5 Pcs Atmel Attiny2313 Attiny2313a-20pu 20mhz Avr --usa

US $30

San Jose, California, United States
Jan 29th

Open on mobile:
QR code

NOTE: NOT SOLD TO CALIFORNIA BUYERS. This listing is for 5 brand new (from manufacturer) pieces of the ATTINY2313A-20PU. The ATTINY2313A is better than the old ATTINY2313 in terms of power usage and power saving feature(s). Remember this is the 20Mhz version not lower clock version like you see from other sellers. Terms: No returns. No insurance provided. Brand new and are blank from manufacturer. IMPORTANT: Please read the spec carefully before using this item. Seller holds NO responsibility if the item is misued and/or abused by the buyer. Full specification is at http://www.atmel.com/Images/8246s.pdf See other links: -Complete support of this micro-controller at www.avrfreaks.net, compiler, technical info., etc. FEATURES: High Performance, Low Power AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 120 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz • Data and Non-volatile Program and Data Memories – 2/4K Bytes of In-System Self Programmable Flash • Endurance 10,000 Write/Erase Cycles – 128/256 Bytes In-System Programmable EEPROM • Endurance: 100,000 Write/Erase Cycles – 128/256 Bytes Internal SRAM – Programming Lock for Flash Program and EEPROM Data Security • Peripheral Features – One 8-bit Timer/Counter with Separate Prescaler and Compare Mode – One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Modes – Four PWM Channels – On-chip Analog Comparator – Programmable Watchdog Timer with On-chip Oscillator – USI – Universal Serial Interface – Full Duplex USART • Special Microcontroller Features – debugWIRE On-chip Debugging – In-System Programmable via SPI Port – External and Internal Interrupt Sources – Low-power Idle, Power-down, and Standby Modes – Enhanced Power-on Reset Circuit – Programmable Brown-out Detection Circuit – Internal Calibrated Oscillator • I/O and Packages – 18 Programmable I/O Lines – 20-pin PDIP, 20-pin SOIC, 20-pad MLF/VQFN • Operating Voltage – 1.8 – 5.5V • Speed Grades – 0 – 4 MHz @ 1.8 – 5.5V – 0 – 10 MHz @ 2.7 – 5.5V – 0 – 20 MHz @ 4.5 – 5.5V • Industrial Temperature Range: -40°C to +85°C • Low Power Consumption – Active Mode • 190 ?A at 1.8V and 1MHz – Idle Mode • 24 ?A at 1.8V and 1MHz – Power-down Mode • 0.1 ?A at 1.8V and +25°C