+ Post new Ad
5" and 6" CNC ROTARY TABLE UPGRADE KIT, US $199.95 – Picture 0
5" and 6" CNC ROTARY TABLE UPGRADE KIT, US $199.95 – Picture 0

5" And 6" Cnc Rotary Table Upgrade Kit

US $199.95

  • Las Vegas, Nevada, United States
  • Jun 12th
Open on mobile:
QR code
5" and 6" CNC ROTARY TABLE UPGRADE KIT ADD THIS KIT TO YOUR ROTARY TABLE  # 100242 TO UPGRADE TO CNC The  6" rotary table # 100242 has a special handwheel which is also a 60 XL037 pulley.  Add this bracket, motor and drive belt kit to your table and it will be both full manual and CNC operational.  The motor is pre- configured to plug into the Gecko 540 drive.  If you have a different CNC drive system, the DB 9 connector can be removed and your own connector added.  The motor is a NEMA 23 with 250 OZ/IN torque. PLEASE NOTE: This kit fits our  rotary tables which have the special handwheel as standard.  If you have an older unit from Shoptask or Shopmaster or some other brands of Indian or Chinese tables, you will need kit #100110 CHINA, 110242CKC or 100242CK.  Please refer to the diagram to be sure the bracket will fit your rotary table. Chicago lathe CNC Tools turning machine 199.95 Prestalia e-commerce solutions.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN 100242CKC
Brand Chicago lathe CNC Tools turning machine
UPC 738581616265
EAN 0738581616265

Directions

Similar products from Rotating Tables

Anchor 75mm 4" Round Vice for Rotary Table Vertical Slide Vise + Clamp Kit

Anchor 75mm 4" Round Vice for Rotary Table Vertical Slide Vise + Clamp Kit

  • SHEFFIELD, United Kingdom
  • Jun 17th
NBROS monitor arm fixing clamp (vice) reinforcement plate [top for 0.99 x 180 mm

NBROS monitor arm fixing clamp (vice) reinforcement plate [top for 0.99 x 180 mm

  • Japan, Japan
  • Jun 17th
Fadal 4th Axis Rotary Table Model VH65

Fadal 4th Axis Rotary Table Model VH65

  • Stewartsville, Missouri, United States
  • Jun 16th
024-0186 Brad Nails and 1/4" Crown Staples

024-0186 Brad Nails and 1/4" Crown Staples

  • Metamora, Illinois, United States
  • Jun 15th
12" HORIZONTAL ROTARY TABLE with sub table Used

12" HORIZONTAL ROTARY TABLE with sub table Used

  • Middlesex, New Jersey, United States
  • Jun 15th
SHERLINE 3" ROTARY TABLE WITH CONTROLLER AND CHARGER

SHERLINE 3" ROTARY TABLE WITH CONTROLLER AND CHARGER

  • Santa Cruz, California, United States
  • Jun 14th
Parker 4504 Linear Stage / 2535 Rotary Stage

Parker 4504 Linear Stage / 2535 Rotary Stage

  • Nazareth, Pennsylvania, United States
  • Jun 13th
Camco 902rdm Rotary Indexing Table & Base - Variable Automated 4-Station 406 lbs

Camco 902rdm Rotary Indexing Table & Base - Variable Automated 4-Station 406 lbs

  • Akron, Ohio, United States
  • Jun 13th
SET OF M6 & M8 CLAMPING KIT SUITABLE FOR ROTARY TABLE 3" & 4" / HV4 & HV6

SET OF M6 & M8 CLAMPING KIT SUITABLE FOR ROTARY TABLE 3" & 4" / HV4 & HV6

  • Delhi, India
  • Jun 12th
2"/50MM SELF CENTERING VICE LOW PROFILE MODEL

2"/50MM SELF CENTERING VICE LOW PROFILE MODEL

  • Delhi, India
  • Jun 12th
BISON HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER 8" 3 JAW CHUCK W/TAILSTOCK

BISON HORIZONTAL/VERTICAL SUPER SPACER ROTARY INDEXER 8" 3 JAW CHUCK W/TAILSTOCK

  • Lebanon, New Jersey, United States
  • Jun 10th
Haas TR-210 Trunnion Rotary Table Indexer 4th & 5th Axis

