+ Post new Ad
5 Pcs HSS 5/16 X 32 UNEF Thread Taps 4 flutes NEW, US $14.99 – Picture 0
5 Pcs HSS 5/16 X 32 UNEF Thread Taps 4 flutes NEW, US $14.99 – Picture 1
5 Pcs HSS 5/16 X 32 UNEF Thread Taps 4 flutes NEW, US $14.99 – Picture 0
5 Pcs HSS 5/16 X 32 UNEF Thread Taps 4 flutes NEW, US $14.99 – Picture 1

5 Pcs Hss 5/16 X 32 Unef Thread Taps 4 Flutes New

US $14.99

  • Kapurthala, Punjab, India
  • Jan 30th
Open on mobile:
QR code
   HSS 5/16 X 32 UNEF Thread Tap 4 flutes *** 5 Pcs Per Pack *** Size - 5/16 x 32 UNEF Chamfer - Bottom, Plug or Taper taps can be supplied. Please mention while ordering otherwise Bottom Taps will be supplied. Over All Length - 69mm Thread Length - 19mm Shank Dia. - 8mm Square Size - 6.30mm Material - HSS   We ship anywhere in world within a short time on high priority basis . YOU WILL GET TRACKING NO AFTER WE SHIP PRODUCT           We will make you sure that you will receive the product in Good Condition (FeedBack) Your *feedback is important for us to grow our business on eBay, so please do leave feedback.   Payment is accepted by PayPal only.PayPal is the safest mode of payments. Important Note For Buyers At time of buying please provide us with your telephone numbers .Some times required for delivery or customs purpose.  In case of no-delivery /late delivery for .wrong address mentioned at time of purchase any additional cost to be beared by buyer     In some of the cases goods subject to import duties,taxes etc at buyers country  to be paid by buyer only. Return Policy We usually do our best to serve you more then your expedition.  Your positive feedback is very important for us.     In case of some issue do contact us for resolving your problem.     Product must be returned with in 14 days of receiving in the same condition dispatched by any use or alteration is not acceptable.     The refund would be issued in 7 business days after receipt of the product.All refunds are subjected to deduction of eBay fees,Paisa pay charges,PayPal fees etc.     "BUYER  HAD  TO  PAY  RETURN  POSTAGE
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand APL
Country of Manufacture India
Country/Region of Manufacture India

Directions

Similar products from Hand Thread Taps

Hanson 1361 High Carbon Steel Machine Screw Fractional Taper Tap 7/8"-9 Nc

Hanson 1361 High Carbon Steel Machine Screw Fractional Taper Tap 7/8"-9 Nc

  • United States
  • Jan 30th
External Thread Repair Tool 5/32" To 11/16" (nes1a)

External Thread Repair Tool 5/32" To 11/16" (nes1a)

  • United States
  • Jan 30th
Hanson 1439 High Carbon Steel Machine Screw Fractional Plug Tap 7/16"-14 Nc

Hanson 1439 High Carbon Steel Machine Screw Fractional Plug Tap 7/16"-14 Nc

  • United States
  • Jan 30th
Hanson 1344 High Carbon Steel Machine Screw Fractional Taper Tap 1/2"-13 Nc

Hanson 1344 High Carbon Steel Machine Screw Fractional Taper Tap 1/2"-13 Nc

  • United States
  • Jan 30th
Hanson 1513 3/16" 32 Ns Bottom Tap

Hanson 1513 3/16" 32 Ns Bottom Tap

  • United States
  • Jan 30th
Hanson 1011 4-36 Ns Taper Tap

Hanson 1011 4-36 Ns Taper Tap

  • United States
  • Jan 30th
Hanson 1434 High Carbon Steel Machine Screw Fractional Plug Tap 3/8"-16 Nc

Hanson 1434 High Carbon Steel Machine Screw Fractional Plug Tap 3/8"-16 Nc

  • United States
  • Jan 30th
5 Pcs HSS 5/16 X 22 BSF Bottom Thread Tap 4 flutes

5 Pcs HSS 5/16 X 22 BSF Bottom Thread Tap 4 flutes

  • Kapurthala, Punjab, India
  • Jan 30th
HSS 1/2 x 12 BSW Bottom thread tap 4 flutes

