5 pack 1/8" x 7-8" x 30 Thin Red Oak Boards laser craft wood scroll saw (#B34x5), US $30.98 – Picture 0

5 pack 1/8" x 7-8" x 30 Thin Red Oak Boards laser craft wood scroll saw (#B34x5), US $30.98 – Picture 1

5 pack 1/8" x 7-8" x 30 Thin Red Oak Boards laser craft wood scroll saw (#B34x5), US $30.98 – Picture 2

5 pack 1/8" x 7-8" x 30 Thin Red Oak Boards laser craft wood scroll saw (#B34x5), US $30.98 – Picture 3

5 Pack 1/8" X 7-8" X 30 Thin Red Oak Boards Laser Craft Wood Scroll Saw (#b34x5)

US $30.98

Antioch, Illinois, United States
Feb 14th

Open on mobile:
QR code

This Listing | Shipping | Need other thin boards? | International shipping? | What about full thickness lumber? | Know your lumber terms.... In this listing I'm selling Packs of 5 Red Oak boards that measure 1/8" thick x 30" long, and between 7-8" wide. Sanded on both sides, ready to use. Just change the quantity field above, to select multiple packs of 5. Send me a message, if you wish. Contact me slim.sim.89...friends call me "Slim". I've got almost any species you need, in any size. I specialize in thin boards. The photos are examples of my red oak boards. You will not get those exact boards, however, I guarantee your satisfaction. These are perfect for you scroll saw experts, or for laser owners. If your item arrives, and you're unhappy with it, just drop me a message, and we'll work it out. Please don't open a case with eBay, and make things messy. I'm a woodworker too, and I'm not here to rip anyone off. I'm a nice guy...I really am, so just drop me a message. Free If you need other thin wood, then you've come to the right place. I have almost all domestic species, in any width, length, and thickness you need. Just send me an eBay message, and I'll get you taken care of. I do custom cutting all the time, and post what you need right up here. Scroll saw folks love us, because we have wood 1/16" thick, on up. I carry Aspen, Black Walnut, Black Cherry, Red Oak, White Oak, Maple, Poplar, Alder, Red and Grey Elm, White Ash, Purpleheart, Bloodwood, Knotty Pine, Mahogany, and many, many more. Yup, we do that too. We ship worldwide. Our biggest international buyer seems to be Australia, but we love all our international shoppers. Yup, we have that too. I carry Aspen, Black Walnut, Black Cherry, Red Oak, White Oak, Maple, Poplar, Alder, Red and Grey Elm, White Ash, Purpleheart, Bloodwood, Knotty Pine, Mahogany, and many, many more. Some of it up to 12/4 thickness (that's 3"). 4/4, 5/4, 6,4, etc. Lumber, when purchased from the saw mill, is measured in "Quarters". When you see the term "4/4", you call that "four quarters". 5/4 is Five Quarters. 6/4 is Six Quarters. If the sawmill operator wants to cut a 1" board off the log, he sets his gauges to read "four quarters", or "4/4". If he wants a board 1.25" thick, he sets his sawmill thickness gauge to 5/4. If he's after a board 2" thick, he'd set the gauge to 8/4, and he'd call that "an eight quarter board". Board Foot If you take the length of a board (in inches), and multiply it by the width of the board (in inches), and it's a 1" (or 4/4...same thing) board, and then divide that by 144, your resulting number is the number of "board feet" in that board. For a board 4 feet long, and 6 inches wide, and 1" thick, the formula is (48 x 6 x 1 )/ 144, or 2 board feet. If that board was a "six quarter" board (6/4)...which we know is 1.5" thick, the formula would be 48 x 6 x 1.5 / 144. Square Feet Exactly as above, except you leave out the thickness in all cases. Thickness is ignored. Square Feet, is a surface measurement. Ripping a board If you took a board that was 8 feet long, and 6" wide, and cut it such that you now had two 8 foot boards, each being about 3" wide, you would need to perform a ripping cut on that board. In other words, a rip cut, is a lengthwise cut on a board. Cross Cut Is a cut "across" the width of a board. It would be like cutting an 8 foot board, into two 4 foot pieces. One cross cut, midway on the board, would give you two 4 foot pieces. Planing When a board comes direct from the sawmill, the faces of the board is often very rough. To get it smooth, it's run through a "planer". The act of doing so, is called "planing the board smooth". When you buy a board at your hardware store, it is usually already planed on both sides. When your hardware store buys their lumber, they buy 4/4 boards, and plane them down to 3/4"....and then tell you it's a 1" thick board. Hardware stores have problems measuring. Jointing Woodshops have a machine called a "jointer". It's purpose is to get the edges of a board nice and smooth. Often times, a scroll sawyer will put a frame around his scroll sawed art work, thus hiding the edges of the board. So, scroll sawyers will often not care if their boards are jointed, or not. Most of our boards are jointed, sometimes not. If clean edges matter to you, then ask if your boards will be jointed. IndexCardFlexTabs from Shipscript Powered by SixBit's eCommerce Solution

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Need wood? I'm the man....”