Haas TR-210 Trunnion Rotary Table Indexer 4th & 5th Axis

  • South Windsor, Connecticut, United States
  • Jun 10th
HAAS HRT-210 Rotary Table (8" Diameter) DC Brush Drive Motor & 17-Pin Cable

HAAS HRT-210 Rotary Table (8" Diameter) DC Brush Drive Motor & 17-Pin Cable

  • Chatsworth, California, United States
  • Jun 10th
Tail Stock Attachment For Chuck Rotary Axis for CO2 Laser Engraving ~39mm

Tail Stock Attachment For Chuck Rotary Axis for CO2 Laser Engraving ~39mm

  • Murrieta, California, United States
  • Jun 9th
9” TROYKEY Model 0-9 Horizontal/ Vertical Rotary Table, Milling Machine CNC

9” TROYKEY Model 0-9 Horizontal/ Vertical Rotary Table, Milling Machine CNC

  • Sun City, California, United States
  • Jun 9th
Sherline CNC Rotary Indexer Riser Plate 8710

Sherline CNC Rotary Indexer Riser Plate 8710

  • Santa Ana, California, United States
  • Jun 9th
65mm 2-1/2" 3 Jaw Self Centering Reversible Jaws Lathe Chuck M14x1 MT1 Shank 1MT

65mm 2-1/2" 3 Jaw Self Centering Reversible Jaws Lathe Chuck M14x1 MT1 Shank 1MT

  • DELHI, DELHI, India
  • Jun 8th
65mm 3 Jaw Self Centering 2-1/2" Mini Chuck M14x1 Thread Lathe MT1 Arbor DB M6x1

65mm 3 Jaw Self Centering 2-1/2" Mini Chuck M14x1 Thread Lathe MT1 Arbor DB M6x1

  • DELHI, DELHI, India
  • Jun 8th
HHIP 3900-2358 Flange 7 Chuck Size

HHIP 3900-2358 Flange 7 Chuck Size

  • Miami, FL, United States
  • Jun 8th
48" Square Giddings and Lewis Milling Rotary Table With Electric Servo

48" Square Giddings and Lewis Milling Rotary Table With Electric Servo

  • Houston, Texas, United States
  • Jun 7th

People who viewed this item also vieved

Precision Machinist Set-up Block Step Block 2 x 2 1/4 x 2

Precision Machinist Set-up Block Step Block 2 x 2 1/4 x 2

  • DeKalb, Illinois, United States
  • Jan 30th
USED ISCAR TOOL BLOCK FOR HEAVY-DUTY PARTING GROOVING BLADE SGTBK 38-9

USED ISCAR TOOL BLOCK FOR HEAVY-DUTY PARTING GROOVING BLADE SGTBK 38-9

  • Fairfield, Iowa, United States
  • Jan 30th
Kastalon HV91M36 Stop Guide

Kastalon HV91M36 Stop Guide

  • Peoria, Illinois, United States
  • Jan 30th
Riten Concentric Spring live centers New Live Center MT# 3 USA 17103

Riten Concentric Spring live centers New Live Center MT# 3 USA 17103

  • Carrollton, Ohio, United States
  • Jan 30th
Riten 69412 Large Carbide Point Imperial Full Dead Center, B&S Taper 12 /34C/

Riten 69412 Large Carbide Point Imperial Full Dead Center, B&S Taper 12 /34C/

  • Saint Louis, Missouri, United States
  • Jan 30th
MT5-75 Degree 6" Bull Nose Live Center with 6" Diameter

MT5-75 Degree 6" Bull Nose Live Center with 6" Diameter

  • Chino, California, United States
  • Jan 30th
MACHINIST LATHE TOOL GRIPS RIGHT ANGLE DRILL HEAD WITH JACOBS CHUCK

MACHINIST LATHE TOOL GRIPS RIGHT ANGLE DRILL HEAD WITH JACOBS CHUCK

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
Heavy Duty Chuck Wrench 1/2'' Square

Heavy Duty Chuck Wrench 1/2'' Square

  • Brooksville, Florida, United States
  • Jan 30th
Heavy Duty Chuck Wrench 1/2'' Hex

Heavy Duty Chuck Wrench 1/2'' Hex

  • Brooksville, Florida, United States
  • Jan 30th
9 Steel City 2" Inch Clamps Get A Lot Of 9 Clamps Total

9 Steel City 2" Inch Clamps Get A Lot Of 9 Clamps Total

  • Fort Oglethorpe, Georgia, United States
  • Jan 30th
Irwin 59100CD Quick-Grip Handi-Clamp Curved Bar Clamp-1-1/2" CURVED BAR CLAMP

Irwin 59100CD Quick-Grip Handi-Clamp Curved Bar Clamp-1-1/2" CURVED BAR CLAMP

  • Brooklyn, New York, United States
  • Jan 30th
NEW DESTACO 861 PNEUMATIC ACTION CLAMP,865,102000, 3000 LBS, 90-DEGREES 33

NEW DESTACO 861 PNEUMATIC ACTION CLAMP,865,102000, 3000 LBS, 90-DEGREES 33

  • Beltsville, Maryland, United States
  • Jan 30th
USED KENNAMETAL DA300 1"-SHANK COLLET CHUCK EXTENSION DA-300 SS100DA301544

USED KENNAMETAL DA300 1"-SHANK COLLET CHUCK EXTENSION DA-300 SS100DA301544

  • Fairfield, Iowa, United States
  • Jan 30th
Valenite CAT 50 Taper Collet Chuck, V50CT-SAC16-394A

Valenite CAT 50 Taper Collet Chuck, V50CT-SAC16-394A

  • Mercersburg, Pennsylvania, United States
  • Jan 30th
ER-32 BT30 Spring Collet Chuck

ER-32 BT30 Spring Collet Chuck

  • Chino, California, United States
  • Jan 30th
COLLET #10 BROWN & SHARPE 29/64" ROUND FOR AUTOMATIC & SCREW MACHINE #8241

COLLET #10 BROWN & SHARPE 29/64" ROUND FOR AUTOMATIC & SCREW MACHINE #8241

  • Resaca, Georgia, United States
  • Jan 30th
COLLET TG150 CARBOLOY 31/32" COLLET #7121

COLLET TG150 CARBOLOY 31/32" COLLET #7121

  • Resaca, Georgia, United States
  • Jan 30th
COLLET #10 HARDINGE 5/16" SQUARE FOR AUTOMATICS AND SCREW MACHINES #8252

COLLET #10 HARDINGE 5/16" SQUARE FOR AUTOMATICS AND SCREW MACHINES #8252

  • Resaca, Georgia, United States
  • Jan 30th
Omer E. Robbins Co. Compound Sine Plate 7-3/4 X 12inches Model-A-10

Omer E. Robbins Co. Compound Sine Plate 7-3/4 X 12inches Model-A-10

  • Machesney Park, Illinois, United States
  • Jan 30th
Spin Fixture, Index Fixture

Spin Fixture, Index Fixture

  • Watertown, Connecticut, United States
  • Jan 30th
LASSY HOLDING FIXTURE for LATHE,MILLING MACHINE or DRILL PRESS,MOTHER-IN-LAW

LASSY HOLDING FIXTURE for LATHE,MILLING MACHINE or DRILL PRESS,MOTHER-IN-LAW

  • Warrington, Pennsylvania, United States
  • Jan 30th
50 Clecos- 5/32" #21 Black Standard Cleco With 0-1/4" Grip comes with Pliers

50 Clecos- 5/32" #21 Black Standard Cleco With 0-1/4" Grip comes with Pliers

  • Mineral Wells, Texas, United States
  • Jan 30th
SRP-62 STEEL REST PAD FAIRLANE

SRP-62 STEEL REST PAD FAIRLANE

  • Hillside, Illinois, United States
  • Jan 30th
Lot of 32 collets ALMOST A FULL SET

Lot of 32 collets ALMOST A FULL SET

  • Lebanon, Pennsylvania, United States
  • Jan 30th
Antique Vintage Nye Tool Works 110 Bench Mount Yoke Pipe Vise 1/8"-3" cap

Antique Vintage Nye Tool Works 110 Bench Mount Yoke Pipe Vise 1/8"-3" cap

  • Los Angeles, California, United States
  • Jan 30th
Bridgeport Vise with Swivel Base (Inv.31937)

Bridgeport Vise with Swivel Base (Inv.31937)

  • Portland, Connecticut, United States
  • Jan 30th
6" x 8" CNC Machine Vise system, matched vise bases +/- 0.0004" , #1202-1025

6" x 8" CNC Machine Vise system, matched vise bases +/- 0.0004" , #1202-1025

  • TORONTO, ONTARIO, Canada
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies