5 hp electric motor 1725 rpm single phase for sale, brand-new and used.

 Description: 2-lug flange mounted Split-phase Manual reset overload protection Totally enclosed non-ventilated (TENV) when mounted 1.0 Service Factor 60 Hz 40°C rise Diameter: 5-5/8"; HP: 1/6; Volts: 115; RPM: 1725; Speeds: 1; F/L Amps: 3.3; Shaft Diam.: 1/2"; Shaft Length: 1-7/8"; Rot.: Rev.; F: 7-1/4"; Bearing Type: Slv; Wt.

NEW!!

Industrial Equipment Expert, LLC Industrial Equipment Expert is a Leading provider of Quality industry equipment such as air compressor, accessories and parts, drywall tools, etc.

This is a 2 HP single phase motor 115/230 that has seen light use. I mounted it on my lathe for a short time before changing it out for a variable DC motor. This motor runs strong and quiet.

G.E. motor, General Electric, GE motor, 1/3hp, .33 hp, 1725 rpm, 1750rpm, 1800rpm, 48 frame, 230 volts, 230vac, 1 phase, 1ph, 60 hz, 60hz, TEAO, catalog #H141, 48 frame, cradle base, resilient base mounting, base mount, .33hp, 1725rpm, 1750 rpm, 1800 rpm, 48 frame foot mount, G.E., General Electric, .33hp, 1/3 hp, 1 ph, 1725rpm, G.E., TEAO enclosure, cont air over, continuous air over frame, UGL072119, stock no.

1/2 hp electric motor 1725 rpm 115/230 5/8 shaft singel phase MODEL 36549 VOLTS 115/230 RPM 1725 SHAFT 5/8” LENGTH 11” CENTER HIGHT 3-7/16”

1/2 horse power industrial motor by Baldor - 1750 rpm - frame 56 - single phase and you can change the voltage from 115 to 208, or 230 volts - reversible too, can spin either direction - has a 115 VAC grounded plug - shaft diameter is 5/8 inches - keyed. -- 14 day warranty -- Be sure to check all the specs before you buy to make sure this will work for your application.

Tested and working GE A.C MotorModel 27468Type: SAFrame 147Form DBVolts 110Amps 5.41/4 horsepowerspeed 1725single phaseOver 15 feet of power cord new_dfb_templateend_display_feedback_code_window

FREE BONUS !!!@@@JET 60-6120 120 Grit Ready-to-Wrap Abrasive Sandpaper Product Description

Baldor 3/4 HP electric motor. 1725 RPM, Single Phase, 115/ 230 vac, reversible rotation. Totally enclosed Explosion proof.

This is a Heavy Very Very nice Baldor Motor Made in the USA LIGHTLY USED from a Wood Lathe. Retails new for over $300 Some dust and dirt wear and tear scratches but In good working shape. It has a 5/8" diameter keyed shaft @ 1 3/4" Long with key and an on/off switch.

This is a Heavy nice Baldor Motor Made in the USA USED from a Wood Lathe. Some dust and dirt wear and tear scratches but In good working shape.Some wear on shaft but very usable It has a 5/8" diameter keyed shaft @ 2 1/2" Long overall 1 7/8" with key slot Has an on/off switch.Is reversible currently wired Clockwise (right handed) at shaft end. The motor is single phase 1725 RPM Dual Voltage 115/230 wired 115 curr

This is a Vintage Strong running 1/4 Horsepower General Electric motor from a Wood Lathe. Comes as pictured with an on/off switch mounting bracket and clips and Bolts as pictured. Has a 1/2" diameter shaft flat sided about 1 3/4" long 1/4 Horsepower 115 Volt 60 Hz 1725 RPM 5.6 amp single phase Reversible Currently wired clockwise (Right handed at shaft end).

This unit works perfectly. I removed it from an AT&T service van. The generator in the van only has 172 hours on it so this unit has not been used much.

This is a strong running Heavy electric motor from a NOS New OLD Stock vintage unused lathe and motor from a Sears Craftsman 12" Wood Lathe Model # 113.228160 Some dust and dirt but in very good working condition. 1/2 Horsepower single phase 1725 RPM 115 Volt 8.8 amp 60 cycle. Has a 5/8" diameter shaft with a key slot and key about 2" long overall.

This is a strong running Heavy electric motor from a vintage Sears Craftsman 12" Wood Lathe Model # 149-23871 with twin 1" diameter tubular bed rails. Wear and tear dust and dirt rust and pitting but in good working condition. 1/2 Horsepower single phase 1725 RPM 115 Volt 7.5 amp 60 cycle.

For your consideration is an older model single phase Dayton Capacitor Start AC Motor. The tag reads No 5K457 HP3/4 Volts 115/230 Amps 11.6/5.8 RPM 1750 Temp Rise 50 Cont Cyc 60 Code J Frame I56 Bearings Sleeve Model KS60BND-1862 MFG F6497.  This m

Increase traffic to your listing with Auctiva's

Craft - Master 1/4 HP Single Shaft Electric Motor. Unit does work. Split phase, 1/4 hp, 115 volt, 60 CYC., 4.8 amp, 1725 RPM, MFG # R S1S-1

For Sale is a new Baldor Electric Motor for pressure washers or other uses. Baldor is an industry leader in Industrial grade electric motors. You can feel confident in their quality.