/Generic
Max. Feeding height	60mm
MPN	Does Not Apply
Cooling	Water-cooling
Applicable software(2)	if need full version,please buy it at officialweb
Speed mode	By adjusting the VFD output voltage and operating
Control	CNC
Repeat accuracy	0.05mm
Machine Type	4 Axis Router Machine
Spindle precision	radial beat acuities 0.03mm
Modified Item	No
Communication interface	through parallel connection with computer
Modification Description	No
Maximum speed	0-4000mm/min
UPC	Does not apply