HSS 1/2 x 12 BSW Bottom thread tap 4 flutes

  • Kapurthala, Punjab, India
  • Jan 30th
HSS Pg 11 Bottom thread tap 4 flutes NEW

HSS Pg 11 Bottom thread tap 4 flutes NEW

  • Kapurthala, Punjab, India
  • Jan 30th
Hanson 1327 High Carbon Steel Machine Screw Fractional Taper Tap 5/16"-18 Nc

Hanson 1327 High Carbon Steel Machine Screw Fractional Taper Tap 5/16"-18 Nc

  • United States
  • Jan 30th
Hanson 1349 High Carbon Steel Machine Screw Fractional Taper Tap 9/16"-18 Nf

Hanson 1349 High Carbon Steel Machine Screw Fractional Taper Tap 9/16"-18 Nf

  • United States
  • Jan 30th
Hanson 1560 High Carbon Steel Machine Screw Fractional Bottom Tap 3/4"-16 Nf

Hanson 1560 High Carbon Steel Machine Screw Fractional Bottom Tap 3/4"-16 Nf

  • United States
  • Jan 30th
Irwin Industrial Tool Co 11018 Sae Thread Gauge

Irwin Industrial Tool Co 11018 Sae Thread Gauge

  • United States
  • Jan 30th
1"-11-1/2 NPT BESLY TAP used

1"-11-1/2 NPT BESLY TAP used

  • Oakdale, Pennsylvania, United States
  • Jan 30th
Vintage Besly Bendix Turbo Cut 5/8 11 NC GH5 4 Flute Tap

Vintage Besly Bendix Turbo Cut 5/8 11 NC GH5 4 Flute Tap

  • Scranton, Pennsylvania, United States
  • Jan 30th
Vintage Besly Bendix Turbo Cut 5/8-18 NF HS GH5 4 Flute Stainless Bottoming Taps

Vintage Besly Bendix Turbo Cut 5/8-18 NF HS GH5 4 Flute Stainless Bottoming Taps

  • Scranton, Pennsylvania, United States
  • Jan 30th
Besly Bendix Turbo Cut 1/2-20 NF GH5 3 Flute Stainless Bottoming Taps

Besly Bendix Turbo Cut 1/2-20 NF GH5 3 Flute Stainless Bottoming Taps

  • Scranton, Pennsylvania, United States
  • Jan 30th
NEW SURPLUS BESLY USA METRIC M20 x 2.5 SPIRAL FLUTE BOTTOMING HAND TAP HS D7

NEW SURPLUS BESLY USA METRIC M20 x 2.5 SPIRAL FLUTE BOTTOMING HAND TAP HS D7

  • Fairfield, Iowa, United States
  • Jan 30th
THREADWELL 1/2-24 NS Special Thread Plug Tap HSS 4 Flute NEW

THREADWELL 1/2-24 NS Special Thread Plug Tap HSS 4 Flute NEW

  • Middlebury, Indiana, United States
  • Jan 30th

People who viewed this item also vieved

9 NEW TRW GREENFIELD 8-32NC H3 GUN TAPS

9 NEW TRW GREENFIELD 8-32NC H3 GUN TAPS

  • Dunedin, Florida, United States
  • Jan 30th
12 NEW TRW GREENFIELD 4-40NC H2 GUN TAPS

12 NEW TRW GREENFIELD 4-40NC H2 GUN TAPS

  • Dunedin, Florida, United States
  • Jan 30th
11 NEW TRW GREENFIELD 6-32NC H3 TAPS

11 NEW TRW GREENFIELD 6-32NC H3 TAPS

  • Dunedin, Florida, United States
  • Jan 30th
3 pieces hand tap 7/16" -20 H5 GH NF 4 flutes R&N 032081 unused (Loc10)

3 pieces hand tap 7/16" -20 H5 GH NF 4 flutes R&N 032081 unused (Loc10)

  • Saint Louis, Missouri, United States
  • Jan 30th
LOT 90 MACHINIST LATHE MILL MACHINIST TAPS

LOT 90 MACHINIST LATHE MILL MACHINIST TAPS

  • Staten Island, New York, United States
  • Jan 30th
Lawson Products Screw Extractor Kit, Straight, Part #97045, 6 Pc.

Lawson Products Screw Extractor Kit, Straight, Part #97045, 6 Pc.

  • Newbern, Tennessee, United States
  • Jan 30th
VEGA HP 3/8 - 26 NC GH3 Tap

VEGA HP 3/8 - 26 NC GH3 Tap

  • Houston, Texas, United States
  • Jan 30th
PWZ 3/8 - 16 UNC-3B Tap

PWZ 3/8 - 16 UNC-3B Tap

  • Houston, Texas, United States
  • Jan 30th
Spiralock M7 3/8 - 24 SPL BT Tap

Spiralock M7 3/8 - 24 SPL BT Tap

  • Houston, Texas, United States
  • Jan 30th
6-32 X .138 HELICOIL MS 21208C060L 50 PCS

6-32 X .138 HELICOIL MS 21208C060L 50 PCS

  • San Carlos, California, United States
  • Jan 30th
1 NOS 3/8" - 18 NPT Extra LONG Shank TAPER PIPE TAP 4 Flute 12" OAL Item 2A38

1 NOS 3/8" - 18 NPT Extra LONG Shank TAPER PIPE TAP 4 Flute 12" OAL Item 2A38

  • Perth, Ontario, Canada
  • Jan 30th
1 NOS 1/8" NPT Extra LONG Shank TAPER PIPE TAP 4 Flute 12" OAL Item 2A39

1 NOS 1/8" NPT Extra LONG Shank TAPER PIPE TAP 4 Flute 12" OAL Item 2A39

  • Perth, Ontario, Canada
  • Jan 30th
1 NOS 1/2" - 14 NPT Extra LONG Shank TAPER PIPE TAP 4 Flute 12" OAL Item 2A37

1 NOS 1/2" - 14 NPT Extra LONG Shank TAPER PIPE TAP 4 Flute 12" OAL Item 2A37

  • Perth, Ontario, Canada
  • Jan 30th
OSTER QUAD AND SYMBOL 300 PIPE cutting DIES 15 sets of 4 2 RS NC

OSTER QUAD AND SYMBOL 300 PIPE cutting DIES 15 sets of 4 2 RS NC

  • Mexico, Missouri, United States
  • Jan 30th
vpt nut slitter set in box

vpt nut slitter set in box

  • Groveport, Ohio, United States
  • Jan 30th
1 PIECE M12 X 1.75 MM METRIC GH8 3 FLUTE SPPT PLUG TIN COATED TAP GREENFIELD

1 PIECE M12 X 1.75 MM METRIC GH8 3 FLUTE SPPT PLUG TIN COATED TAP GREENFIELD

  • Mentor, Ohio, United States
  • Feb 26th
1 PIECE 9/16"-18 GH3 3 FLUTE BOTTOM FAST SPIRAL STYLE GREENFIELD TAP

1 PIECE 9/16"-18 GH3 3 FLUTE BOTTOM FAST SPIRAL STYLE GREENFIELD TAP

  • Mentor, Ohio, United States
  • Feb 26th
1 PIECE 3/4"-16 GH6 6 FLUTE SPIRAL POINT PLUG STYLE GREENFIELD TAP

1 PIECE 3/4"-16 GH6 6 FLUTE SPIRAL POINT PLUG STYLE GREENFIELD TAP

  • Mentor, Ohio, United States
  • Feb 26th
1 PIECE 3/4"-10 GH5 4 FLUTE BOTTOM FAST SPIRAL CNC GREENFIELD TAP

1 PIECE 3/4"-10 GH5 4 FLUTE BOTTOM FAST SPIRAL CNC GREENFIELD TAP

  • Mentor, Ohio, United States
  • Feb 26th
1 PIECE M6 X 1.0 D5 SPIRAL POINT CNC TIN COATED GREENFIELD TAP

1 PIECE M6 X 1.0 D5 SPIRAL POINT CNC TIN COATED GREENFIELD TAP

  • Mentor, Ohio, United States
  • Feb 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies